• Journal of Physiology & Pathology in Korean Medicine
• /
• v.28 no.2
• /
• pp.129-136
• /
• 2014

The "WuQinXi" exercise, one of the medical Qi-gongs, is an exercise maximizing human's self healing power and has been confirmed to be effective significantly at several modern researches. There are many exercise therapies in western medcine, such as Willams's flexion exercise, Mckenzie's extension exercise, vertebral stabilization exercise and so on. However, there isn't a special exercise therapy which can be applied for medical practice in oriental medicine. So we selected 24 motions which are related with lumbar movements from 3 type "WuQinXi" exercises ; 20 mode, 30 mode, and 40 mode. And then, we classified them according to lumbar movements as flexion, extention, lateral bending and rotation, and also functions as stabilization and rubbing. Next, with these classifications, we assorted them by kinds of lumbar spinal disease as HIVD(herniation of intervertebral disc), spinal stenosis, spondylolysis and spondylolisthesis, facet joint syndrome, compression fracture and spondylosis. We expect that "WuQinXi" exercise be a exercise therapy for lumbar spinal disease at an oriental medical clinic in this way. Oriental medical doctors will be able to teach easily patients "WuQinXi" exercise's motions at clinic, depending on kinds of lumbar spinal disease each patient suffers from. We plan to study the effect of "WuQinXi" exercise by comparing patients who do the "WuQinXi" exercise with the patients who do the western medical exercise therapy.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.517-524
• /
• 2012

In this study, the effects of the inelastic shear behavior of beam-column joint and the vertical distribution of lateral load are evaluated considering higher modes on the response of RC OMRF using the pushover analysis. A structure used for the analysis was a 5-story structure located at site class SB and seismic design category C, which was designed in accordance with KBC2009. Bending moment-curvature relationship for beam and column was identified using fiber model. Also, bending moment-rotation relationship for beam-column joint was calculated using simple and unified joint shear behavior model and moment equilibrium relationship for the joint. The results of pushover analysis showed that, although the rigid beam-column joint overestimated the stiffness and strength of the structure, the inelastic shear behavior of beam-column joint could be neglected in the process of structural design since the average response modification factor satisfied the criteria of KBC2009 for RC OMRF independent to inelastic behavior of joint.

• Journal of the Korean Arthroscopy Society
• /
• v.7 no.1
• /
• pp.92-95
• /
• 2003

A 34-year-old man with ACL total rupture due to slip down injury, had received ACL reconstruction using autogenous hamstrings tendon with cross-pin femoral fixation. Postoperative course was as usual. But postoperative 3 months later, he complained posterolateral knee pain, recurrent effusion and mild instability. He was managed repeatitive aspiration and nonsteroid antiinflammatory drugs but was failed to relieve symptoms & signs. In CT scans, perforation of posteromedial femoral cortex of lateral femoral condyle was found. In second look arthroscopy, two pieces of broken femoral cross pin were found in between tibiofemoral Joint which was badly injured cartilage. We considered malposition of pins was the main cause of failure. We propose that femoral tunnel must be made more acute angle and femoral cross-pin guide must be positioned more external rotation 10-20 degree than transepicondylar axis made confirm the cross-pin tunnel position in order to avoid posterior cortex perforation and early failure.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.103-114
• /
• 1993

The purpose of this study was to determine whether any difference existed in craniofacial morphology between parents of children with cleft lip and/or palate and parents of children without cleft lip and/or palate as well as the characteristics of craniofacial morphology in parents of children with cleft lip and/or palate. Thirty three measurements of the various regions of cranium and face were obtained from lateral cephalometric radiograms in parents of 28 children with cleft lip and palate, 18 children with cleft lip, and 22 children with cleft palate. There were 28 couples and 40 single parents in this sample. There were 92 individuals including 41 males and 51 females. The measurements were compared with those in control subjects, including 40 adult males and 40 adult females, who had no history of craniofacial abnormalities. The total sample was compared for the sex independently. The obtained results were as follows. 1. In the cranium, both parents of cleft children had significantly shorter posterior cranial base length(S-Ba). 2. In the upper face, a significantly shorter anteroposterior length of maxilla(A'-Ptm'), particularly in the anterior region (A'-K), anterior facial depth(A-SBaL), posterior facia! height(Ptm'-SNL) and relation of subnasale to the cranial base (∠BaN'Sn) were noted in fathers of cleft children. But, all measurements were not found to be significantly different between experimental group and control group in all mothers. 3. In the lower face, both parents of cleft children showed a significantly greater Y axis angle(∠NSGn) and ramal plane angle(∠SNL-RP) in fathers of cleft children. Thus both patents showed a posteriorly rotation of mandible. The thickness of the lower lip(B-B') was significantly thicker in fathers of cleft children. 4. In the facial profile, a significantly shorter posterior facial height(S-Go) and greater angle of soft tissue facial convexity (∠BaN'Pog') were noted in the fathers of cleft children. But, all measurements were not found to be significantly different between experimental group and control group in all mothers.

• Agricultural and Biosystems Engineering
• /
• v.6 no.2
• /
• pp.47-53
• /
• 2005

AMachine vision is a promising tool for the autonomous guidance of farm machinery. Conventional CCD camera for the machine vision needs a desktop PC to install a frame grabber, however, a web camera is ready to use when plugged in the USB port. A web camera with a notebook PC can replace existing camera system. Autonomous steering control system of this research was intended to be used for combine harvester. If the web camera can recognize cut/uncut edge of crop, which will be the reference for steering control, then the position of the machine can be determined in terms of lateral offset and heading angle. In this research, a white line was used as a cut/uncut edge of crop for steering control. Image processing algorithm including capturing image in the web camera was developed to determine the desired travel path. An experimental vehicle was constructed to evaluate the system performance. Since the vehicle adopted differential drive steering mechanism, it is steered by the difference of rotation speed between left and right wheels. According to the position of vehicle, the steering algorithm was developed as well. Evaluation tests showed that the experimental vehicle could travel within an RMS error of 0.8cm along the desired path at the ground speed of $9\sim41cm/s$. Even when the vehicle started with initial offsets or tilted heading angle, it could move quickly to track the desired path after traveling $1.52\sim3.5m$. For turning section, i.e., the curved path with curvature of 3 m, the vehicle completed its turning securely.

• Science of Emotion and Sensibility
• /
• v.5 no.4
• /
• pp.67-75
• /
• 2002

The purpose of this study is to assess the ability of balance control in virtual moving surround stimulation using head mount display (HMD) device and force platform in patients with brain injury. Fifteen patients with stroke (mean age 54.47 yrs) and fifteen healthy normal persons participated. COP parameters were obtained total path distance, frequency of anterior-posterior and medial-lateral component by FFT analysis, weight-spectrum analysis in the two different conditions; (1) during comfortable standing with opened or closed eyes, (2) during virtual moving surround stimulation delivered using HMD with four different moving pattern. Moving patterns consisted of close-far, superior-inferior lilting (pitch) , right-left tilting (roll) and horizontal rotation (yaw) movement. In all parameters, the test-retest reliability was high. Also, the construct validity of virtual moving surround stimulation was excellent (p＜0.05). A posturographic balance assessment system equiped with virtual moving surround stimulation using HMD is considered clinically useful in evaluation of balance control in patients with brain injury.

• Journal of Chest Surgery
• /
• v.27 no.12
• /
• pp.1008-1014
• /
• 1994

Increased interest in alternative approach to thoractomy has developed because of the considerable morbidity associated with the standard posterolateral thoracotomy[ST]. Muscle sparing thoracotomy is appeared as excellent alternative because of less postoperative pain and morbidity than standard posterolateral one. Vertical axillary muscle sparing thoracotomy[VM] is the newly revised modified muscle sparing thoracotomy that overcomes the disadvantages of previous lateral muscle sparing thoracotomy such as seroma, cosmetic problems, and need of subcutaneous drains. We conducted a prospective study of 45 consecutive patients to compare postoperative pain, muscle strength of serratus anterior and latissimus dorsi, and range of motion of the shoulder girdle between ST and VM group. There were no difference in preoperative status, surgical procedure, morbidity, mortality and hospital stay between two groups. But there were significant less postoperative narcotics requirements, more preserved latissimus dorsi and serratus anterior muscle strength, nd larger range of motion of shoulder girdle [ especially flexion and internal rotation in VM group. The opening time was prolonged[p<0.01] but closing time was less in VM group [p<0.01]. The sum of opening and closing time was not different in two group. The length of incision line was shorter in VM group. The vertical skin incision was concealed by the upper arm.In conclusion vertical axillary muscle sparing thoracotomy is good alternative for various intrathoracic procedures with less postoperative pain, well preserved muscle strength,increased range of motion of the shoulder girdle and impressive cosmetic outcome.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.4
• /
• pp.689-696
• /
• 2009

This study was conducted to examine the effects of the lumbar stabilization exercise (LSE) on fall prevention in elderly females (n = 21) by measuring changes in the isometric strength, multifidus, transverse abdominis muscle thickness, and posture stability index. The strength of isometric contraction was measured by the 3-D Pegasus system ; the thickness of the multifidus and transverse abdominis were measured by using Sonoace 6000C, and the posture stability index was measured using a computerized Biodex Balance System SD apparatus analysis. These results lead us to the conclusion that flexion and extension, left rotation on strength of isometric contraction, and thickness of the transverse abdominis (when released) statically increased. Overall, the anterior/posterior and medial/lateral elements in the posture stability index statically decreased, Consequently, the LSE should the prevent falls in elderly females.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.619-626
• /
• 2009

The use of thin-walled flexural members has proven to be a practical way to achieve the lowest cost in the construction of prefabricated long-span, low-rise building frames in steel. On the other hand, most of these structures are subjected to corrosion due to environmental exposure, which can reduce their carrying capacity. Corrosion damage is a serious problem for these structures as it causes thickness loss. That is, the class of a section (plastic, compact, non-compact, or slender) may change from one to another due to the loss of thickness of the compression flange and web due to corrosion. In this study, the effects of corrosion on thin-walled members in long-span steel frames were evaluated with regard to the moment-rotation curve, initial stiffness, maximum load capacity, stiffness in the post-maximum capacity, and energy absorption.

• Structural Engineering and Mechanics
• /
• v.75 no.5
• /
• pp.529-540
• /
• 2020

The mechanical properties of timber construction have drawn more attention after the 2013 Lushan earthquake. A strong desire to preserve this ancient architectural styles has sprung up in recent years, especially for residential buildings of the mountainous areas. In the column-and-tie timber construction, continuous-tenon joints are the most common structural form to connect the chuanfang (similar to the beam in conventional structures) and the column. To study the cyclic performance of the continuous-tenon joints in column-and-tie timber construction, the reversed lateral cyclic loading tests were carried out on three 3/4 scale specimens with different section heights of the chuanfang. The mechanical behavior was assessed by studying the ultimate bending capacity, deformation ductility and energy dissipation capacity. Test results showed that the slippage of chuanfang occurred when the specimens entered the plastic stage, and the slippage degree increased with the increase of the section height of chuanfang. An obvious plastic deformation of the chuanfang occurred due to the mutual squeezing between the column and chuanfang. A significant pinching was observed on the bending moment-rotation curves, and it was more pronounced as the section height of chuanfang increased. The further numerical investigations showed that the flexural capacity and initial stiffness of the continuous-tenon joints increased with the increase of friction coefficient between the chuanfang and the column, and a more obvious increasing of bending moment occurred after the material yielding. The compressive strength perpendicular to grain of the material played a more significant role in the ultimate bending capacity of continuous-tenon joints than the compressive strength parallel to grain.