• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.115-127
• /
• 1999

The charged clusters or particles, which contain hundreds to thousands of atoms or even more, are suggested to form in the gas phase in the thin film processes such as CVD, thermal evaporation, laser ablation, and flame deposition. All of these processes are also used in the gas phase synthesis of the nanoparticles. Ion-induced or photo-induced nucleation is the main mechanism for the formation of these nanoclusters or nanoparticles inthe gas phase. Charged clusters can make a dense film because of its self-organizing characteristics while neutral ones make a porous skeletal structure because of its Brownian coagulation. The charged cluster model can successfully explain the unusual phenomenon of simultaneous deposition and etching taking place in diamond and silicon CVD processes. It also provides a new interpretation on the selective deposition on a conducting material in the CVDd process. The epitaxial sticking of the charged clusters on the growing surface is gettign difficult as the cluster size increases, resulting in the nanostructure such as cauliflowr or granular structures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.785-789
• /
• 2005

Low temperature deposition of silicon and silicon nitride films by catalytic CVD technique was studied for application to thin film transistors on plastic substrates for flexible AMOLEDs. The substrate temperature initially held at room temperature, and was controlled successfully below $150^{\circ}C$ during the entire deposition process. Amorphous silicon films having good adhesion, good surface morphology and sufficiently low content of atomic hydrogen were obtained and could be successfully crystallized using excimer laser without a prior dehydrogenation step. $SiN_x$ films showed a good refractive index, a high deposition rate, a moderate breakdown field and a dielectric constant. The Cat-CVD silicon and silicon nitride films can be good candidates for fabricating thin films transistors on plastic substrates to drive active-matrix organic light emitting display.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.451-454
• /
• 2000

We have grown vertically aligned carbon nanotubes in a large area of Co-Ni codeposited Si substrates by the thermal CVD usign $C_2H_2$ gas. Since the discovery of carbon nanotubes, growth of carbon nanotubes has been achieved by several methods such as laser vaporization, arc discharge, and pyrolysis. In particular, growth of vertically aligned nanotubes is important to flat panel display applications. Recently, vertically aligned carbon nanotubes have been grown on glass by PECVD. Aligned carbon nanotubes can be also grown on mesoporous silica and Fe patterned porous silicon using CVD. In this paper, we demonstrate that carbon nanotubes can be vertically aligned on catalyzed Si substrate when the domain density of catalytic particles reaches a certain value. We suggest that steric hindrance between nanotubes at an initial stage of the growth forces nanotubes to align vertically and each nonotubes are grown in bundle.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.549-555
• /
• 1996

Diamond Like Carbon film is amorphous film which is considered to consist of three coordinate graphite structure and tetrahedron coordinate diamond structure. Its hardness, thermal conductivity and chemical stability are nearly to one of diamond. It is well known to become semi-conductor by doping of inpurity. In this study Diamond Like Carbon film was synthesized by Microwave Plasma CVD in the gas mixture of hydrogen-methan-nitrogen and doped of nitrogen on the single-crystal silicon or silica glass. The temperature of substrate and nitrogen concentration in the gas mixture had an effect on the bonding state, structural properties and conduction mechanism. The surface morphology was observed by Scanning Electron Microscope. The strucure was analyzed by laser Raman spectrometry. The bonding state was evaluated by electron spectroscopy. Diamond Like Carbon film synthesized was amorphous carbon containing the $sp^2$ and $sp^3$ carbon cluster. The number of $sp^2$ bonding increased as nitrogen concentration increased from 0 to 40 vol% in the feed gas at 1233K substrate temperature and at $7.4\times10^3$ Pa. Increase of nitrogen concentration made Diamond Like Carbon to be amorphous and the doze of nitragen could be controlled by nitrogen concentration of feed gas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.42-42
• /
• 2007

In the future, electronic components will be integrated on flexible polymer substrates and then miniaturized by thin films using suitable thin film technologies. In this article, the concept of a room temperature CVD is demonstrated using $Bi_3NbO_7$ (BNO) films with a cubic fluorite structure and their structural and electrical properties were investigated in films deposited without substrate heating. Effects of substrate temperature on electrical properties of BNO films were also studied. Films deposited without substrate heating (real temperature of $50^{\circ}C$) show partially crystallized BNO single phases with grain size of approximately 6.5 nm. Their dielectric and leakage properties are comparable to those of films deposited by pulsed laser deposition at room temperature. The concept of room temperature CVD will become a new paradigm in the deposition of dielectric thin films for flexible electron device applications.

• 한국진공학회지
• /
• 제13권3호
• /
• pp.103-108
• /
• 2004

Atomic Layer Epitaxy (ALE)법으로 Zn 소스인 DEZn와 oxygen 소스인 $H_2O$를 사용하여 (001) sapphire 기판 위에 기판온도를 ALE 공정온도 범위 인 $170^{\circ}C$와 CVD 공정온도범위 인 $400^{\circ}C$에서 ZnO 박막을 증착하였다. 후열처리에 따른 발광 특성을 조사하기 위해서 산소분위기에서 600∼$1000^{\circ}C$의 온도로 1 시간 동안 후열처리한 후에 He-Cd laser를 사용하여 Photoluminescence (PL) 특성을 측정하였다. $170^{\circ}C$와 $400^{\circ}C$에서 증착된 시편의 경우 모두 as-grown 상태에서는 거의 발광이 일어나지 않았으나 후열처리를 거치면서 발광이 일어났으며 열처리온도가 높을수록 발광강도는 증가하였다. $400^{\circ}C$에서의 증착된 시편의 경우는 CVD 반응이 일어나 Zn-Zn 결합이 많이 생성되어 열처리 온도가 증가하여도 발광강도가 약하였고 가시광 영역의 발광이 크게 증가한 반면 $170^{\circ}C$에서 증착된 시편의 경우는 열처리 온도가 증가할수록 UV영역의 발광강도만이 크게 증가하였으며 가시광 영역에서의 발광은 거의 증가하지 않았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.71-72
• /
• 2006

플라스틱 기판 위에 유도 결합 플라즈마 화학적 기상 증착장치 (Inductively Coupled Plasma Chemicai Vapor Deposition, ICP-CVD) 를 사용하여 실리콘 산화막 ($SiO_2$)을 증착하고, 엑시머레이저 어널링 (Excimer Laser Annealing, ELA) 과 $N_{2}O$ 플라즈마 전처리를 통해, 전기용량-전압(Capacitance-Voltage, C-V) 특성과 항복 전압장 (Breakdown Voltage Field) 과 같은 전기적 특성을 개선시켰다. 에너지 밀도 $250\;mJ/cm^2$ 의 엑시머 레이저 어닐링은 실리콘 산화막의 평탄 전압 (Flat Band Voltage) 을 0V에 가까이 이동시키고, 유효 산화 전하밀도 (Effective Oxide Charge Density)를 크게 감소시킨다. $N_{2}O$ 플라즈마 전처리를 통해 항복 전압장은 6MV/cm 에서 9 MV/cm 으로 향상된다. 엑시머 레이저 어닐링과 $N_{2}O$ 플라즈마 전처리를 통해 평탄 전압은 -9V 에서 -1.8V 로 향상되고, 유효 전하 밀도 (Effective Charge Density) 는 $400^{\circ}C$에서 TEOS 실리콘 산화막을 증착하는 경우의 유효 전하 밀도 수준까지 감소한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.115-118
• /
• 1990

Recently, it has been reported that the Insulating films deposited by PECVD show some degradation under somewhat high electric field. In this paper, we Introduce silicon nitride films deposited by LCVD, and evaluate the breakdown and wear-out of these films by TDDB test. Further, failure times against electric field are examined and acceleration factors $\gamma$ are obtained for each case. As a result, it is shown that the breakdown and wear-out limitation for these films is improved.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.115-115
• /
• 2003

Silica nanostructures have been attached considerable attention because of theirs potential application in mesoscopic research and the potential use of large surface area structure of catalysts. SiO2 nannowire and nanorods was synthesized various methods including thermal evaporation, chemical vapor deposition (CVD), and laser ablation methods. In this experiments, SiO2 nanowire were grown using thermal evaporation method followed by VS (Vapor-Solid) growth mechanisms. Grown SiO2 nanowires were amorphous phases because of its low growth temperatures. Grown nanowires diameters were about 20-40nm at all growth conditions, but its microstructres were different by that used substrate because of it's oxygen contents.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.150-150
• /
• 2003

wide bind gap과 wurtzite hexagonal structure를 가지고 있으며 청색 발광 및 청자색 레이저 특성을 보이는 III-V족 화합물반도체 GaN는 laser diodes (LD) 및 light emitting diodes (LED) 재료로 주목받고있는 주요 전자재료이다. 본 연구에서는 GaN를 chemical vapor deposition (CVD) 법을 이용하여 vapor-liquid-solid (VLS) mechanisum에 의하여 GaN나노와이어 형태로 성장시켰다. 기판은 (001)Si을 사용하였고 suputtering을 이용하여 GaN와 AlN의 double buffer layer (DBL)를 증착시켰으며 촉매로는 Ni을 사용하였다. 또한, 원료로는 고순도 Ga금속과 NH$_3$ gas를, carrier gas로는 Ar을 사용하여 GaN/AlN/(001)Si 위에 GaN 나노와이어를 성장시켰다. 성장된 GaN 나노와이어는 DBL의 두께, Ga source의 양, 튜브 안의 압력, 튜브 안의 위치 등의 제 공정변수에 따라 tangled, straight 등의 다양한 형상을 보였으며 지름은 약 30~100 nm, 길이는 수 $\mu\textrm{m}$로 관찰되었다. GaN나노와이어의 결정성, 형상 및 발광특성 등을 x-ray diffraction (XRD), photoluminesence (PL), scanning electron microscope (SEM), transmision electron microscope (TEM) 등을 이용하여 측정하였으며 제 공정변수와의 상관관계를 규명하였다.