• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.168-172
• /
• 2010

Superhydrophilic thin film consisted of positively charged poly (allylamine hydrochloride) (PAH) and negatively charged poly (acrylic acid) (PAA) was fabricated by a layer-by-layer (LBL) self-assembly. Glutaraldehyde (GA) was used in order to increase an adhesion hardness by amine-aldehyde reaction. The surface morphology, thickness, transmittance, water contact angle and adhesion hardness of PAH/PAA thin film with or without GA were measured. The adhesion hardness of PAH/PAA thin film with GA deposition increased over 2 times although the film thickness of PAH/GA/PAA decreased than that of PAH/PAA thin film. The increase of adhesion hardness by amine-aldehyde reaction between PAH and GA was measured by fourier transform infrared (FT-IR) spectroscopy. Fabricated PAH/PAA and PAH/GA/PAA thin films showed water contact angel under $5^{\circ}$ and high transmittance over 91.3% at 550 nm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.4
• /
• pp.199-203
• /
• 2017

$ZrO_2/PSS$ thin film with a high refractive index was fabricated on a glass substrate by a layer-by-layer self-assembly method. The surface morphology and thickness of the fabricated $ZrO_2/PSS$ thin films were measured as a function of the number of $(ZrO_2/PSS)n$. As the number of $(ZrO_2/PSS)n$ increased from n = 5 to n = 20, RMS roughness decreased from 29.01 nm to 8.368 nm. The $ZrO_2$ thin films exhibited high transmittance of 85% or more; and the 15-bilayer thin film exhibited the highest transmittance among the samples. The transmittance of the fabricated $(ZrO_2/PSS)_{15}$ thin film was ca. 90.8% in the visible range. The refractive index of the glass substrate coated by a $(ZrO_2/PSS)_{15}$ thin film with a thickness of 160 nm increased from ca. 1.52 to 1.74 at the 632 nm wavelength.

• Smart Structures and Systems
• /
• v.4 no.5
• /
• pp.531-548
• /
• 2008

Recently, dense sensor instrumentation for structural health monitoring has motivated the need for novel passive wireless sensors that do not require a portable power source, such as batteries. Using a layer-by-layer self-assembly process, nano-structured multifunctional carbon nanotube-based thin film sensors of controlled morphology are fabricated. Through judicious selection of polyelectrolytic constituents, specific sensing transduction mechanisms can be encoded within these homogenous thin films. In this study, the thin films are specifically designed to change electrical properties to strain and pH stimulus. Validation of wireless communications is performed using traditional magnetic coil antennas of various turns for passive RFID (radio frequency identification) applications. Preliminary experimental results shown in this study have identified characteristic frequency and bandwidth changes in tandem with varying strain and pH, respectively. Finally, ongoing research is presented on the use of gold nanocolloids and carbon nanotubes during layer-by-layer assembly to fabricate highly conductive coil antennas for wireless communications.

• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.215-224
• /
• 2017

Resveratrol was incorporated into various combinations of single- and double-layer nanoemulsions, prepared by self-assembly emulsification and complex coacervation with chitosan, alginate, and ${\beta}$-cyclodextrin, respectively. Resveratrol nanoemulsions were composed of medium-chain trigacylglycerols (MCTs), $Tween^{(R)}$ 80, water, chitosan, alginate, and ${\beta}$-cyclodextrin. The corresponding mixtures were formulated for the purpose of being used as a nutraceutical delivery system. Resveratrol nanoemulsions were obtained with particle sizes of 10-800 nm, with the size variation dependent on the emulsification parameters including the ratio of aqueous phase and surfactant ratio. Resveratrol nanoemulsions were characterized by evaluating particle size, zeta-potential value, stability, and release rate. There were no significant changes in particle size and zeta-potential value of resveratrol nanoemulsions during storage for 28 days at $25^{\circ}C$. The stability of resveratrol in the double-layer nanoemulsions complexed with chitosan or ${\beta}$-cyclodextrin was higher, compared with the single-layer nanoemulsions.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.5
• /
• pp.1043-1046
• /
• 2004

The stability and electrochemical properties of a self-assembled layer of spinach ferredoxin on a quartz substrate and on a highly oriented pyrolytic graphite electrode were investigated. To fabricate the ferredoxin self-assembly layer, dimyristoylphosphatidylcholine was first deposited onto a substrate for ferredoxin immobilization. Surface analysis of the ferredoxin layer was carried out by atomic force microscopy to verify the ferredoxin immobilization. To verify ferredoxin immobilization on the lipid layer and to confirm the maintenance of redox activity, absorption spectrum measurement was carried out. Finally, cyclic-voltammetry measurements were performed on the ferredoxin layers and the redox potentials were obtained. The redox potential of immobilized ferredoxin had a formal potential value of -540 mV. It is suggested that the redox-potential measurement of self-assembled ferredoxin molecules could be used to construct a biosensor and biodevice.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.411-412
• /
• 2007

See Full Text

• Composites Research
• /
• v.35 no.6
• /
• pp.371-377
• /
• 2022

Triboelectric nanogenerator (TENG) devices have generated a lot of interest in recent decades. TENG technology, which is one of the technologies for harvesting mechanical energy among the energy wasted in the environment, is obtained by the dual effect of electrostatic induction and triboelectric charging. Recently, a multilayer thin film stacking method (or layer-by-layer (LbL) self-assembly technique) is being considered as a method to improve the performance of TENG and apply it to new fields. This LbL assembly technology can not only improve the performance of TENG and successfully overcome the thickness problem in applications, but also present an inexpensive, environmentally friendly process and be used for large-scale and mass production. In this review, recent studies in the accomplishment of LbL-based materials for TENG devices are reviewed, and the potential for energy harvesting devices reviewed so far is checked. The advantages of the TENG device fabricated by applying the LbL technology are discussed, and finally, the direction and perspective of this fabrication technology for the implementation of various ultra-thin TENGs are briefly presented.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.1
• /
• pp.15-19
• /
• 2006

A ferredoxin adsorbed hetero self-assembled layer was fabricated on chemically modified Au substrate, 4-Aminothiophenol (4-ATP) was deposited onto Au substrate and then N-succinimidyl-3-[2-pyridyldithio] propionate (SPDP) was adsorbed on the 4-ATP layer, since SPDP was used as a bridging molecule for ferredoxin adsorption, Ferredoxin/SPDP/4-ATP structured hetero layer was constructed because of strong chemical binding of ferredoxin, SPDP, and 4-ATP, The surface of the ferredoxin-adsorbed SPDP/4-ATP layer was observed by scanning tunneling microscopy, The hetero film formation was verified by surface plasmon resonance measurement. The current flow and rectifying property based on the scanning tunneling spectroscopy I-V characteristics was achieved in the proposed hetero layer. Thus, the hetero layer structure of ferredoxin functioned as a molecular diode with rectifying property, The proposed molecular diode can be usefully applied for the development of molecular scale electronic devices.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.392-398
• /
• 2005

Self-assembled multilayer thin films of poly(ethylene-alt-maleic anhydride) (PEMAh) and poly(4-vinyl pyridine) (P4VP) were fabricated by layer-by-layer (LbL) sequential adsorption. Fourier transform infrared (FT-IR) spectroscopic analysis of the self-assembled PEMAh/P4VP multilayer films confirms that the driving forces for the multilayer buildup are the intermolecular hydrogen bonding and electrostatic interactions. The linear increase of absorption peak of P4VP at 256 nm with increasing number of PEMAh/P4VP bilayers indicates that the multilayer buildup is an uniform assembling process. We also investigate the effects of polyelectrolyte concenhation variation of the dipping solution and pH variation of the PEMAh solution on the multilayer film formation. Thickness. adsorbed polyelectrolyte mass and surface roughness of the multilayer films were measured by UV-visible spectroscopy, quartz crystal microbalance (QCM), and atomic force microscopy (AFM), respectively.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.842-846
• /
• 2008

Layer-by-layer assembled multilayers of poly(ethersulfone)s were deposited on the surface of Nafion membrane for the application of direct methanol fuel cells (DMFC). Aminated poly(ethersulfone) (APES) and sulfonated poly(ethersulfone) (SPES) were used as a polycation and a polyanion for fabrication of the multilayer films. UV/Vis absorption spectroscopy verified a linear build-up of the multilayers of APES and SPES on the surface of Nafion. Thin multilayer films deposited on the Nafion membrane enabled methanol permeability of the membrane to decrease by 78% in comparison with the pristine Nafion. The performance of DMFCs in concentrated methanol was highly enhanced by using the multilayer modified Nafion.