• Journal of Welding and Joining
• /
• v.15 no.5
• /
• pp.64-73
• /
• 1997

Deformations of structures due to welding appear much complicated and deformated modes are also complex. As parameters governing deformations are various and effect of parameters on deformations is not well known, precise prediction of deformation due to welding has been a difficult problem. Until now, many research papers as to welding deformation have been published, but the research results can explain only one aspect of welding deformation have been published, but the research results can explain only one aspect of welding deformation and are hard to be used in reasonable prediction of welding deformations in complicated structures. In this study, based on the accumulated results concerning to welding deformations, a practical method to predict complicated welding deformations of large structure is proposed. A simplified model to estimate residual plastic strains is suggested and main parameters affecting residual plastic strains are shown to be heat input and joint restaints. Inherent strain theory and experimental data are combined with the finite element method and welding deformations of large structures are calculated by elastic analysis. Comparison of calculated results with experimental data shows the accuracy and validity of the proposed method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.303-306
• /
• 2005

The cracking behavior of prestressed concrete members is important for the rational design of prestressed concrete structures. However, the test data on the cracking behavior of prestressed concrete structures are very limited. The purpose of the present study is to investigate the crack spacing and crack width in transversely post-tensioned decks of concrete box girder bridges under applied loading. For this purpose, large scale test members of concrete box girder segments were fabricated and tested. The crack widths, crack spacings and crack patterns were investigated for various load levels. The crack widths and steel strains were continuously monitored during the loading process. To derive a rational predicton equation for crack width, the bond characteristics of post-tensioned steel and nonprestressed rebar in the PSC members were explored first. This was done by measuring the strains of prestressing steel and nonprestressed rebar in the test members under loading. A simple equation for the prediction of maximum crack width in transversely post-tensioned concrete one-way slabs is proposed by considering bond characteristic of prestressing steel and nonprestressed reinforcement. The comparison of proposed equation with experimental data shows good correlation. The present study indicates that ACI and CEB-FIP code equations exhibit rather large deviation from test data on prestressed concrete members.

• The Korean Journal of Mycology
• /
• v.47 no.2
• /
• pp.113-120
• /
• 2019

We isolated endophytic fungal strains from the roots of three medicinal crops, Ligusticum chuanxiong, Angelica gigas, and Cnidium officinale, cultivated at Yeongju, Korea. The fungal strains were identified based on their morphological characteristics and molecular analyses of their internal transcribed spacer, large subunit rDNA, and beta-tubulin regions. Thereby, we identified three previously unrecorded endophytic fungal species, Dactylonectria pauciseptata, Rhizopycnis vagum, and Sistotrema sernanderi, in Korea. In this report, we describe the morphological characteristics and phylogenetic analyses of these three fungal species.

• The Korean Journal of Mycology
• /
• v.48 no.4
• /
• pp.415-421
• /
• 2020

We isolated endophytic fungi from the leaves of woody plants inhabiting the Ulleungdo Island and Yeosu in South Korea. The fungal strains were identified based on their morphological characteristics in conjunction with phylogenetic analysis, which was performed using sequences of the internal transcribed spacer, large subunit rDNA, and β-tubulin DNA. We confirmed the presence of Neofusicoccum mangiferae and Thyronectria cucurbitula, two endophytic fungal species that had not been previously recorded in Korea. In this report, we describe the morphological characteristics of these fungal strains and results of the DNA-based phylogenetic analysis.

• The Korean Journal of Mycology
• /
• v.49 no.1
• /
• pp.81-86
• /
• 2021

We isolated endophytic fungi from Smilax china and Cryptomeria japonica. These fungal strains were identified based on their morphological characteristics and phylogenetic analyses of their internal transcribed spacer, large subunit rDNA, and translation elongation factor 1-α DNA. Among them, we discovered two fungi belonging to the genus Phyllosticta, which have not been previously recorded in Korea. We have described these two fungal strains, Phyllosticta ericarum 19E458 and Phyllosticta philoprina 19E012 in this study.

• Geomechanics and Engineering
• /
• v.32 no.1
• /
• pp.1-20
• /
• 2023

To predict the consolidation behavior of dredged and reclaimed marine clays exhibiting consolidation settlement with large strains, the finite strain consolidation theory must be used. However, challenges in appropriately applying the theory and determining input parameters make design and analysis studies difficult. To address these challenges, design charts for predicting the consolidation settlement of reclaimed marine clays are developed by a numerical approach based on the finite strain consolidation theory. To prepare the design charts, a sensitivity analysis of parameters is performed, and influencing parameters, such as initial void ratio and initial height, as well as the non-linear constitutive void ratio-effective stresspermeability relation, are confirmed. Six representative Korean marine clays obtained from different locations with different liquid limits are used. The design charts for estimating the consolidation times corresponding to various degrees of consolidation are proposed for each of the six representative clays. The consolidation settlements predicted from the design charts are compared to those in previous studies and at an actual construction site and are found to agree well with them. The proposed design charts can therefore be used to solve problems related to the consolidation of reclaimed marine clays having large strains.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.2
• /
• pp.146-151
• /
• 2013

Carbon nanofibers (CNFs) are electrically conductive. When CNFs are used as fillers in resin, this electrical conductivity can be yielded without adversely affecting the mechanical properties of the resin. When an elastomer is adopted as the resin, a conductive elastomer can then be produced. Due to its flexibility and conductive properties, a large strain sensor based on changes in resistivity may be produced, for strain sensing in flexible structures. In this study, a patch-type large strain sensor using resistivity change in a CNF/elastomer composite was proposed. The measurement limits of the sensor were investigated experimentally, and the limit was found to be 40%, which greatly exceeded the limits of conventional metal-foiled strain gages. Also, the proposed CNF/elastomer large strain sensor can be used to measure flexible materials, while conventional strain gages cannot be used to measure such strains.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.33 no.1
• /
• pp.15-23
• /
• 2016

One major constraint in the development and implementation of a successful and cost-effective area-wide integrated pest management (AW-IPM) programme with a SIT component for Bactrocera oleae (Diptera: Tephritidae) is the ability to produce a large number of high quality mass-reared individuals. The aim of this study was to develop a more efficient and practical egg collection system in an attempt to improve the mass-rearing of this species. The following basic parameters were examined: egg production per female, egg hatch, pupal recovery, pupal weight, adult emergence and percentage of fliers. Three different strains (Israel wild-type, France wild-type, and Greece laboratory) were tested and each strain was evaluated for six generations. Female flies of the Israel strain produced significantly more eggs per female than the other two strains, but egg hatch was significantly lower. Egg hatch of the France wild type and the Greece laboratory strain was similar. For all other parameters, there was no significant difference between strains; however, there was a significant generational effect for all parameters observed. As a result of this study, a protocol was developed for the mass-rearing of this species that included the use of large adult holding cages that could house up to 96,000 flies per cage. The newly developed method of egg collection using a flat wax panel as one of the sides of an adult holding cage proved to be cost-effective, efficient, making colony growth easier for industrial mass-rearing.

• Mycobiology
• /
• v.45 no.3
• /
• pp.129-138
• /
• 2017

In this study, we aimed to characterize fungal samples from necrotic lesions on collar regions observed in different sweetpotato growing regions during 2015 and 2016 in Korea. Sclerotia appeared on the root zone soil surface, and white dense mycelia were observed. At the later stages of infection, mother roots quickly rotted, and large areas of the plants were destroyed. The disease occurrence was monitored at 45 and 84 farms, and 11.8% and 6.8% of the land areas were found to be infected in 2015 and 2016, respectively. Fungi were isolated from disease samples, and 36 strains were preserved. Based on the cultural and morphological characteristics of colonies, the isolates resembled the reference strain of Sclerotium rolfsii. Representative strains were identified as S. rolfsii (teleomorph: Athelia rolfsii) based on phylogenetic analysis of the internal transcribed spacer and large subunit genes along with morphological observations. To test the pathogenicity, sweetpotato storage roots were inoculated with different S. rolfsii strains. 'Yulmi' variety displayed the highest disease incidence, whereas 'Pungwonmi' resulted in the least. These findings suggested that morphological characteristics and molecular phylogenetic analysis were useful for identification of S. rolfsii.

• Mycobiology
• /
• v.48 no.6
• /
• pp.450-463
• /
• 2020

The strains 17E-042, 17E-039, and NC13-171 belong to Ascomycota and were isolated from soil collected from Sancheong-gun and Yeongam-gun, Korea. The strain 17E-042 produced white mycelial colonies that developed a sienna color with a round margin on potato dextrose agar (PDA), and the reverse side developed a light sienna color. Morphologically, this strain was similar to the strains of Arthrinium phragmites and A. hydei, but the shorter conidial size of the newly identified strain (17E-042) was distinct. The strain 17E-039 produced macroconidia that were pale yellow to orange-brown, elongated-ellipsoid to oblong, round at both ends, primarily straight but sometimes slightly curved, 0-septate, thin-walled, and filled with numerous droplets, having diameters of 20.4-34.3 × 8.0-12.0 ㎛. And the strain NC13-171 formed hyaline to light brown chlamydospores, solitary or in a chain. Multigene phylogenetic analyses were conducted using sequence data obtained from internal transcribed spacer (ITS) regions, 28S rDNA large subunit (LSU), β-tubulin (TUB2), translation elongation factor 1-alpha (TEF1-α), and RNA polymerase II large subunit (RPB2) genes. The results of molecular phylogeny, the detailed descriptions and illustrations of each species strongly support our proposal that these strains from soil in Korea be designated as Arthrinium minutisporum sp. nov. and two new records of Pezicula neosporulosa and Acrocalymma pterocarpi.