• 한국지반환경공학회 논문집
• /
• 제5권2호
• /
• pp.33-39
• /
• 2004

대부분의 말뚝기초는 두부 고정상태이지만, 수평재하시험은 일반적으로 두부 자유상태에서 시행되었다. 이번 논문은 두가지 경우(두부고정, 두부자유)에 대한 말뚝깊이별 수평변위와 이론 방정식과 현장수평재하시험을 비교해가며 대구경현장타설말뚝의 수평거동을 분석한 말뚝현장수평재하시험을 수행하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.36-43
• /
• 2004

Most of pile foundations are fixed head condition, but lateral loading test for pile is performed under free head condition generally In this study, a lateral loading test for a large diameter drilled shaft was performed under the fixed pile head and the free pile head condition, where lateral displacement along the pile depth was measure. Test results and theoretical values were compared and analyzed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.641-652
• /
• 2005

In this paper, the Coefficient of Subgrade Reaction was analyzed from the data which were the results of lateral pile loading tests and pressuremeter tests on construction sites. The prediction method with N-value was compared with lateral pile loading tests and the results of lateral pile loading tests were compared with the prediction method considering diameter of a pile. Also, the results of lateral pressuremeter tests were compared with those of lateral pile loading tests. As a result, consideration for a diameter and lateral deformation of a pile was needed when the coefficient of horizontal subgrade reaction is presumed. Therefore, a formula which is taking into account the allowable deformation of a pile was suggested from lateral pressuremeter tests in this study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.913-922
• /
• 2009

Fourteen model pile load tests using a calibration chamber and instrumented model pile were preformed to investigate the variation of the behaviors of driven piles in sands with soil and lateral cyclic loading conditions. Results of the model tests showed that the first loading cycle generated more than 70% of the pile head rotation developed for 50 lateral loading cycles. Lateral cyclic loading also made an increase of the ultimate lateral load capacity of piles for $K_0$=0.4 and an decrease for $K_0$ higher than 0.4. Higher portion of the increase or decrease in the ultimate lateral load capacity by lateral cyclic loading was generated for the first loading cycle due to densification of loosening of the soil around the pile by lateral cyclic loading. It was also observed that a two-way cyclic loading caused higher ultimate lateral load capacity of driven piles than a one-way cyclic loading. When the pile was in the ultimate state, the maximum bending moment developed in the pile increased with increasing $K_0$ value of soil and was insensitive to the magnitude and number of lateral cyclic loading.

• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.21-34
• /
• 2023

In order to analyze the effect of the cyclic lateral loading on the response of a pile-soil system, a full-scale single steel pile was subjected to one-way cyclic loading. The test pile was driven into a bi-layered soil consisting of a normally consolidated saturated clay overlying a silty sandy layer, the site being submerged by water up to one meter above the mudline in order to reproduce the conditions of an offshore pile foundation. The aim of this paper is to present the main results of interpretation of the cyclic lateral tests in terms of pile deflections, bending moment, and cyclic P-Y curves. From these latter an absolute secant reaction modulus E_AS,N was derived and a simple calculation model of the test single pile is proposed based on this modulus. Two applications of the proposed model are carried out, one with a 2D finite element modelling, and the second with a load transfer curves-based method.

• 한국지반환경공학회 논문집
• /
• 제7권2호
• /
• pp.15-24
• /
• 2006

본 연구에서는 수평재하시험과 공내수평재하시험 결과를 이용하여 지반반력계수를 각각 분석하였다. 또한 이들 값과 수평재하시험 실시 위치에서의 N치를 이용하여 도로교표준시방서, 일본토목학회, Hukuoka식, 일본도로협회 제안식으로 산정한 수평방향 지반반력계수를 비교 및 분석하여 제안식별 적용성을 평가하고자 하였다. 수평방향 지반반력계수 산정시 지반의 변형계수가 큰 영향을 미치는 것으로 볼 때 합리적인 지반의 변형계수 산정이 매우 중요하며, 제안식별 변형계수 적용에 대해 재하시험 결과를 이용하여 검토하였다. 특히 공내수평재하시험 결과를 이용하여 지반반력계수를 산정하는 방법은 수평변위를 고려할 수 없는 등의 문제점이 있는 것으로 나타나 사질토 지반의 수평방향 지반반력계수 산정시 말뚝의 직경과 수평변위를 고려할 수 있는 식을 제안하였으며, 아울러 N치를 이용한 지반의 변형계수를 고려하는 제안식에 대해서는 수평재하시험과 비교하여 지반의 변형계수 추정식을 제안하였다.

• 한국지반신소재학회논문집
• /
• 제22권3호
• /
• pp.97-103
• /
• 2023

최근 말뚝기초의 수평저항력에 대한 연구들이 활발히 이루어지고 있다. 말뚝기초의 수평저항력에 대한 실험연구들의 경우 변위제어법 또는 하중제어법을 사용하고 있다. 하지만 변위제어법의 경우 말뚝에 가해지는 하중의 속도에 따라 말뚝의 수평저항력이 달라진다. 따라서 본 연구에서는 모형실험을 통해 수평재하속도에 따른 말뚝기초의 수평저항력 변화를 파악하고자 한다. 실험결과 말뚝두부에 가해지낸 수평재하속도가 빠를수록 말뚝의 수평저항력이 감소하는 경향을 보였다. 이를 확인하기 위해 재하속도에 따른 지반과 말뚝의 측면변경 모형실험을 추가적으로 진행하였으며, 그 결과 재하속도가 빠를수록 말뚝의 회전절점의 깊이가 감소하였다. 역해석을 통해 수평재하 속도에 따른 회전절점의 깊이 변화를 파악하였다. 수평재하속도에 따른 말뚝기초의 수평저항력과 회전절점의 깊이 변화를 통해, 말뚝의 수평재하시험시 재하속도는 1.5mm/min 이내로 시험하는 것을 제안하였다.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1396-1404
• /
• 2012

복합말뚝은 서로 다른 재질을 사용하여 말뚝을 구성하는 말뚝으로 상부는 강관말뚝 하부는 콘크리트 말뚝으로 구성된 말뚝을 선 굴착 공법으로 시공하였다. 말뚝에는 7쌍의 변형률계와 경사계를 설치하여 말뚝의 수평재하시험 중 말뚝에 작용하는 응력과 변위를 측정하였다. 측정된 계측치는 여러 가지 이론적 공식을 이용하여 분석 비교하는 역 해석을 수행하였다. 분석결과 공식들로부터 예측한 말뚝에 작용하는 응력은 실제 측정된 값보다 크게 평가 되었으며, 말뚝상부에 응력이 크게 측정되다가 말뚝깊이에 따라 급격하게 감소하는 경향을 보였다. 측정된 응력은 모두 말뚝재질의 응력을 초과 하지 않아 복합말뚝의 설계개념을 검증할 수 있었다.

• 한국철도학회논문집
• /
• 제7권2호
• /
• pp.149-154
• /
• 2004

Pile Bridge Abutments constructed on a soft base are affected by a lateral flow. Laterl flow pressure acting on Pile is very difficult to calculate because of, interation of ground and Pile. So, it is different to estimate displacement of Pile Bridge Abutments. This paper studied about possibility of the displacement estimation of Pile Bridge Abutments by using the equivalent sheet pile wall theory that was Randolph proposed in 1981. Analysis program through using the SAGE CRISP that is FEM program. Analysis data used Centrifuge test results of Springman(1991), Bransby(1997) and Ellis(1997)'s paper. In conclusion, maxium displacement that is carried out by centrifuge test and numerical analysis has occured at the head of pile, as well as Maximum displacement of pile is closely similar. But the moment acting on pile of numerical analysis is under estimated compare to the centrifuge test. Through the comparative study, it is found that displacement estimation by equivalent sheet pile wall is in relatively good agreement with the results of centrifuge test.

• Geomechanics and Engineering
• /
• 제38권2호
• /
• pp.139-155
• /
• 2024

The piled raft foundations are subjected to lateral loading under the action of wind and earthquake loads. Their bearing behavior and flexural responses under these loadings are of prime concern for researchers and practitioners. The insufficient experimental studies on piled rafts subjected to lateral loading lead to a limited understanding of this foundation system. Lateral load sharing between pile and raft in a laterally loaded piled raft is scarce in literature. In the present study, lateral load-displacement, load sharing, bending moment distribution, and raft inclinations of the piled raft foundations have been discussed through an instrumented scaled down model test in 1 g condition. The contribution of raft in a laterally loaded piled raft has been evaluated from the responses of pile group and piled raft foundations attributing a variety of influential system parameters such as pile spacing, slenderness ratio, group area ratio, and raft embedment. The study shows that the raft contributes 28-49% to the overall lateral capacity of the piled raft foundation. The results show that the front pile experiences 20-66% higher bending moments in comparison to the back pile under different conditions in the pile group and piled raft. The piles in the piled raft exhibit lower bending moments in the range of 45-50% as compared to piles in the pile group. The raft inclination in the piled raft is 30-70% less as compared to the pile group foundation. The lateral load-displacement and bending moment distribution in piles of the single pile, pile group, and piled raft has been presented to compare their bearing behavior and flexural responses subjected to lateral loading conditions. This study provides substantial technical aid for the understanding of piled rafts in onshore and offshore structures to withstand lateral loadings, such as those induced by wind and earthquake loads.