Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Design and Fabrication of a LabView Based Partial Discharge Analyzer

LabView 기반 부분방전 분석장치의 설계 및 제작

  • Cha, Hyeon-Kyu (Division of Electrical and Electronics Engineering, Korea Maritime University) ;
  • Lee, Jung-Yoon (Division of Electrical and Electronics Engineering, Korea Maritime University) ;
  • Park, Dae-Won (Division of Electrical and Electronics Engineering, Korea Maritime University) ;
  • Kil, Gyung-Suk (Division of Electrical and Electronics Engineering, Korea Maritime University)
  • 차현규 (한국해양대학교 전기전자공학부) ;
  • 이정윤 (한국해양대학교 전기전자공학부) ;
  • 박대원 (한국해양대학교 전기전자공학부) ;
  • 길경석 (한국해양대학교 전기전자공학부)
  • Received : 2012.01.02
  • Accepted : 2012.02.20
  • Published : 2012.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper dealt with the fabrication of a partial discharge (PD) analyzer for insulation diagnosis of power facilities like transformers, cables and gas-insulated switchgears. An analytic algorithm for the phase (${\phi}$), the magnitude (q), and the pulse count (n) of PD pulse was designed and a time-frequency (TF) map algorithm was applied in the system to eliminate noises by analyzing the time and the frequency component of signals. All the algorithms were operated by a LabView graphical program. The detection circuit consists of a coupling capacitor, a detection impedance, and a low noise amplifier. A plane-plane and a point-plane electrode system were fabricated to simulate different types of insulation defects. In the experiment, we could easily understand the characteristics of PD pulses using the prototype PD analyzer.

Keywords

References

  1. G. S. Kil, S. W. Kim, D. W. Park, S. J. Kim, and J. M. Song, J. KIEEME, 23, 53 (2010).
  2. H. J. Ju, J. Y. Yoon, and K. S. Han, J. KIEEME, 23, 809 (2010).
  3. T. Leibfried and K. Feser, IEEE International Symposium on Electrical Insulation, 34 (1996).
  4. IEEE Standard 493, IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems, Institute of Electrical and Electronics Engineers (2007).
  5. IEC International Standard 60270, High Voltage Test Techniques-Partial Discharge Measurements, International Electrotechnical Commission, 3rd Ed. (2000).
  6. S. I. Lee and Y. C. Kwon, J. KIEEME, 24, 890 (2011).
  7. Peter H. F. Morshuis, IEEE Trans. Dielectr. Electr. Insul. 12, 905 (2005). https://doi.org/10.1109/TDEI.2005.1522185
  8. Steven A. Boggs, IEEE Elect. Insul. Mag., 6, 33 (1990). https://doi.org/10.1109/57.63057
  9. P. Cichecki, P. Agoris, S. Meijer, E. Gulski, and J. J. Smit, Proc. 15th Int. Symp. High Voltage Engineering, T7 (2007).
  10. K. S. Jung, D. W. Park, H. K. Cha, S. W. Cha, and G. S. Kil, J. KIEEME, 24, 319 (2011).
  11. A. Contin, G. C. Montanari, and A. Cavallini, IEEE Trans. Dielectr. Electr. Insul., 7, 30 (2000). https://doi.org/10.1109/94.839338
  12. A. Cavallini, G. C. Montanari, F. Puletti, and A. Contin, IEEE Trans. Dielectr. Electr. Insul., 12, 203 (2005). https://doi.org/10.1109/TDEI.2005.1430391
  13. A. Contin, A. Cavallini, G. C. Montanari, G. Pasini and F. Puletti, IEEE Transactions Trans. Dielectr. Electr. Insul., 9, 335 (2002). https://doi.org/10.1109/TDEI.2002.1007695
  14. A. Cavallini, M. Conti, A. Contin, and G. C. Montanari, IEEE Trans. Dielectr. Electr. Insul., 10, 528 (2003). https://doi.org/10.1109/TDEI.2003.1207481
  15. A. Cavallini, A. Contin, G. C. Montanari, and F. Puletti, IEEE Trans. Dielectr. Electr. Insul., 10, 216 (2003). https://doi.org/10.1109/TDEI.2003.1194102
  16. F. H. Kreuger, Partial Discharge Detection in High Voltage Equipment (Butterworth, London, 1989).
  17. J. Fuhr, IEEE Trans. Dielectr. Electr. Insul., 12, 1005 (2005). https://doi.org/10.1109/TDEI.2005.1522193