• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.181-183
• /
• 2011

This study was carried out about construction management plan to reduce water leakage of underground parking lot in the apartment housing. To minimize effect of upper working load, installation position of jack support and paving with rubble on the top of underground parking lot were studied. By calculation shrinkage strain of underground parking lot scale, water leakage risk in design of level difference was studied. In this study, the basic data about construction management was provided to reduce water leakage of underground parking lot in the apartment housing.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.212-219
• /
• 2021

운송차량에 의한 화학사고는 매년 전체 화학사고의 20 %를 차지하지만 영향평가 정보를 알 수 없는 상황이 반복되어 사고대응 과정에서 어려움을 겪게 되는 문제점이 존재한다. 본 연구에서는 국내 사용량이 많고 사고 위험성이 높으며, 최근 7년간 사고 빈도가 높은 염소와 불화수소를 대상으로 탱크로리로 운반하는 과정에서 누출사고가 발생하였을 경우 현장에서 이격거리 산정을 위하여 활용될 수 있는 피해예측범위 산정표 및 산정식을 개발하였다. 화학물질의 누출속도와 기상조건 중 풍속, 온도에 따른 산정표를 조사하였으며, 산정표를 적용하기 힘든 특수한 상황에서는 산정식을 적용할 수 있도록 통계 프로그램 R을 사용하여 산정식을 도출하였다. 유관기관에서는 현장에서 연구에서 도출된 산정표 및 산정식을 활용하면 화학사고 피해 최소화 및 이격거리 설정, 주민대피 결정 등의 의사결정 측면에서 중요한 정보로써 사용할 수 있을 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.948-950
• /
• 2005

This paper compared the test data with the loss when a conductor is exposed to the magnetic fieldof reactors after generating external magnetic field in specimen by means of an air core reactor model and the calculation of loss came from a tying the combination of FEM and integral method. It was applied to the loss measurement of transformers due to leakage flux.

• International Journal of Contents
• /
• 제14권4호
• /
• pp.65-69
• /
• 2018

The objective of this study was to conduct a radiation shielding analysis for the facility equipped with radiation generator. The analysis was carried out in two aspects. First, from the aspect of the effect caused by primary and leakage radiation. Second, effect of scattered radiation was evaluated by applying a simple calculation method based on a scattering rate concept since effect of scattered radiation is significantly important at maze entrance of the radiation facility. The calculated results obtained using the simple method were compared to the results calculated using Geant4 code and the measured values. The results calculated by the suggested method indicate that slight error exists in a radiation shielding analysis done at the maze entrance comparing to other two results, while the results evaluated at the outside of the maze entrance door are relatively consistent with other values.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제23회 학술대회
• /
• pp.41-46
• /
• 1996

For a vertical type crankshaft-journal bearing system used in scroll compressor, nonlinear transient response analysis is applied includung nonlinear fluid film reaction forces of journal beatings. By a connected behavior analysis of crankshaft and orbiting scroll, the radial clearance of scroll wraps is calculated. Considering tangential leakage for this clearance, a coupled analysis model for leakage and dynamic behavior of the orbiting scroll is made, and analyzed by iterative calculation. By regarding clearances of main, sub bearing of crankshaft and orbiting scroll shaft bearing clearance as design parameters, the radial clearance of scroll wraps is analyzed.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3543-3562
• /
• 2021

The methods and performance of a 3D pin-by-pin neutronics code based on the 2D/1D decoupling method are presented. The code was newly developed as an effort to achieve enhanced accuracy and high calculation performance that are sufficient for the use in practical nuclear design analyses. From the 3D diffusion-based finite difference method (FDM) formulation, decoupled planar formulations are established by treating pre-determined axial leakage as a source term. The decoupled axial problems are formulated with the radial leakage source term. To accelerate the pin-by-pin calculation, the two-level coarse mesh finite difference (CMFD) formulation, which consists of the multigroup node-wise CMFD and the two-group assembly-wise CMFD is implemented. To enhance the accuracy, both the discontinuity factor method and the super-homogenization (SPH) factor method are examined for pin-wise cross-section homogenization. The parallelization is achieved with the OpenMP package. The accuracy and performance of the pin-by-pin calculations are assessed with the VERA and APR1400 benchmark problems. It is demonstrated that pin-by-pin 2D/1D alternating calculations within the two-level 3D CMFD framework yield accurate solutions in about 30 s for the typical commercial core problems, on a parallel platform employing 32 threads.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1106-1112
• /
• 1999

Substantial losses behind axial flow rotor are generated by the wake, various vortices in the hub region and the tip leakage vortex in the tip region. Particularly, the leakage vortex formed near blade tip is one of the main causes of the reduction of performance, generation of noise and aerodynamic vibration in downstream. In this study, the three-dimensional flow fields in an axial flow rotor were calculated with varying tip clearance under various flow rates, and the numerical results were compared with experimental ones. The numerical technique was based on SIMPLE algorithm using standard $k-{\varepsilon}$ model(WFM) and Launder & Sharma's Low Reynolds Number $k-{\varepsilon}$ model(LRN). Through calculations, the effects of tip clearance and attack angle on the 3-dimensional flow fileds behind a rotor and leakage flow/vortex were investigated. The presence of tip leakage vortex, loci of vortex center and its behavior behind the rotor for various tip clearances and attack angles was described well by calculation.

• 한국화재소방학회논문지
• /
• 제27권2호
• /
• pp.46-53
• /
• 2013

건축의 환경이 변하면 그에 따른 설계기준도 변하여야 한다. 방화문의 시험기준이 2005년 7월 27일 차연성 시험이 적용되면서 문틈이 기밀한 구조로 바뀌었다. 그러나 국가화재안전기준은 영국의 자료를 인용한 과거의 문틈규정을 적용함으로서 현실과 설계 규정의 차이가 오차나 안전율 이상으로 과도하다. 설계와 현실의 차이로 인하여 발생하는 결과 및 현상을 분석하고 개정되어야 할 국가화재안전기준의 누설틈새면적 계산법을 제시하고 연돌효과로 인한 방연풍속의 차이를 분석하였으며 생활패턴 및 피난패턴을 반영한 공동주택의 방연풍속 측정법에 대해 고찰하고 합리적인 측정법을 제시하였다.

• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.1950-1958
• /
• 2024

For the pressurized water reactor two-step calculation, the traditional assembly homogenization and two-group neutron diffusion calculation have been widely used. When it comes to the core pin-by-pin simulation, many models and techniques are different and unsettled. In this paper, the homogenization methods based on the pin discontinuity factors and super homogenization factors are used to get the pin-cell homogenized parameters. The heterogeneous leakage model is applied to modify the infinite flux spectrum of the single assembly with reflective boundary condition and to determine the diffusion coefficients for the SP3 solver which is used in the core simulation. To reduce the environment effect of the single-assembly reflective boundary condition, the online method for the SPH factors updating is applied in this paper, and the functionalization of SPH factors based on the least-squares method will be pre-made alone with the table of the group constants. The fitting function will be used to update the thermal-group SPH factors with a whole-core pin-by-pin homogeneous solution online. The three-dimensional Watts Bar Nuclear Unit 1 (WBN1) problem was utilized to test the performance of pin-by-pin calculation. And numerical results have demonstrated that PWR pin-by-pin core calculation has more accurate results compared with the traditional assembly-homogenization scheme.

• 조명전기설비학회논문지
• /
• 제24권1호
• /
• pp.124-129
• /
• 2010

페놀수지가 그 표면에 흐르는 누설전류에 의하여 탄화되는 경우 탄화패턴은 페놀수지의 탄화특성을 결정하는 가장 중요한 인자 중의 하나이다. 그러나 전형적인 페놀수지의 탄화패턴은 매우 복잡하기 때문에 종래의 유클리드 기하학을 이용하여 해석하는 것은 어려운 일이다. 이와 같이 복잡한 형태는 대부분의 경우 프랙탈 구조를 나타낸다. 따라서 주어진 페놀수지에 대한 탄화패턴의 특성을 프랙탈 해석으로 규명할 수 있다. 본 논문에서는 누설전류에 의하여 탄화된 페놀수지의 탄화패턴을 정량적으로 조사하기 위하여 누설전류의 크기와 전극간격의 함수로서 탄화패턴의 프랙탈 차원을 계산하였다. 계산의 신뢰성을 위하여 박스 카운팅 방법뿐만 아니라 상관함수를 이용하여 프랙탈 차원을 구하였다. 계산 결과에 따르면 전극간격을 일정하게 유지한 상태에서 전류가 증가하면 프랙탈 차원은 증가하였다. 반면, 전류가 일정할 때 전극간격과 프랙탈 차원 사이에는 큰 관련성이 없었다.