• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.101-107
• /
• 1998

This paper is studied micro-defect characteristics by phosphorus 1MeV ion implantation and Rs, SRP, SIMS, XTEM for the RTA process was measured and simulated. As the dose is higher, the Rs is lower. When the dose are $1{\times}10^{13}/cm^2,\;5{\times}10^{13}/cm^2,\;1{\times}10^{14}/cm^2$, the Rp are $1.15{\mu}m,\;1.15{\mu},\;1.10{\mu}m$ respectively. As the RTA time is longer, the maximum concentration position is deeper from the surface and the concentration is lower. Before the RTA was done, we didn't observe any defect. But after the RTA process was done, we could observe the RTA process changed the micro-defects into the secondary defects. The simulation using the buried layer and connecting layer structure was performed. As results, the connecting layer had more effect than the buried layer to latch-up immune. Trigger current was more $0.6mA/{\mu}m$ and trigger voltage was 6V at dose $1{\times}10^{14}/cm^2$ and the energy 500KeV of connecting layer Lower connecting layer dose, latch-up immune characteristics was better.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.441-444
• /
• 1998

This paper is concerned with researching latch-up immune CMOS structure was performed. By the simulation results, the connecting layer had more effect than the buried layer to latch-up immune. When the connecting layer was the dose 1*10$^{14}$ /cm$^{2}$ and the energy 500KeV, the trigger current was more 0.6mA/.mu.m and the trigger voltage was 6V. The more the connecting layer dose was lower, the more the latch-up immune characteristics was butter.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.2
• /
• pp.127-140
• /
• 2002

In a spatial database system, the semantic integrity should be supported for maintaining the data consistency. In the real world, spatial objects In boundary layer should always meet neighbor objects, and they cannot hold the same name. This characteristic is an implied concept in real world. So, when this characteristic is disobeyed due to the update operations of spatial objects, it is necessary to maintain the integrity of a layer. In this thesis, we propose a spatial-operation-trigger for supporting the integrity of spatial objects. The proposed method is defined a spatial-operation-trigger based on SQL-3 and executed when the constraint condition is violated. A spatial-operation-trigger have the strategy of execution. Firstly, for one layer, the spatial and aspatial data triggers are executed respectively. Secondly, the aspatial data trigger for the other layers is executed. Spatial-operation-trigger for one layer checks whether the executed operation updates only spatial data, aspatial data, or both of them, and determines the execution strategy of a spatial-operation-trigger. Finally, the aspatial data trigger for the other layers is executed. A spatial-operation-trigger is executed in three steps for the semantic integrity of the meet-property of spatial objects. And, it provides the semantic integrity of spatial objects and the convenience for users using automatic correcting operation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1359-1362
• /
• 2004

유무선 통합 환경에서의 기존의 TCP가 가지는 문제점은 혼잡 제어 알고리즘이 무선환경의 에러를 모두 congestion으로 인식하는 것에 있다. 무선환경에 의한 에러일 경우 네트워크의 상황이 좋음에도 불구하고 전송률을 낮춰서 네트워크의 성능을 떨어뜨리게 된다. 따라서 본 논문에서는 Link-layer가 발생시킨 이벤트를 통해 에러의 원인을 명확이 구분하여 기존의 TCP의 큰 수정이 없이도 성능을 크게 향상 시킬 수 있는 혼잡 제어 알고리즘을 제안한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.75-78
• /
• 2007

Mobile IP provides hand-held devices with mobility which allows the user to do work over the network. However, handover time due transfer between access routers causes network delays and data loss. L2Trigger Handover expects this handover to take place, and executes L3 handover before L2 handover takes place, thereby reducing overall handover latency, although it still is an issue since handover latency between AR is not completely eliminated in L2 trigger handover. In this paper took into consideration where MIH is used in MIPv4 and using MIH Table when handover is about to occur in MN(Mobile Node), thereby pre-fetching data needed by Handover. In this way, when the handover is estimated, it improves the init time that L2trigger had. Furthermore we can find that we can execute the handover with shorten init time in smaller and narrow overlap length

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.305-312
• /
• 2007

In this paper, we present a received signal strength (RSS) prediction model to timely Initiate link layer triggers for fast handoff in a wireless LAN system. Noting that the distance between a mobile terminal and an access point is not changed abruptly in a short time interval, an adaptive RSS predictor based on a stationary time series model is proposed. RSS data obtained from ns-2 simulations are used to identity the time series model and verify the predictability of the RSS data. The results suggest that an autoregressive process of order 1 (AR(1)) can be used to represent the measured RSSs in a short time interval and predict at least 1-step ahead RSS with a high confidence level.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.158-170
• /
• 2004

Mobile IP is a base protocol to support host mobility in IP-based wireless network. It is well known that the protocol contains two main delay factors on a handoff process; one is to detect a host movement, and the other is to register the host's current location to its home network. This paper examines Layer 2(L2) handoff procedure in the IEEE 802.11 Wireless LAN, and identifies these L2 triggers that can be usefully applied to Layer 3(L3) handoff. Then, the MCAA(Multiple-Casting using Anchor Agent) mechanism is proposed. It makes use of the L2 trigger and the network topology to construct an anchor agent dynamically, and the multiple-casting scheme to prevent an ongoing packet to be lost. Using a network simulator, the proposed mechanism has been evaluated the handoff delay and the packet lost point of view, in comparison with the regional registration protocol which is the most well known micro mobility support mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.651-659
• /
• 2004

The Fast Handover protocol ［1］ provides seameless handover in wireless If networks by minimizing handover latency, which uses anticipation based on layer 2 (L2) trigger information. Therefore, it incurs higher signaling costs compared with the basic Mobile U protocol. Furthermore, since the L2 trigger is based on fluctuating wireless channel states, the handover anticipation may sometimes be incorrect. In the case of incorrect anticipation, unnecessary buffer space may be used for the purpose of providing a smooth handover. Therefore, it is essentical to analyze these overhead costs, in order to evaluate and compare the performance of Fast Handover with that of the basic Mobile U protocol. In this paper, we analyzed the overhead associated with Fast Handover including the signaling cost and the packet delivery cost. We formulated these costs based on a timing diagram and compared Fast Handover with basic Mobile Ipv6 in terms of their packet loss rates and buffer requirements. Also, we studied the impact of the L2 triggering time on the total overhead cost.

• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.551-558
• /
• 2005

In this paper, we implement the fast handovers for mobile IPv6 (FMIPv6) on Linux system. Due to its dependency on operations in layer-2 (L2), we have added some functions into the network driver to generate triggers as the mobile node moves. We design and implement the FMIPv6 functions divided into two parts as an access router and a mobile node. We compare the packet loss and delay of the FMIPv6 implementation during the handover period with those of the MIPv6 and investigate the performance improvement.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.626-636
• /
• 2009

In Mobile IP-enabled wireless LAN (WLAN), packet flows are corrupted due to the handoff of a mobile node (MN) at the link and network layers, which results in burst packet losses and can cause temporary buffer underflow in a streaming client at the MN. This transient behavior hurts time-sensitive streaming media applications severely. Among many suggestions to address this handoff problem, few studies are concerned with empirical issues regarding the practical validation of handoff options on the time-sensitive streaming media applications. In this paper, targeting seamless streaming over Mobile IP-enabled WLAN, we introduce a seamless media streaming framework that estimates accurate pre-buffering level to compensate the handoff latency. In addition, we propose a link-layer (L2) assisted seamless media streaming system as a preliminary version of this framework. The proposed system is designed to reduce the handoff latency and to overcome the playback disruption from an implementation viewpoint. A packet buffering and forwarding mechanism with L2 trigger is implemented to reduce the handoff latency and to eliminate burst packet losses generated during the handoff. A pre-buffering adjustment is also performed to compensate the handoff latency. The experimental results show that the proposed approach eliminates packet losses during the handoff and thus verify the feasibility of seamless media streaming over Mobile IP-enabled WLAN.