• 전기학회논문지
• /
• 제60권2호
• /
• pp.431-434
• /
• 2011

In this paper, bandwidth enhanced design of dielectric resonator antenna fabricated in multi-layer substrate is introduced. The proposed dielectric resonator antenna is operating with fundamental TE101 mode and higher-order TM111 mode. Each resonance frequency is dependent on resonator dimensions. As increasing the height of radiating aperture, the higher-order TM111 mode resonance frequency approach the fundamental TE101 mode resonance frequency and the antenna bandwidth increase by double resonance. Three different aperture height size antennas that operated at 7GHz are fabricated in FR4 multi-layer substrate. Measured 10 dB matching bandwidth is 8 percent for single resonace antenna and 18 percent for double resonance antenna.

• 한국기후변화학회지
• /
• 제6권4호
• /
• pp.379-388
• /
• 2015

The purpose of the this study was to provide basic data on reasonable management for Abies koreana in Mt. Jiri through analysis the ecological characteristics of Abies koreana forests on Seseok. Due to low soil pH (4.26), high organic matter (10.5%) and total N (0.32%), the soil properties of A. koreana forest on Seseok are different from those of other forest soil in Korea. According to the result of importance value analysis, A. koreana (70.5) for tree layer, A. koreana (37.6) and Rhododendron schlippenbachii (20.8) for subtree layer and A. koreana (12.6), Sasa borealis (11.5) and Acer pseudosieboldianum (11.2) for shrub layer were high, respectively. The species diversity of Shannon was 0.425 for tree layer, 0.869 for subtree layer and 1.320 for shrub layer. Evenness and dominance for all layers ranged from 0.365 to 0.894 and 0.187 to 0.635, respectively. Height growth according to DBH of A. koreana on Seseok was relative high. Annual mean tree ring growth of A. koreana showed up 1.372, 1.557 and 1.483 mm/yr for small, middle and large diameter tree, respectively. Considering the importance value, distribution of seedling, height growth and ring growth, A. koreana forest on Seseok in Mt. Jiri will be maintained as the major population from now on.

• Journal of Welding and Joining
• /
• 제17권5호
• /
• pp.40-46
• /
• 1999

The sensors employed in the robotic are welding system must detect the changes in weld characteristics and produce the output that is in some way related to the change being detected. Such adaptive systems, which synchronise the robot arm and eyes using a primitive brain will form the basis for the development of robotic GMA(Gas Metal Arc) welding which increasingly higher levels of artificial intelligence. The objective of this paper is to realize the mapping characteristics of bead height through learning. After learning, the neural estimation can estimate the bead height desired from the learning mapping characteristic. The design parameters of the neural network estimator(the number of hidden layers and the number of nodes in a layer) are chosen from an estimation error analysis. A series of bead of bead-on-plate GMA welding experiments was carried out in order to verify the performance of the neural network estimator. The experimental results show that the proposed neural network estimator can predict the bead height with reasonable accuracy and guarantee the uniform weld quality.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.17-22
• /
• 2007

Recent new packages such as MCP(Multi-Chip Package), QDP(Quadratic Die Package) and DDP(Dual Die Package) have stack type configuration. This kind of multi-layer package is thicker than single layer package. So there is need for the low height looping technology in wirebonder to make these packages thinner. There is stiff zone above ball in wirebonder wire which is called HAZ(Heat Affect Zone). When making low height loop (below $80\;{\mu}m$) with traditional forward loop, stiff wire in HAZ(Heat Affected Zone) above ball is bended and weakened. So the traditional forward looping method cannot be applied to low height loop. SSB(stand-off stitch) wire bonding method was applied to many packages which require very low loops. The drawback of SSB method is making frequent errors at making ball, neck damage above ball on lead and the weakness of ball bonding on lead. The alternative looping method is BNL(ball neckless) looping technology which is already applied to some package(DDP, QDP). The advantage of this method is faster in bonding process and making little errors in wire bonding compared with SSB method. This paper presents the result of BNL looping technology applied in assembly house and several issues related to low loop height consistence and BNL zone weakness.

• Imaging Science in Dentistry
• /
• 제33권1호
• /
• pp.43-49
• /
• 2003

Purpose : To evaluate the differences in bone height, bone width, and visibility of posterior spiral tomographic images according to various exposure directions, image layer thickness, and inclination of the mandibular inferior border. Materials and Methods: Six partially and completely edentulous dry mandibles were radiographed using Scanora spiral tomography. Spiral tomography was performed at different exposure directions (dentotangential and maxillotangential projection), image layer thicknesses (2 mm, 4 mm and 8 mm), and at various inclinations to the mandibular border (+ 100, 00 and -10°). The bone height and width was measured using selected tomographic images. The visibility of mandibular canal, crestal bone, and buccal and lingual surfaces were graded as 0, 1, or 2. Results : The bone width at the maxillo-tangential projection was wider than at the dento-tangential projection (p < 0.05). The visibility of buccal and lingual surface at the maxillo-tangential projection was higher than at the dento-tangential projection (p<0.05). Thinner image layer thicknesses resulted in greater visibility of buccal and lingual surfaces (p < 0.05). Bone height was greatest in the -10° group, and at the same time the bone width of the same group was the narrowest (p < 0.05). The visibility of alveolar crest and buccal surface of the + 10° group was the highest, while the visibility of the mandibular canal was greatest in the 00 group. Conclusion: When spiral tomography is performed at the mandibular posterior portion for visualization prior to implant surgery, it is important that the inferior border of mandible be positioned as parallel as possible to the floor. A greater improvement of visibility can be achieved by maintaining a thin image layer thickness when performing spiral tomography.

• 한국지반공학회논문집
• /
• 제32권6호
• /
• pp.5-16
• /
• 2016

성토지지말뚝공법에서 연약지반 강성, 성토체의 내부마찰각, 토목섬유의 인장강성, 성토고의 변화가 한계높이로 표현되는 하중 전이 흙 아치의 형태에 어떠한 영향을 미치는지 수치해석적으로 분석하였다. 매개변수 해석결과에서 연약지반 강성이 한계높이에 가장 큰 영향을 미쳤다. 주 영향요소인 연약지반 강성과 다른 매개변수의 조합에 대해 한계높이가 어떻게 변화하는지 등고선도 형태의 도표를 제시하고 분석하였다. 해석 결과는 연약지반 강성과 성토고의 조합에 대해 한계높이가 매우 민감하게 변함을 보였다. 연약지반 강성이 충분히 낮은 조건에서 성토체의 내부마찰각에 대해 한계높이가 민감하게 변하였다. 토목섬유가 포설된 조건에서는 토목섬유 인장강성의 변화가 한계높이 변화에 큰 영향을 주지 않았다.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.703-709
• /
• 2002

In order to investigate the smoke movement in three dimensional room fires, the center fire, wall fire and corner fire plume in different sized fires were studied experimentally by rectangular pool fire using methanol as a fuel. As the fire size became larger for the center fires placed at the center of the floor, the air flow rate entrained through the opening, average hot layer temperature, flame angle deflected backwards and mean flame height was observed to increase. On the other hand, as the fire size became smaller, the neutral plane height in the door and time reached steady-state was observed to decrease. The average hot layer temperature, mean flame height and doorway neutral plane height obtained from comer fire were higher than those produced by wall fires and center fires. The simple model for describing the effect of walls on the mean flame height was presented. It was shown that the model provides a good description of the present measurements, when used with the assumption by Hansell(1993), that the increase of the average flame height is equal to the ratio of the open to the total perimeters of the trays. Also the two models for predicting the effects of walls on the mean flame height were presented. These models overestimated the measured values of the mean flame height above fuel trays close to a wall and in a corner by approximately 19-26%, respectively.

• 한국발생생물학회지:발생과생식
• /
• 제10권2호
• /
• pp.93-96
• /
• 2006

전어, Konosirus punctatus의 부화후부터 부화후 30일까지의 전장, 두장, 두고, 안경, 망막 두께 및 렌즈직경의 성장은 비례직선적이었다. 전장에 대한 두장 및 두고의 상대 성장, 두장에 대한 안경 및 렌즈직경의 상대 성장, 두고에 대한 안경 및 렌즈직경의 상대 성장, 그리고 망막 두께에 대한 안경, 렌즈직경, 두장, 두고의 상대 성장은 높은 상관계수를 보이는 상대성 장식을 보였다. 눈은 부화 후 9일에 완전히 형성되었으며 렌즈, 신경섬유층, 신경세포층, 내망상층, 내과립층, 외망상층, 외과립층, 외한계막, 간체와 추제층 및 상피층으로 구성되었다. 본 연구와 더불어 차후, 전어의 빛 민감성과 공간적 변화에 따른 망막 관련 연구가 필요하리라 사료된다.

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.285-295
• /
• 1996

In genneral, Businger expression is used for determining a turbulance diffusion coefficient. In this study, it is applied to the surface elements of cities such as Asphalt, Cround, Grass, Pond. We set up 5 m-height bar and measured the ary temperature and wet temperature at 도 height of 0.13, 0.27, 0.5, 1, 0, 3.0, 5.0m. In addition we measured the wind gradient and wind velocity at the height 3 m solar radiation continuously for 48 hours on the surface. Compared the measured data to Businger expression the result showed that Businger expression can be well applied to the complex surface of the city.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.78-84
• /
• 2016

In this paper, turbulence models for considering roughness in the open source code(OpenFOAM) was investigated. Wall function in the RANS(Reynolds-averaged Navier - Stokes) turbulence model was modified considering roughness on the flat plate by using roughness function. Correlation between the first layer height in the CFD model and roughness height of the plate was observed, and the most proper roughness function, and the first layer height from the plate wall in the CFD analysis was suggested in this paper.