• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.14 no.23
• /
• pp.47-55
• /
• 1991

In automated assembly line, an automatic guided vehicle system(AGVS) represents a mire versatile means of moving materials automatically. In this paper, the vehicles not only provide the transportation medium between workstations but also as mobile workstations. The objective for the developed model is the determination of the appropriate time to control AGV based assembly line in order to minimize production makespan while maximizing the efficient use of vehicles. In this paper, we consider the finished goods of two types which are produced in assembly line. The assembly line is considered with and without queue. Because no buffer are present in case 1. this model seeks to determine the point in time at which vehicles should be launched in the assembly line without experiencing a delay. The case 2 model also seek to determine the vehicle launch times while minimizing production makespan. The assumption in this model is that the maximum queue size cannot exceed 1 at any time.

• International Journal of Computer Science & Network Security
• /
• v.24 no.8
• /
• pp.174-178
• /
• 2024

IoT is collection of different "things" which are associated with open web. As all the things are connected to the Internet, it offers convenience to end users for accessing the resources from "Any Where, Any Time" throughout the globe. At the same time, open nature of IoT provides a fertile ground to an intruder for launching different security related threats. If we can no apply proper security safeguards to the IoT System, then it will be not useful to society. Authentication, Encryption, Trust Management and Secure Routing are different domains to offer security in IoT system. Among them, Authentication is very much important security service as it validates device identity before granting access to system services/ resources. Existing IoT Authentication algorithms are fail to verify device identity in unambiguous way. They are vulnerable to different security threats such as Key Stolen threat, MITM threat and Location Spoofing threat. So, it is a demand of time to design an efficient and secure Multi-factor IoT algorithm which can offer better security and validate device identity in unambiguous way.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.116-120
• /
• 2009

A two-dimensional unsteady inviscid flow solver has been developed for the simulation of complex geometric configurations on adaptive Cartesian meshes. Embedded condition was used for boundary condition and a predictor-corrector explicit time marching scheme was used for time-accurate numerical simulation. The Cartesian mesh generator, which was previously developed for steady problem, was used grid generation for unsteady flow. The solver was based on ALE formulation for body motion. For diminishing the effects of cut-cells, the cell merging method was used. Using cell merging method, it was eliminated the CFL constraints. The conservation problem, which is caused cell-type variation around region swept by solid boundary, was also solved using cell merging method. The results are presented for 2D circular cylinder and missile launching problem.

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.2
• /
• pp.133-138
• /
• 1998

To enhance the ionization level of I-PVD and reduce the coil voltage two approaches were tried and as a diagnostic, optical emission spectroscopy and impedance analysis of the plasma was done with a range of Ar pressures and RF power along with XRD analysis of deposited Ag films. RF sputtering power was pulsed with various on/off time scales to recover the ICP quenched by sputtered metals. This in average enhances the ionization of the sputtered atoms with 10 ms/10 ms and 100 ms/100ms pulse on/off time duration and gives higher (200) preferred orientation over (111) in deposited Ag films. Secondly, Small axial B field about 8G remarkably reduced RF coil sputtering and showed scaled relationship between RF power and magnetic field strength for optimal process condition. From OES of Ar0 and Ar+, wave-like dispersion structure appeared and reduced the coil voltage about 20% at very weak field strength of 8G. This should be studied further to have nay relation with low mode helicon wave launching.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1267-1273
• /
• 2022

Although the Korea shipbuilding industry has recently been receiving most of the orders for ships in the world, production processes are being disrupted due to a shortage of manpower at the production site. This is because the workers quit the shipyard as both work and wages were reduced due to the long slump in the shipbuilding industry. The main reason for the increase in orders was the large-scale orders for Qatar LNG carriers, and the situation in which the technical specifications required for ships are becoming more complex is also working to an advantage. Because the contract delivery time is of utmost importance for ships, the dock launch plan is the most important management item among the shipyard's major processes. The structure to be built in the dock may be a hull that has left the design work or a finished vessel, and in some cases, it is often at the level of some blocks of the hull. When launching, the hull is affected by the hogging or sagging moment due to the fluid force, and securing the safety of the structural strength of the block connection is of utmost importance. In a normal process, the connecting member launches after welding has been completed, but in actual shipbuilders, quick decision-making is needed on the conditions for securing structural safety to comply with the docking schedule. In this study, a detailed analysis method and applicability using a bending stress evaluation method and finite element analysis modelling were analyzed to rationally judge the above-mentioned problems from an engineering point of view. The main contents mentioned in the thesis can be used as good examples when conducting similar structural strength evaluations in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.7
• /
• pp.635-640
• /
• 2015

In this paper, we report a non-explosive separation device for a small satellite which utilize a shape memory alloy actuator. Based on previous research, we try to increase the reliability of the proposed device by changing some components. It enables the proposed device to activate under high preload. Also, we confirm it generates low shock which is main advantage of non-explosive separation device. Finally, vibration test which mimics launching environment and thermal vacuum test which mimics space environment are carried out respectively. After each environment test, we confirm the proposed device is successfully activated. Conclusively, we develop a non-explosive separation device which can activate with low shock under high preload after shock and environment tests(vibration and thermal vacuum tests).

• The International Journal of Costume Culture
• /
• v.13 no.2
• /
• pp.104-117
• /
• 2010

The purpose of this study is to find out the effect of on-the-job experiencing program on the formation of dynamics such as creativity, organizing, and clarity necessary for launching into the society through a cause-and-effect analysis to determine the priority of resources investments and improvements of educational courses. As a result, the selling experience and planned workshop were found to have effect on the creative dynamic that preparatory business starters must secure without fail. This means that e-Fashionn Lab(http://www.bc2d.com) which is an experiencing program, is fully accomplishing its initial objective set up at the time of the system design. In addition, the selling experience and the mini-home page experience were found to have effect on the formation of organizing dynamic of preparatory business starters. This shows that the system design to realize the database of personal friendships and personal information is being used fully as an educational practice instruments. Lastly, the selling experience and planned workshops were found to have effect on the formation of clarity dynamic of preparatory business starters as experiencing characteristic has effect on creativity. However, the community (work room) experience was found to have no effect on the formation of dynamics necessary for preparatory business starters to advance into the society at this study. This signifies that the system input resources should be pushed back in priority and that curriculums and system design should be concentrated on strengthening the selling experience and planned workshop in general.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1511-1519
• /
• 2010

In this paper, we proposed and analyzed a RSSI based cooperative localization algorithm considering wireless propagation characteristics in indoor and outdoor environments for wireless sensor networks, which can estimate the BN position. The conventional RSSI based estimation scheme has low precision ranging due to instability propagation characteristics by time variable. Hence, we implemented ray-launching simulator for analysis of propagation characteristics in 4 case, and experimented proposed localization scheme with 4 RN and 1 to 5 BN. Simulation results show that NLCA has estimation error as 2m-3.5m, however, proposed CLA/ECLA has 1.3m-2.5m/0.5m-1.2m by same environments. Therefore, if we can consider channel characteristics, the proposed algorithm provides higher localization accuracy than RSSI based conventional one.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.875-878
• /
• 2010

In this paper, we proposed a RSSI based cooperative localization algorithm considering wireless propagation characteristics in indoor environment for wireless sensor networks, which can estimate the BN position. The conventional RSSI based estimation scheme has low precision ranging according to time variable propagation characteristics. Hence, we implemented ray-launching simulator for analysis of propagation characteristics in $13.65m{\times}8.7m$, and performed proposed localization scheme with 4 RN and 1 to 5 BN. From the results, if we can consider channal characteristic in proposed ranging scheme, the cooperative localization algorithm with propagation characteristics provides higher localization accuracy than RSSI based conventional one.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.708-715
• /
• 2010

In Strapdown Inertial Navigation System, alignment accuracy is the most important factor to determine the performance of navigation. However by an existing self-alignment method, it takes a long time to acquire the alignment accuracy that we want. So, to attain the desired alignment accuracy in as little as $\bigcirc$ minutes, we have developed the precise multi-position alignment method. In this paper, it is proposed a inertial measurement matching transfer alignment method among alignment methods to minimize the alignment error in a short time. It is based on a mixed velocity-DCM matching method be suitable to the operating environment of vertical launching system. The compensation methods to reduce misalign error, especially azimuth angle error incurred by measurement time-delay error and body flexure error are analyzed and evaluated with simulation. This simulation results are finally confirmed by experimentations using FMS(Flight Motion Simulator) in Lab and the integration test to follow the fire control mission.