• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.581-583
• /
• 2006

• 대한전자공학회논문지
• /
• 제24권1호
• /
• pp.133-139
• /
• 1987

A phase-locked Channel-Substrate-Planar(CSP) laser arrays is described. Arrays of emitters with weak coupling are operated in a set of discrete modes determined by the number and spacing of the emitters. The interactions between emitters lead to a splitting of the wave-length and gain which are calculated from the coupling strength. Phase-locked arrays has exhibited to CW output-power as high as 80 m W and the highest order mode will have preferred oscillation. A strong hole burning is occurred at p=30m W. The most stable lasing mode is occurred at element spacing S=3.5\ulcornerm and there is no coupling at S>7 \ulcornerm.

• 한국진공학회지
• /
• 제15권4호
• /
• pp.427-433
• /
• 2006

자발적인 미세상 분리에 의해 실린더형의 규칙적인 배열을 형성하는 고분자 공중합체와 알루미늄의 양극산화에 의해 실린더형 기공 배열이 형성되는 알루미나 템플레이트를 이용하여 다양한 물질의 나노점 배열을 형성하였다. 펄스형 레이저 기상 증착법을 이용하여 은, 니켈, 산화아연, 실리콘, 코발트 / 백금 나노점 배열을 얻었는데, 나노점의 크기와 배열은 템플레이트의 기공 크기와 배열을 보여주었다. 이러한 템플레이트 기법을 이용하면 나노점의 밀도는 고 분자 공중합체와 알루미나의 경우 각각 $6{\times}10^{11}/cm^2$ 와 $1{\times}10^{10}/cm^2$ 이다. 이중 에르븀이 도핑된 실리콘 나노점과 ZnO 나노점 배열은 PL 측정을 통하여 물질의 광학성질에 관해 알아보았다. 에르븀이 도핑된 실리콘 나노점 배열은 $1.54{\mu}m$에서 강한 빛을 내며 ZnO 나노점 배열은 380 nm 에서 강한 PL 세기를 나타낸다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.154-154
• /
• 2000

FED(Field emission display)의 FEAs(Field emitter arrays)에 형성되어 있는 micro-tip 은 tip 표면의 오염이나 진공내부의 잔류가스에 대단히 민감하다. 특히, emitter 물질의 일함수 및 겉모양 같은 기하학적 요소에 민감한 전계방출 소자의 특성상 tip 선단이 oxidation 될 경우 일함수가 증가하여 전자방출에 필요한 구동전압이 증가하고 전자 방출의 불균일성이 커지는 문제점이 발생한다. 이에 고진공의 동작 환경 및 FEAs 제작과정이나 공기의 노출에 발생하는 tip 표면의 오염물질 제거가 요구된다. 따라서 본 연구에서는 40$\times$40mm2 FEAs에 laser power, scan speed을 달리하며 laser(cw Nd-YAG, 1064nm)을 조사하였다. laser cleaning 효과를 보기 위해 laser irradiation 전, 후에 진공도 5$\times$10-7torr irradiation 후에 emitter tip의 뚜렷한 기하학적 모양의 변화를 볼 수는 없었지만, I-V 특성이 향상 되는 것을 볼 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.199-199
• /
• 2009

Recently, polymeric microlens arrays have become important elements in many applications. Microlens arrays have been used to enhance luminance efficiency and luminance power efficiency of light-emitting diodes (LEDs) and organic LEDs. Many processes for fabrication of microlens array are studied. Though the MLA has been fabricated by electroformed mold, LIGA process and reflow method, these methods were required masks, multiple process steps and post processing. In this paper, we proposed rapid and direct UV laser direct fabrication process using colorless liquid photopolymer, NOA60 for polarization activated microlens. The microlens arrays are formed on the NOA60 on glass, after the focused laser energy was irradiated to the material. The diameter of MLA was varied from 42 to 88 ${\mu}m$, and the height from 0.9 to 1.6 ${\mu}m$. The MLA fabricated using NOA60 shows more then 85% transmittance as well as good hardness for optical module.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.239-240
• /
• 2006

For longer than picosecond pulses, bulk damage inside defect-free dielectrics involves the heating and multiplication of spurious electrons by the incident laser beam and transfer of this energy to the lattice. The situation is quite different for femtosecond pulses which are shorter than the time scale for electron energy transfer to the lattice. Damage caused by these pulses is produced with smaller statistical uncertainty and is controllable on a microscopic scale. These properties can be exploited to produce laser devices such as arrays of damage dots for all optical memories with high data storage density or arrays of parallel grooves to form transmission gratings. In this work, we observed characteristic of the femtosecond laser machining in BK7 and fused silica.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.322-325
• /
• 1999

We report fiber guiding experiments on the Photonic Quantum Ring(PQR) laser diode. In the 1km transmission measurements, we find that the PQR performs much better than the VCSEL. This suggests that the PQR laser is very promising candidate for LAN-range optical data communications. On the other hand, we have also fabricated 8$\times$8 PQR laser arrays and measured spatial decays for free space properties without using any guiding optics, which showed about 1m distance of spectral angle sensing.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.140-151
• /
• 1996

In this paper, we analyze the variations of thermal characteristics of LD (laser diode) arrays packaged by a flip-chip bonding method. When we simulate the temperature distribution in LD arrays with a BEM (boundary element method) program coded in this paper, we find that thermal crosstalks in LD arrays packaged by the flip-chip bonding method increases by 250-340% compared to that in LD arrays packaged by previous methods. In the LD array module packaged by the flip-chip bonding technique without TEC (thermo-electric cooler), the important parameter is the absolute temperature of the active layer increased due cooler), the important parameter is the absolute temperature of th eactiv elayers of LD arrays to thermal crosstalk. And we find that the temperature of the active layers of LD arrays increases up to 125$^{\circ}C$ whenall four LDs, without a carefully designed heatsink, are turned on, assuming the power consumption of 100mW from each LD. In order to reduce thermal crosstalk we propose a heatsink sturcture which can decrease the temeprature at the active layer by 40%.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.78-78
• /
• 1999

Experimental studies of laser micromachining on Mo metal using piezo Q-switched Nd:YAG laser have been performed. Miniaturized microcolumn electron gun arrays as a potential electron beam lithography or portable mini-scanning electron microscope application have recently extensively examined. For these purpose, the electro-static electron lens and deflector system called microcolumn has to be assembled. The conventional microcolumn fabrication technique would gave a limitation on the minimization of aberration. The current technique of a 1 $\mu$m misalignment would lead to ~1.3 nm coma. In order to reduce aberration, assembling the microcolumn component followed by laser drilling should be very beneficial. In this report, we will address the preliminary report of laser micromachining on Mo substrate using piezo Q-switched Nd:YAG laser. The geometrical figures, such as the diameter and the depth of the frilled aperture are dependent upon the total energy of the laser pulse train, laser pulsewidth, and the diameter of laser beam in addition to the materials-dependent parameters.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.725-730
• /
• 2014

The effect the diameter of silver nanorod arrays whose distance between the nanorods was uniform at 65 nm have on Surface-enhanced Raman Scattering (SERS) has been studied by varying the diameter from 28 to 51 nm. Nanorod length was fixed at approximately 62 nm, which is the optimum length for SERS by excitation with a 632.8 nm laser line. The transverse and longitudinal modes of the surface plasmon of these silver nanorods were near 400 and 630 nm, respectively. The extinction of the longitudinal mode increased with increasing nanorod diameter, while the transverse mode did not change significantly. High-quality SERS spectra of p-aminothiophenol and benzenethiol adsorbed on the tips of the silver nanorods were observed by excitation with a 632.8 nm laser line. The SERS enhancement increased with increasing nanorod diameter. We concluded that the SERS enhancement increases when the diameter of silver nanorods is increased mainly by increasing the excitation efficiency of the longitudinal mode. The enhancement factor for the silver nanorods with a 51 nm diameter was approximately $2{\times}10^7$.