• Journal of applied mathematics & informatics
• /
• 제33권5_6호
• /
• pp.485-502
• /
• 2015

A computational method for solving singularly perturbed boundary value problem of differential equation with shift arguments of mixed type is presented. When shift arguments are sufficiently small (o(ε)), most of the existing method in the literature used Taylor's expansion to approximate the shift term. This procedure may lead to a bad approximation when the delay argument is of O(ε). The main idea for this work is to deal with constant shift arguments, which are independent of ε. In the present method, we construct the formally asymptotic solution of the problem using the method of composite expansion. The reduced problem is solved numerically by using operator compact implicit method, and the second problem is solved analytically. Error estimate is derived by using the maximum norm. Numerical examples are provided to support the theoretical results and to show the efficiency of the proposed method.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.102-110
• /
• 2001

In this paper, methods to analyze wire sweep and paddle shift during the semiconductor ship-encapsulation process have been studied. The analysis of wire sweep includes flow-field analysis in a complicated geometry, drag-force calculation for given flow of fluid, and wire-deformation calculation for given loads. The paddle-shift analysis is used to analyze the deformation of the paddle due to the pressure difference in two cavities. the analysis is done using either analytical solutions or numerical simulation. The analytical solution is used for rough but fast calculation of wire sweep. The numerical solution is used for more accurate calculation of wire-sweep. The numerical results of wire sweep show good agreements with the experimental ones.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.258-265
• /
• 1998

Seismic isolation has developed to the point where it may be considered as a viable design alternate for a wide range of building structures. However, it needs to consider various aspects to adopt a suitable isolation system for buildings practically. This report presents the basis for the preliminary design procedure which has been developed for the seismic isolation system using the lead rubber bearings. The design procedures have been developed to ensure that the bearings will safely support the maximum gravity load throughout the life of the structure while they provide a period shift and hysteretic damping during the design earthquake.

• 한국직업건강간호학회지
• /
• 제29권4호
• /
• pp.306-315
• /
• 2020

Purpose: This study was conducted to identify the effects of caffeine intake by shift workers on sleep, considering various variable related to the sleep health of shift workers. Methods: A descriptive survey study was conducted with 128 employees who worked shifts. Respondents were surveyed on their of caffeine intake behavior, schedule type, quality of sleep, health promotion behavior, and occupational stress. Differences in their quality of sleep were assessed using the t-test and analysis of variance, while factors influencing the effect of caffeine intake on the quality of sleep were analyzed using hierarchical logistic regression. Results: The average Pittsburgh Sleep Index, Korean Version score of those surveyed was 7.3±3.25, indicating that their quality of sleep was low. On the other hand, their aveage daily intake of caffeine was 1.6±0.99 cups (1 cup =150 mL) and 116.4±77.58 mg/dL of caffeine. When the various variables that could have affected the quality of sleep were corrected, an increase in the amount of caffeine consumed was found to lead to a decrease in the quality of sleep (p=.015). Conclusion: Caffeine intake by shift workers has a significant bearing on their quality of sleep; therefore, such intake should be adjusted to improve their sleep health.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.21-26
• /
• 2007

This paper presents an impedance-based structural health monitoring (SHM) technique considering temperature effects. The temperature variation results in a significant impedance variation, particularly both horizontal and vertical shifts in the frequency domain, which may lead to erroneous diagnostic results of real structures. A new damage detection strategy has been proposed based on the correlation coefficient (CC) between the reference impedance data and a concurrent impedance data with an effective frequency shift which is defined as the shift causing the maximum correlation. The proposed technique was applied to a lab-sized steel truss bridge member under the temperature varying environment. From an experimental study, it has been demonstrated that a narrow cut inflicted artificially to the steel structure was successfully detected using the proposed SHM strategy.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권2호
• /
• pp.43-47
• /
• 2003

Lead zirconate titanate (PZT) thin films were fabricated by the pulsed laser ablation deposition (PLAD) method onto Pt/Ti/SiO$_2$/Si substrates. Crystalline phases as well as preferred orientations in PZT films were investigated by X-ray diffraction analysis (XRD). The well-crystallized perovskite phase and the (101) preferred orientation were obtained by two-step annealing at the conditions of $650^{\circ}C$, 1 hour. It was found that the temperature for the pulsed laser ablated PZT films annealed via a two-step annealing process can be reduced 20$0^{\circ}C$ compared to that of the conventional three-step annealing temperature profile for enhancing the transformation of the perovskite phase. The remanent polarization and the coercive field of this film were about 20 $\mu$C/$\textrm{cm}^2$ and 46 kV/cm, while the dielectric constant and loss values measured at 1 KHz were approximately 860 and 0.04, respectively. The interesting phenomena of this film, such as vertical shift in hysteresis curve, are also discussed.

• 한국정밀공학회지
• /
• 제20권3호
• /
• pp.35-41
• /
• 2003

The multihole blanking of thin sheet metal using progressive die set is an important process on production of precision electronic machine parts such as IC leadframe. In this paper, in order to investigate the influence of blanking order on the final lead profile and deformed configuration, simulation technique for progressive blanking process is proposed and analyzed by LS-DYNA. The results of FE-simulations are in good agreement with the experimental results. Consequently, from the results of FE-analysis based on the procedure proposed in this paper, it is possible to predict the deformation of lead and to manufacture high precision leadframes in progressive blanking process and these results might be used as a guideline to develop layout design system in multihole blanking process.

• 대한의용생체공학회:의공학회지
• /
• 제11권1호
• /
• pp.13-18
• /
• 1990

Frequency responses of ambulatory electrocardiogram systems were measured. Phase shift was assessed by our improved Wagner's method. The characteristics of the systems were found much worse than that of ordinary ECG equipment both in gain and phase responses. The decay of -3dB in amplitude observed in 0.2Hz and the lead of 45 dog in phase was observed in 0.6Hz. In order to investigate which of these 2 responses play major role in generating false S -T deviation, mathe- matical filters were Composed in a computer and actual ECGs were fed. The false S-T deviation were found to be caused mostly by enormous lead in phase, and then, the compensation circuit to diminish the lead in phase was inserted in the commercial systemes. The compensated systems showed no false deviation in S-T segment.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.4788-4795
• /
• 2011

본 연구는 전통적인 방식으로부터 U-Learning으로 학습 패러다임을 전환하는 효과 및 가능성을 검토하고 제안하기 위한 것이며, E-Learning으로부터 M-Learning 및 U-Learning으로의 교수법 플랫폼 전환을 고려하기 위한 것이다. 개인별 학습 프로세스에 학습 환경이 어떤 영향을 미치는가에 대한 적절한 연구없이는 양질의 교육을 제공하기 어려울 것이다. 현대는 언제 어디서나 교육을 받을 수 있는 새로운 학습 환경 시대를 맞이하고 있으며, 누구나 평생교육을 받을 수 있게 되었다. 이러한 경향의 장점을 최대화하고, 양질의 교육을 진행하기 위한 제한 사항들을 확인하여야 하는데, 이들 요소들은 U-Learning 및 이를 가능하게 하는 기술과 함께 논의되어야 한다. 보급교육 혹은 평생교육은 많은 연구기관의 관심을 받고 있는바, 본 논문에서는 학습 모드 및 학습 양상의 유형에 대한 논의도 포함하였다.

• 지능정보연구
• /
• 제21권2호
• /
• pp.151-171
• /
• 2015

본 연구는 최근 가장 큰 이슈로 떠오르는 "사물인터넷(IoT: Internet of Things)"의 개념과 국내 외 IoT 시장에 대한 현황을 고찰하였으며, IoT 시대의 도래로 인해 유발되는 패러다임 전환 발생에 따른 기업측면의 적절한 대응방안에 대한 해결책을 도출하였다. 따라서 본 연구는 티핑포인트(Tipping point)에 있는 IoT 경쟁 시대에 적절하게 대응하기 위한 기업의 경영전략을 '패러다임 전환(paradigm shift)'이라는 시각을 통해 대응 방안을 제시하였다. 특히, 과거의 경영 패러다임과 IoT 시대의 경영 패러다임을 비교 분석하여 i)지식 및 학습 주도 경영, ii)기술 및 혁신 중심 경영, iii)수요 창출 경영, iv)글로벌 협업 경영으로 새롭게 패러다임 전환(Paradigm Shift)이 발생할 것으로 예측 및 제안하였고, 이러한 패러다임의 전환에 대응하기 위한 기업측면의 경영전략 프로세스 모델을 구축하기 위해 Gartner가 제시한 'RTE Cyclone model'을 활용하였다. '실시간 기업(RTE)' 이라는 개념은 급변하는 IoT 시대에 기업측면의 경영 전략 프로세스로 활용가치가 있다고 판단되며, 본 연구에서 적절히 응용하여 'IoT-RTE Cyclone model'을 제안하였다. 특히, 제안한 모델은 기업의 민첩성을 강조하고 IT 및 IoT 기술을 통한 실시간 모니터링, 분석, 실행을 기본으로 하며, 기업의 경영 프로세스 각 부문을 통합시켜 기업의 전반적인 서비스를 지원하기 때문에 빠르게 변화하는 IoT 시대에서 영위하는 기업측면에서의 효과적인 대응전략으로 활용할 수 있다.