• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.93-99
• /
• 1996

In order to investigate the extent of fixation of new water-borne preservatives in blocks of pinus densiflora sapwoods the streaming potential through the column with preservative treated wood was measured at various conditions. The rates of leachability of ingredients in the treated wood were estimated by the measurement of electric conductivity of the solution with the leached components. The solution was also analyzed by Atomic absorption spectrophotometer (AA). As a results, the experimental data indicated that the fixation of CCB, CCFZ and ACQ in wood were relatively unstable. The fixation rates of CCB, CCFZ were improved by increasing heat and drying time. The amounts of the leached ingredients were apparently higher in CCB and CCFZ than in CCA, while the rate of leaching of ACQ was not changed at various drying temperature.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.295-298
• /
• 2004

It was revealed that leaching of elements were partly inhibited because seawater contains plenty of dissolved ions than fresh water. On the other hands, the low activity coefficient and the formation of complex with chloride and sulfate play roles in enhancing element leachability. However, the pH buffaring capacity of seawater is the most important factor that makes the leaching of elements and its chemical behavior in the seawater system different from those in the fresh water environments. In general, the leaching from the weathered ash was smaller than that from the fresh ash. However, it was revealed that the leaching of Si, Fe, Al, Mn, phosphate, and some other elements were independent of ash weathering. They were dependant only on the pH of the solutions.

• 환경위생공학
• /
• 제16권1호
• /
• pp.53-60
• /
• 2001

In this study, the heavy metals in tannery sludge were solidified by using cement and power plant fly ash. Solidification characteristics were discussed with the compressive strength and chromium leaching characteristics of solids. The compressive strength of cement mortar was increased by the amount of fly ash up to 24.3~33.8%, which was considered the results of pozzolanic reaction. When the content of fly ash was 20%, cement mortar showed the highest value $295kg/\textrm{cm}^2$ for 28 days curing. At early curing days, solidified chromium tannery sludge solids were showed lower compressive strength because of the retard on the hydration of cement, but the compressive strength was recovered to be more than $140kg/\textrm{cm}^2$ for 28 days curing regardless with the amounts of fly ash. Also, the results of leaching tests by KSM and TCLP method were showed that the solidified chromium sludge have leached out 0.3~2.2% and 11~17%, respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.739-742
• /
• 2002

Immobilization of contaminants in contaminated soils by solidification processes is an attractive potential remediation process. In this study, the treatability of lead, copper, toluene, and COD was investigated by leaching test. Industrial sand was adopted as the test material and was contaminated with lead copper, and toluene to 100mg/kg, 500mg/kg, 200mg/kg respectively. P solidifying agent was used as the binder(20% by weight of contaminated soil) in the solidification treatment. The leachability of contaminants leached from the solidified soil was evaluated using column test. The percentage of contaminants leached from the solidified soil was significantly reduced by reaction of waste species with cement components and encapsulation reaction of binder. Based on the tests, it is ascertained solidification process can be a very effective method to control the elution of contaminants from the contaminated soil.

• 한국물환경학회지
• /
• 제27권6호
• /
• pp.862-867
• /
• 2011

Pozzolanic-based stabilization/solidification (S/S) is an effective and economic remediation technology to immobilize heavy metals in contaminated soils. In this study, quick lime (CaO) was used to immobilize cadmium and zinc present in waste mine contaminated clayey sand soils. Addition of 5% quicklime to the contaminated soils effectively reduced heavy metal leachability after 2 bed volume operation below the drinking water regulatory limits. Lime addition was revealed to increase the immobilization for all heavy metals in tested pH ranges, so it could be an optimal choice for short-term remediation of heavy metal contaminated soil. The mass balances for these column tests show metal reduction of 92% for Cd and 87% for Zn of total resolved mass in case of 5% lime application.

• 농약과학회지
• /
• 제6권4호
• /
• pp.309-319
• /
• 2002

주요 농약 5종의 토양에 대한 흡착계수를 구하여 이동성을 구분하고, 흡착계수와 토양 반감기를 이용하여 토양 중에서의 농약의 용탈 잠재성을 평가하고자 하였다. 국내에서 사용하고 있는 비이온성 농약인 토양살충제 ethoprophos, 원예용 살균제 procymidone, 도열병약 iprobenfos와 isoprothiolane 및 수도용 제초제 butachlor를 대상농약으로 선정하였고 토지이용 형태에 따라 논, 밭 및 산림토양으로 구분, 3종의 토양을 대상으로 흡착실험을 수행하였다. 각 토양에 대한 Freundlich 흡착계수(K)는 ethoprophos $0.35{\sim}0.95$, iprobenfos $0.98{\sim}2.2$, procymidone $1.2{\sim}4.3$, isoprothiolane $1.5{\sim}3.5$, butachlor $7.9{\sim}19$ 범위이었고, Koc에 의한 이동성 분류체계에 의하면 ethoprophos는 mobile, iprobenfos, isoprothiolane 및 procymidone은 moderately mobile, 그리고 butachlor는 slightly mobile 등급에 속하였다. 또한 유기물에 대한 흡착계수(Koc)와 토양 중에서의 반감기를 기준으로 지수화한 Groundwater Ubiquity Score (GUS) index 방법과 Koc와 분해상수 및 토양환경조건의 영향을 고려하는 흡착/분해 표준지수 방법을 이용하여 용탈잠재성을 평가하였다. 두 평가방법에 의하여 isoprothiolane과 iprobenfos은 중간 정도의 용탈 가능성이 있고 ethoprophos가 약간의 용탈 가능성이 있는 것으로 나타났으며 butachlor와 procymidone은 용탈 가능성이 매우 낮은 것으로 평가되었다. 상대적으로 유기물 함량이 높은 양토에서는 유기물 함량이 낮은 식양초에 비하여 농약의 용탈잠재성이 낮은 것으로 나타나 노약의 흡착에 직접적인 영향을 미치는 토양 유기물이 용탈 잠재성을 결정짓는 중요한 요인으로 작용하였다.

• 대한환경공학회지
• /
• 제32권2호
• /
• pp.185-192
• /
• 2010

본 연구에서는 방해석을 주성분으로 하는 폐굴껍질을 고온에서 소성하여 생석회로 가공한 후 고농도의 납(전함량 29,000 mg/kg)으로 오염된 군부대내 사격장 토양에 처리하여 안정화 효율을 평가하였다. 소성 효과를 평가하고자 소성 전 폐굴껍질(NOS)과 소성 후 폐굴껍질(COS)을 각각 납 오염토양에 처리하였으며 28일간 습윤 양생한 후 0.1N HCl 추출에 의한 가용성 납 농도 변화를 관찰하였다. 실험결과 전 기간 동안 방해석을 주성분으로 하는 NOS에 비해 생석회가 주성분인 COS의 안정화 효율이 높게 나타났다. 또한 완전 습윤 상태 이상의 수분투여는 안정화 효율에 큰 영향을 미치지 않았으며, -#10 mesh에 비해 -#20 mesh의 입경에서 높은 안정화 효율을 나타내었다. NOS에 의한 안정화 처리 결과는 모든 처리에서 토양환경보전법상 '가'지역의 우려1기준 100 mg/kg (환경부 2009년 기준)을 만족 시키지 못 하였으나 COS 15% 및 20% 첨가 시 무처리구의 8,106 mg/kg에 비해 각각 47 mg/kg(28 days) 및 3 mg/kg(28 days)로 현격하게 저감되어 우려기준 100 mg/kg을 만족시켰다. 소성 굴껍질의 안정화 기작을 조사하고자 주사전자현미경(SEM)을 이용하여 elemental dot maps을 수행한 결과 Pb의 안정화는 Al 및 Si와 높은 상관관계가 있음을 확인할 수 있었다.

• 자원리싸이클링
• /
• 제29권5호
• /
• pp.48-54
• /
• 2020

소다배소 처리한 탈질폐촉매의 수침출 잔사로부터 TiO₂ 회수를 위하여 황산침출과 가수분해 반응을 실시하였다. Ti 성분의 황산침출은 70 ℃, 3 시간, 교반속도 500 rpm, 슬러리 농도 100 g/L로 고정하여 실시하였고, 황산농도는 4~8 M로 변화시키며 진행하였다. 침출액으로부터 Ti 성분의 침전회수는 가수분해반응을 이용하였으며, 실험조건은 100 ℃, 반응시간 2 시간으로 고정하였고, Ti 성분의 침전율은 침출액과 증류수의 혼합비와 침전반응 Seed 혼입유무에 따라 비교하였다. Ti의 침출율은 6 M에서 최대 95.2 %까지 도달 후 점차 감소하는 경향을 나타내었고, Si의 침출율은 황산농도 증가에 반비례하여 급격히 감소하여 91.7 %에서 8 M 조건에서는 3.0 %까지 억제되었다. 침출액을 이용한 가수분해는 부성분인 Si의 함량이 가장 낮은 8 M 침출액을 이용하여 진행하였다. 침출액의 혼합비에 의한 Ti의 침전회수율은 반응시간에 비례하였고 혼합비에 반비례하였다. 또한, 침전반응의 가속화를 위해 TiO₂(#325~#400 mesh, 0.2 g) seed를 첨가하였을 경우에 모든 혼합조건에서 침전회수율이 상승하였으며, 혼합비(침출액:증류수) 1:9~3:7 구간에서 98.8~99.8 %의 침전율이 달성되었다. 회수된 TiO₂의 순도는 침출액 혼합비 1:9~3:7 구간에서 혼합비가 낮을수록 증가하여 최대 99.46 %까지 상승함을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.3009-3016
• /
• 2012

This study evaluated the use of iron-impregnated SBA-15 (Fe/SBA-15) as a catalyst for the oxidative degradation of persistent phenol analogues, such as 2-chlorophenol (2-CP), 4-chlorophenol (4-CP), 2-nitrophenol (2-NP), 4-nitrophenol (4-NP) and 2,4,6-trichlorophenol (2,4,6-TCP) in water. The oxidation reactions were carried out with reaction time, concentration of the phenols, amount of the catalysts, reaction temperature, pH of the reaction mixture as the process variables with or without using hydrogen peroxide as the oxidizing agent. The conversion achieved with Fe/SBA-15 at 353 K for 2-CP, 4-CP, 2-NP, 4-NP, 2,4,6-TCP was 80.2, 71.2, 53.1, 62.8, 77.3% in 5h with a reactant to $H_2O_2$ mole ratio of 1:1, and 85.7, 65.8, 61.9, 63.7, 78.1% in the absence of $H_2O_2$, respectively. The reactions followed pseudo first order kinetics. The leachability study indicated that the catalyst released very little iron into water and therefore, the possibility of secondary pollution is negligible.

• 산업기술연구
• /
• 제20권A호
• /
• pp.57-62
• /
• 2000

This experiment was done to investigate the leaching and adsorption properties of heavy metals on porphyry. The comparison with respect to the leachability of heavy metals from porphyry between the Korea Standard Leaching Test (KSLT) and the Toxicity Characteristic Leaching Procedure (TCLP) was carried out. The fractional composition of leachate and the total concentration of heavy metal of porphyry were studied through Sequential Extraction Procedure (SEP) and EPA Method 3050. Adsorption experiment of porphyry has pointed out that the optimum dosage of porphyry for 50ppm Pb was over 10g/L, the effective particle size for absorption was below 200 mesh and the optimum pH was about 7. From the Freundlich' adsorption equation, 1/n was 1.0722, and k was 0.0041. After adsorption, the fractional composition of Pb was changed. The exchangeable, carbonate, reducible fractions were increased, and the organic fraction was not changed, and the residual fraction was decreased.