• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.824-828
• /
• 2011

Transmission line analysis of the surface a cumulation layer in injection-enhanced gate transistor (IEGT) is presented for the first time, based on per-unit-length resistance and conductance of the surface layer beneath the gate of IEGT. Lateral electric field on the accumulation layer surface, as well as the electron current injected into the accumulation layer, is governed by the well-known wave equation, and decreases as an exponential function of the lateral distance from the cathode. Unit-length resistance and conductance of the layer are expressed in terms of the device parameters and the applied gate voltage. Results obtained from the experiments are consistent with the numerical simulations.

• 한국토양비료학회지
• /
• 제48권2호
• /
• pp.105-118
• /
• 2015

This study was carried out to investigate the effects of profile disturbance with different artificial accumulation history on physico-chemical properties of soil under plastic film house. The investigations included soil profile description using soil column cylinder auger F10cm x h110cm, in situ and laboratory measurements of soil properties at five sites each at the cucumber (Site Ic ~ Vc) and grape (Site Ig ~ Vg) plastic film houses with artificial soil accumulation. The sites except sites Ic, IVc, IVg and Vg, belong to ex-paddy area. The types of accumulates around root zone included sandy loam soil for 3 sites, loam soil for 1 site, saprolite for 2 sites, and multi-layer with different accumulates for 3 sites. Especially, Site IIg has mixed plow zone (Ap horizon) with original soil and saprolite, whereas disturbed soil layers of the other sites are composed of only external accumulates. The soil depth disturbed by artificial accumulation ranged from 20 cm, for Site IIg, to whole measured depth of 110 cm, for Site IVc, Vc, and Site IVg. Elapsed time from artificially accumulation to investigation time ranged from 3 months, Site IIc, to more than 20 years, Site Vg, paddy-soil covering over well-drained upland soil during land leveling in 1980s. Disturbed top layer in all sites except Site Vg had no structure, indicating low structural stability. In situ infiltration rate had no correlation with texture or organic matter content, but highest value with highest variability in Site IIIc, the shortest elapsed time since sandy loam soil accumulation. Relatively low infiltration rate was observed in sites accumulated by saprolite with coarse texture, presumably because its low structural stability in the way of weathering process could result in relatively high compaction in agro-machine work or irrigation. In all cucumber sites, there were water-transport limited zone with very low permeable or impermeability within 50 cm under soil surface, but Site IIg, IIIg, and Vg, with relatively weak disturbance or structured soil, were the reverse. We observed the big change in texture and re-increase of organic matter content, available phosphate, and exchangeable cations between disturbed layer and original soil layer. This study, therefore, suggest that the accumulation of coarse material such as saprolite for cultivating cash crop under plastic film house might not improve soil drainage and structural stability, inversely showing weaker disturbance of original soil profile with higher drainage.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.101-105
• /
• 2005

Electroluminescence(EL) and current-voltage(I-V) characteristics of hybrid EL devices containing Pr and Mn co-doped ZnS nanoparticles were investigated in this study. For the insertion of a hole transport layer of poly (N-vinyl carbazole)(PVK), the current level became lower due to the accumulation of electrons at the interface between PVK and nanoparticles. When both PVK and buffer layer $BaF_2$ were simultaneously introduced, the enhanced EL efficiency and improved I-V characteristics were obtained. This results from the additional increase of hole injection owing to the internal field induced by the significant accumulation of electrons at the interface. The presence of buffer layer $BaF_2$ together with PVK makes it possible the charge accumulation enough to induce the sufficient internal field for further hole injection.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.73-77
• /
• 2021

Inorganic-organic hybrid perovskite solar cells have demonstrated considerable improvements, reaching 25.5% of certified power conversion efficiency in 2020 from 3.8% in 2009. In normal structured perovskite solar cells, TiO2 electron-transporting materials require heat treatment process at a high temperature over 450℃ to induce crystallinity. Inverted perovskite solar cells have also been studied to exclude the additional thermal process by using [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as a non-oxide electron-transporting layer. However, the drawback of the PCBM layer is a charge accumulation at the interface between PCBM and a metal electrode. The impact of bathocuproin (BCP) buffer layer on photovoltaic performance has been investigated herein to solve the problem of PCBM. 2-mM BCP-modified perovskite solar cells were observed to exhibit a maximum efficiency of 12.03% compared with BCP-free counterparts (5.82%) due to the suppression of the charge accumulation at the PCBM-Au interface and the resulting reduction of the charge recombination between perovskite and the PCBM layer.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.251-256
• /
• 2006

To design the effective usage of electric double layer capacitors (EDLCs) used for a storage device of dye sensitized solar cell (DSC) energy, we first investigated the accumulation state of electrical charges and the charge behavior in the EDLCs. Based on the results, the voltage characteristics of EDLCs connected to DSC energy were evaluated. The results showed that the charge accumulation region concentrated on the central part of the carbonaceous electrode in EDLCs and the required times for charging and discharging were almost the same.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.673-676
• /
• 2005

To design the effective usage of electric double layer capacitors (EDLCs) used for a storage device of dye sensitized solar cell(DSC) energy, we first investigated the accumulation state of electrical charges and the charge behavior in the EDLCs. Based on the results. the voltage characteristics of EDLCs connected to DSC energy were evaluated. The results showed that the charge accumulation region concentrated on central part of the carbonaceous electrode in EDLCs and the required times for charging and discharging were almost the same.

• 한국조경학회지
• /
• 제27권3호
• /
• pp.50-57
• /
• 1999

This study aim to clarify the way of spatial composition of Tongdo Temple by diachronic analysis. The way of spatial composition was clarified through the analysis of built in architectural system in three periods. The result are as follows; 1. Spatial composition of Tongdo temple was changed in three period that it were establishment period, 1300s, and 1700s by the transition of meaning structure occurring the transition of spatial composition. 2. It was found out that the wat of spatial composition was three through the diachronic analysis the transition of spatial composition in Tongdo temple. 3. Juxtaposition as a way of spatial composition found out through the diachronic analysis is equivalent articulation of three sections; an upper, a middle, and a lower section and polyaxis or polycore in the each sections. Fusion is heterogenetic minglement mingling different kind of buildings and conjugation conjugating different kind of decorations. And accumulation of layer is mutilayer laying different time of layer and multi aspect aligning different kind of aspects since the temple's establishment.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.151-157
• /
• 1996

We propose a mechanism for the formation of pinholes in the Si-buffer layer, through the observations with varying the process- and structure variables in the SEPOX (selective poly-oxidation) process, an isolation method for sub-u DRAMs. Pinholes are formed through the accumulation of Si vacancies generated by the oxidation of Si, in which Si atoms leave the sites (vacancies) at the Si/SiO$_{2}$ interfaces and diffuse into the oxide to be oxidized near interface. In the course of the accumulation of Si-vacancies, the stress induced in the Si-buffer layer affects the migration of vacancies to result in the final size and distribution of pinholes. This paper may be, to our knowledge, the first report about the oxidation-induced pinhole in the Si/SiO$_{2}$ system.

• 대한전자공학회논문지
• /
• 제27권11호
• /
• pp.49-54
• /
• 1990

본 논문에서는 LDD(lightly doped drain)구조를 갖는 짧은 채널 MOSFET에서의 기생저항의 게이트 전압 의존도에 대한 모형을 제시하였다. 게이트 전극 밑에 위치한 LDD 영역에서는 게이트 전압에 의해 준 이차원적인 축적층(quasi two-dimensional accumulation layer)이 형성된다. 소오스 측 LDD 기생저항을 축적층의 저항과 벌크 LDD 저항의 병렬 연결로 취급하였으며 별크 LDD 저항은 채널의 반전층 끝으로부터 ${n^+}$영역의 경계까지 퍼짐 저항으로 근사하였다. 그리고 접합에서의 도우핑 농도 구배가 LDD 저항에 미치는 영향이 토의하였다. 본 모형의 결과로 선형 영역에서는 LDD 저항이 게이트 전압의 증가에 따라 감소하고, 포화영역에서는 채널과 LDD에서 속도포화를 고려한 결과, 게이트 전압에 대해 준 일차적으로 증가하는 것으나 나타나 발표된 실험결과들과 일치하였다.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.52-62
• /
• 2013

In order to obtain the relation between the cutting force and the process parameters in the chamfering process for the gear of a gear shaft, analysis of the process was performed with a simplified model instead of considering the whole actual 3-dimensional cutting situation produced between cutting tool and gear. The model divided the actual situation into the accumulation of hundreds of 2-dimensional layers with a small thickness in the direction of the height of gear and derived cutting force at a cutting position by accumulating each cutting force calculated in a layer. With proposed method to analyze the cutting forces in the chamfering process, it was revealed that the cutting position and size were exactly searched to calculate the cutting force in each layer. The total cutting force was the highest in the corner where the cutter encountered the gear first during the relative motion between them. The cutting forces were changed in proportion to the cutting parameters such as feed rate and trajectory.