• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.6
• /
• pp.864-870
• /
• 2010

Air embolism can be a lethal complication of surgical procedures during which venous pressure at the site of surgery is sub-atmospheric or air is forced under pressure into a body cavity. To solve the problem, we developed the air detector using relative dielectric constant change, which is expected to be used broadly in industrial circles. We designed air detection system with air control equipment, detection circuit and LabVIEW system for air sensing. In experiments with a mock system, the proposed system showed a signal difference depending on the amount of air in the Tygon tube of the mock system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3C
• /
• pp.183-189
• /
• 2011

The LMS(Least Mean Square) algorithm is generally used because of tenacity, high mating spots and simplicity of realization. But the LMS algorithm has trade-off between nonuniform collect and EMSE(Excess Mean Square Error). To overcome this weakness, variable step size is used widely but it needs a lot of calculation load. In this paper we consider new algorithm, which can reduce calculations and adapt in case of environment changes, uses original signal and noise signal of IGC(Instantaneous Gain Control). For the real time processing of IGC algorithm, we remove the logarithmic function. The performance of proposed algorithm is tested to adaptive noise canceller in automobile. We show implemented LabVIEW FPGA system of IGC algorithm is more efficient than others.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.85-88
• /
• 2011

석유 등 화석연료로 인한 지구온난화 문제와 더불어 일본 대지진 이후 원자력발전의 안전에 의문이 제기 되면서 신재생에너지에 대한 관심이 한층 고조되고 있다. 이에 발맞추어 국가정책으로 녹색성장 정책이 실행됨에 따라 2030년까지 전체 에너지원 중 신에너지전원의 비중을 전체 에너지원의 11%로 확대하는 정책을 적극적으로 추진하고 있다. 따라서 신재생에너지를 통하여 얻은 전기에너지를 저장하여 사용 할 수 있는 2차 전지에 대한 연구가 다수의 산업 현장에서 각광을 받고 있다. 최근 2차 전지는 Smart Grid 및 전기자동차분야에서 폭넓게 사용 되면서 정확한 출력전압, SOC 및 충-방전 예상 시간을 추정하여 2차 전지의 과충전, 과방전으로 인하여 생기는 고장 및 사고를 미연에 방지하고 2차 전지 사용 시 편의성을 제공하기 위한 시스템에 대한 연구가 필요한 실정이다. 본 논문은 이런 실정에 맞추어 LabVIEW 프로그램을 활용하여 2차 전지의 상태를 실시간으로 감시 및 제어하는 프로그램을 제작함으로써, 사고 시 2차 전지에 가해지는 피해 방지 및 관리 시 발생하는 여러 문제점에 대한 효율적인 해결 방안을 제시하고자 한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.3
• /
• pp.229-235
• /
• 2012

This paper dealt with the fabrication of a partial discharge (PD) analyzer for insulation diagnosis of power facilities like transformers, cables and gas-insulated switchgears. An analytic algorithm for the phase (${\phi}$), the magnitude (q), and the pulse count (n) of PD pulse was designed and a time-frequency (TF) map algorithm was applied in the system to eliminate noises by analyzing the time and the frequency component of signals. All the algorithms were operated by a LabView graphical program. The detection circuit consists of a coupling capacitor, a detection impedance, and a low noise amplifier. A plane-plane and a point-plane electrode system were fabricated to simulate different types of insulation defects. In the experiment, we could easily understand the characteristics of PD pulses using the prototype PD analyzer.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.49-53
• /
• 2004

LabVIEW is mostly preferred to use in experiment, measurement and control as one of the useful thing in America and Europe. So, We tried performance experiment of a single-stage closed-type centrifugal pump by using the LabVIEW. The pump rpm and the shaft torque are measured by rpm sensor and torque sensor The test pump's maximum rpm, head, kW are 1,750, 13m, and 1.5kW, respectively The casing is made up with transparency acrylic for confirmation the flow patterns. We installed experimental equipment for air water two phase flow. This paper tries to analyze the single-phase flow characteristics through this air water two phase flow experimental apparatus. The performance results of a single-stage closed-type centrifugal pump satisfied reappearance and coincide well with head and coefficients according to the change of rpm.

• Journal of Power Electronics
• /
• v.14 no.5
• /
• pp.1069-1078
• /
• 2014

This study presents the design and implementation of a web-based remote laboratory for a multi-mode single-leg power converter, which is a topic in advanced power electronics course. The proposed laboratory includes an experimental test rig with a multi-mode single-leg power converter and its driver circuits, a measurement board, a control platform, and a LabVIEW-based user interface program that is operated in the server computer. Given that the proposed web-based remote laboratory is based on client/server architecture, the experimental test rig can be controlled by a client computer with Internet connection and a standard web browser. Although the multi-mode single-leg power converter can work at four different modes (main boost, buck-boost, boost-boost, and battery boost modes), only the buck-boost mode is used in the experiment because of page limit. Users can choose the control structure, control parameters, and reference values, as well as obtain graphical results from the user interface software. Consequently, the feedbacks received from students who conducted remote laboratory studies indicate that the proposed laboratory is a useful tool for both remote and traditional education.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1804-1809
• /
• 2017

A data acquisition (DAQ) system based on oscilloscope was developed and evaluated for radiation detector. The dedicated LabVIEW program that perform the oscilloscope control and the data process was developed. Triggered events for each analog channel were acquired and the output signals were subsequently digitized and recorded for offline processing. Radiation pulse generation circuit was developed to evaluate the intrinsic characteristics of DAQ system. Energy linearity and energy resolution performances were assessed by voltage-peak channels and FWHM obtained from Gaussian fit, respectively. Radiation detector consists of LYSO and GAPD array. The 16 output signals were multiplexed by the RCD networks, and they were fed into the custom-made preamplifiers. Voltage-peak channels was linearly changed as a function of input voltage and the estimated coefficient of determination ($R^2$) was 0.999. No considerable changes in voltage resolution were observed. All 16 crystals were clearly identifiable on the resulting flood image and the mean energy resolution was ~15.1%. This study demonstrated that it is feasible to develop the DAQ system based on oscilloscope and LabVIEW program for radiation detector and the proposed approach offers opportunities to build simple DAQ system in various radiation measurement field.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.283-284
• /
• 2021

The domestic and overseas IoT (Internet of Things)-based automation industry is developing remarkably, and the development of this automation technology is further accelerated by the development of sensor technology. In recent years, the smart farm industry for the purpose of growing crops based on various sensor technologies is rapidly developing. In the case of smart farms, real-time monitoring and mobile services are provided by measuring representative environmental data such as temperature, humidity, and CO2 required for crop cultivation. Most of these environmental monitoring and control operations use the RS-485-based Modbus (RTU) communication method. In this paper, we intend to test the performance of sensor data and actuator information required for smart farm construction by building a platform for controlling sensor data and actuators based on LabView using MQTT (Message Queuing Telemetry Transport), an IoT standard protocol.

• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.9-17
• /
• 2006

The application and analysis of the interaction of various biomaterials including the concentration of biomaterials, thickness, and the ability of the detection of the analytical kinetic data of special biomaterials have been performed by SPR(surface plasmon resonance) sensor. To fabricate the scanning SPR, we designed data acquisition board and LabVIEW program for the personal computer to control the SPR sensor and collect the data from detector.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.127-130
• /
• 2004

This paper describes the design and implementation of a SNMP Agent for NG-SDH transmission system. One of the most important items in SDH network management is the information model that implements every function of SDH equipment at network level. Although the TMN framework of SDH information model has been defined quite well, CMIP constraints of a real implementation urge vendors to implement proprietary features, and make it more difficult to maintain an integrated view of multivendor SDH networks management. To solve these aspects, this work proposes SNMP information model that allows a simple view of NG-SDH network management.