• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.4
• /
• pp.106-117
• /
• 2021

In Korea, interest in truck platooning is increasing because most cargo transportation is done by road. Truck platooning is the operation of two or more trucks in a row to form one platoon, which can increase road capacity and improve fuel efficiency. In this study, to analyze the effect of truck platooning on traffic flow, scenarios were created according to traffic conditions and truck platooning operating conditions. In order to understand the effect of the truck platooning operating conditions, correlation analysis was conducted with the average travel speed, the number of lane change disturbance, and the number of disturbance in the entry/exit section. As a result, the number of trucks in the platoon, the spacing of trucks in the platoon, and the spacing between platoons were found to have an effect on the average speed and the number of lane change disturbance In addition, the truck platooning ratio was found to have a strong correlation with the average travel speed and the number of lane change disturbance regardless of the LOS.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.463-470
• /
• 2015

When a camera installed on a vehicle is used, estimation of the camera pose including tilt, roll, and pan angle with respect to the world coordinate system is important to associate camera coordinates with world coordinates. Previous approaches using huge calibration patterns have the disadvantage that the calibration patterns are costly to make and install. And, previous approaches exploiting multiple vanishing points detected in a single image are not suitable for automotive applications as a scene where multiple vanishing points can be captured by a front camera is hard to find in our daily environment. This paper proposes a camera pose estimation method. It collects multiple images of lane markings while changing the horizontal angle with respect to the markings. One vanishing point, the cross point of the left and right lane marking, is detected in each image, and vanishing line is estimated based on the detected vanishing points. Finally, camera pose is estimated from the vanishing line. The proposed method is based on the fact that planar motion does not change the vanishing line of the plane and the normal vector of the plane can be estimated by the vanishing line. Experiments with large and small tilt and roll angle show that the proposed method outputs accurate estimation results respectively. It is verified by checking the lane markings are up right in the bird's eye view image when the pan angle is compensated.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.129-136
• /
• 2018

In this paper, we propose a new real-time lane detection method that is efficient for road environment. Existing methods have a problem of low reliability under environmental changes. In order to overcome this problem, we emphasize the lane candidate area by using gray level division. And Extracts a straight line component near the lane by using the Hough transform, and generates an ROI for each straight line based on the extracted coordinates. And integrates the generated ROI images. Then, the lane is determined by dividing the object using the dual queue in the ROI image. The proposed method is able to detect lanes even in the environmental change unlike the conventional method. And It is possible to obtain an advantage that the area corresponding to the background such as sky, mountain, etc. is efficiently removed and high reliability is obtained.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.75-85
• /
• 2006

Currently, cross-section design can not reflect highway function and traffic volume, various construction. This research paper provides analysis of traffic accident type, improvement of traffic operation and safety, assessment for new cross-section standards of two-lane highway. Research show higher accident rate on 6$\sim$8.9m road than 9$\sim$12.9m road width in two-lane highway. Typical improvement is widening on lane and shoulder width. Simulation show large increase on 6$\sim$7m road delay-time in 1,200vph. In contrast 10$\sim$11.5m road shows slight change on delay-time. This research paper provides various cross-section construction by traffic volume in minor arterial and distributor two-lane highway. The new cross-section design provides adopting highway volume, various construction and flexibility.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.147-153
• /
• 2020

Conventional lane detection algorithms have problems in that the detection rate is lowered in road environments having a large change in curvature and illumination. The probabilistic Hough transform method has low lane detection rate since it exploits edges and restrictive angles. On the other hand, the method using a sliding window can detect a curved lane as the lane is detected by dividing the image into windows. However, the detection rate of this method is affected by road slopes because it uses affine transformation. In order to detect lanes robustly and avoid obstacles, we propose driving assist system using semantic segmentation based on deep learning. The architecture for segmentation is SegNet based on VGG-16. The semantic image segmentation feature can be used to calculate safety space and predict collisions so that we control a vehicle using adaptive-MPC to avoid objects and keep lanes. Simulation results with CARLA show that the proposed algorithm detects lanes robustly and avoids unknown obstacles in front of vehicle.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.1
• /
• pp.73-83
• /
• 2019

In this paper, we propose the augmented reality(AR) based driving navigation based on robust lane detection method to dynamic environment changes. The proposed technique uses the detected lane position as a marker which is a key element for enhancing driving information. We propose Symmetrical Local Threshold(SLT) algorithm which is able to robustly detect lane to dynamic illumination environment change such as shadows. In addition, by using Morphology operation and Connected Component Analysis(CCA) algorithm, it is possible to minimize noises in the image, and Region Of Interest(ROI) is defined through region division using a straight line passing through several vanishing points We also propose the augmented reality aided visualization method for Interchange(IC) and driving navigation using reference point detection based on the detected lane coordinates inside and outside the ROI. Validation experiments were carried out to assess the accuracy and robustness of the proposed system in vairous environment changes. The average accuracy of the proposed system in daytime, nighttime, rainy day, and cloudy day is 79.3% on 4600 images. The results of the proposed system for AR based IC and driving navigation were also presented. We are hopeful that the proposed research will open a new discussion on AR based driving navigation platforms, and thus, that such efforts will enrich the autonomous vehicle services in the near future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.575-583
• /
• 2017

This paper describes the design and evaluation of a driving mode decision algorithm for automated driving for merge situations on highways. For the development of a highly automated driving control algorithm for merge situations, the driving mode decision is crucial for merging appropriately. There are two driving modes: lane keeping and lane changing (merging). The merge mode decision is determined based on the state of the surrounding vehicles and the remaining length of the merge lane. In the merge mode decision algorithm, merge possibility and the desired merge position are decided to change the lane safely and quickly. A safety driving envelope is defined based on the desired driving mode using the information on the surrounding vehicles' behaviors. To obtain the desired steering angle and longitudinal acceleration for maintaining the subject vehicle in the safe driving envelope, a motion planning controller is designed using model predictive control (MPC), with constraints that are decided considering the vehicle dynamics, safe driving envelope, and actuator limit. The proposed control algorithm has been evaluated via computer simulation studies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.186-195
• /
• 2017

Recently, autonomous vehicles have been studied actively. There are various technologies such as ITS, Connected Car, V2X and ADAS in order to realize such autonomous driving. Among these technologies, it is particularly important to recognize where the vehicle is on the road in order to change the lane and drive to the destination. Generally, it is done through GPS and camera image processing. However, there are limitations on the reliability of the positioning due to shaded areas such as tunnels in the case of GPS, and there are limitations in recognition and positioning according to the state of the road lane and the surrounding environment when performing the camera image processing. In this paper, we propose that LED lights should be installed for autonomous vehicles in tunnels which are shaded area of the GPS. In this paper, we show that it is possible to measure the position of the current lane of the autonomous vehicle by analyzing the color temperature after constructing the tunnel LED lighting simulation environment which illuminates light of different color temperature by lane. Based on the above, this paper proposes a lane positioning technique using tunnel LED lights.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.145-157
• /
• 2004

Microscopic freeway simulation models project the uncertain values of performance measures for subject traffic conditions by explaining drivers' driving behavior with lane changing and car-following models. However, the existing lane changing models are limited to gap acceptance oriented passive behavior of drivers and not able to capture more-or-less aggressive driving behavior(e.g. cut-in lane changing) ordinarily obseved in field. This paper suggests the definition of cut-inlane changing and presents its characteristics based on the findings from two different freeway on- and off-ramp sections. In addition, this paper proposes a new lane changing model capable of handling both passive and active drivers' driving behavior for better performance of simulations. The proposed lane changing model was tested with Hanyang Simulatin (HYTSIM), a microscopic freeway simulation program developed for this study. The HYTSIM simulation results reflecting the performance of the proposed lane changing model were compared against the field data. The test results showed that the distribution of gaps collected when vehicles change lanes were statistically identical to the field data at 95% confidence level.

• International Journal of Automotive Technology
• /
• v.7 no.5
• /
• pp.609-618
• /
• 2006

This paper presents the lateral control of an autonomous vehicle by using a look-ahead sensing system. In look-ahead sensing by an absolute positioning system, a reference lane, constructed by straight lanes or circular lanes, was switched by a segment switching algorithm. To cope with sensor noise and modeling uncertainty, a robust LMI-based $H_{\infty}$ lateral controller was designed by the feedback of lateral offset and yaw angle error at the vehicle look-ahead. In order to verify the safety and the performance of lateral control, a scaled-down vehicle was developed and the location of the vehicle was detected by using an ultrasonic local positioning system. In the mechatronic scaled-down vehicle, the lateral model and parameters are verified and estimated by a J-turn test. For the lane change and reference lane tracking, the lateral controllers are used experimentally. The experimental results show that the $H_{\infty}$ controller is robust and has better performance compared with look-down sensing.