• Journal of Technologic Dentistry
• /
• v.10 no.1
• /
• pp.159-169
• /
• 1988

Fixed prosthetic appliance is the restorations of damaged teeth with cast metal or porcelain, and of replacing missing teeth with fixed, or cemented prosthesis. Successfully treating a patient by means of fixed prosthodontics requires the thoughtful combination of dentist and dental laboratory technician. In order to know the satisfaction of dentisits about fixed prosthetic appliances-porcelain, precious and non precious metal-, this study was conducted for 69 practicing dentisis in Pusan during Fed. to Mar. 1988 using a questionnaire method and was analyzed by the use of percentage, $X^2$-test The results are obtained as follow: 1. General characteristics of the respondents, The rate of age distribution of practcing dentists responded was as follow : 31$\sim$35 age group is 29.0%, 51$\sim$55age group 18.8%, 41$\sim$45 age group and 46$\sim$50 group each 11.6%, 36$\sim$40 age group and 56$\sim$60 age group 8.7%, over 60 age group 7.3%, below 30 age group 4.3% respectively. The tate of term of practice experience distribution of dentists responded was as follow : 6$\sim$10 year group 26.1%, 25$\sim$25year group 18.8%, 11$\sim$15 years group and 16~20 years group each 13.0%, below 5 years group and over 30 years group each 10.2%, 26$\sim$30 years group 8.7% in order. The rate of respondents’ degree was follow : bachelor group 81.2%, doctor group 13.0%, master group 5.8% in order. The rate of respondents’completed medical specialist course was as follow : non-complete group 75.4%, complete group 24.6%. The rate of having own laboratory in respondents’clinic was as follow : no having own laboratory group 58.0%, having own labiratory group 42.0% The rate of being lab. technician in respondent;s clinic was as follow: non-being lab. technician group 91.3%, being lab. technician group 8.7%. The rate of transactional commercial dental lab. numbers was as follow : I dental lab. group 40.6%, 2 dental lab. group 30.4%, 3 dental lab. group 20.3%, production at own lab. group 8.7% 2. Cognitions about the respondent's job, About cognition of patient numvers, there were neither many nor few group 62.3%, few group 17.4%, many group 15.9%, too many group 4.4% in order.(P<.01) As compared with the ratio of dentists to patient prothetic treatment, there were moderate level group 46.4%, high level group 33.6%, low level group 18.8% in order.(P<.01) By job satisfaction of respondents, the highest percentage group was satisfied group 44.9%, neither astisfied nor disstified group 33.3%, dissatisfied group 14.5%, much satisfied group 7.3%(P<.01). As compared with the level of prosthetics price, the were moderate level group 71.0%, low level group 23.2%, high level group 5.8%(P<.01) 3. Satisfaction and assessment of dissatisfied factor of the fixed prosthetic appliance, As compared with the satisfaction of al prosthetic appliance, there were neither satisfied nor dissatisfied group 59.4%, satisfied group 20.3% dissatisfied group 18.8%, much satisfied group 1.5% in order.(P<.01). About precious and non precious metal crown and bridge, there were neither satisfied nor dissatisfied group 60.9%, satisfied group 24.6%, dissatisfied group 11.6%, much satisfied group 2.9% in order.(P<.01) The reat of respondent;s satisfaction about porcelain crown and bridge was as follow : neither satisfied nor dissatisfied group 43.5%, dissatisfied group 33.3%, satisfied group 21.7%, much satisfied group 1.5%(P<.01). The rate of respondent's dissatisfied factor item of precious and non precious metal crown and bridge was as follow : inadequate margin fit item 39.1% respondent, inadequate occlusion item 24.6%, inadequate adaptation item 23.2%, poor anat omic form item 15.9%, inadequate contact item 31.9%, improper polishing item 4.4%, the rest item 11.6% respectively. The rate of respondent's dissatisfied factor item of porcelain crown and bridge was as follow : inadequate margin fit item 52.2%, inadequate occlusion item 2.9%, inadequate adaptation item 10.1%, poor anatomic form item 11.6%, improper polishing item 1.5%, shade mismatching item 71%, the rest item 7.2% respectively. The rate of cognition of respondents’ about cause of dissatisfied factor on fixed prosthetic appliance by item was as follow : deficiency of sincerity item 55.1%, deficiency of knowledge about work item 47.8%, deficiency of experience item 15.9%, poor quality of using material item 5.8%, the rest item 2.9% respectively.

• Journal of Technologic Dentistry
• /
• v.32 no.2
• /
• pp.91-102
• /
• 2010

Purpose : The purpose of study was 500 people who are not related to dentistry in order to survey image about dental technicians. Methods : The subjects were composed of 500 people who are not related in Daegu Metropolitan city. This study was done using the Statistical Package for Social Sciences 17.0 for Windows. As for the analysis methods, the study used the frequency analysis, percentage, mean, t-test, analysis of variance. Results : The score on the image of dental technicians declined in the order of occupational image(2.98), work image(3.14), personal image(3.26), social image(2.87). 'It is hard and stressful' in the occupational image had the highest score with 3.69, 'Dentist and companionship are strong' in the occupational image had the lowest score with 2.21. 'It need expert knowledge and a skilled technology' in the work image had the highest score with 3.69, 'Health medical treatment side of health technique is occupation.' in the work image had the lowest score with 3.69. 'It always work busily' in the personal image had the highest score with 3.69, 'It is value and is effect work.' in the personal image had the lowest score with 3.69. 'An employment is easy after license acquisition.' in the social image had the highest score with 3.69, 'It admit independence' in the social image had the lowest score with 3.69. Conclusion : Dental technition research in order to image improvement and recognition, as the medical professional must construct the desirable dental technition image and recognition.

• Journal of Technologic Dentistry
• /
• v.36 no.1
• /
• pp.27-37
• /
• 2014

Purpose: The purpose of this study is to investigate the improvement measure of dental technicians practical examination system. Methods: The subjects in this study were 290 dental technicians who were self-written questionnaire. The results were analyzed by SPSS 16.0. The collected data was analyzed by frequency and chi-square test. Results: Dental technician practical exam feasibility of survey were largely negative views. Articulators work required in practical exam as a tool used (28.7%), electric wax carver (19.5%), heating clear (17.8%), handpiece (16.2%) had a response. Dental Technician positions in accordance with practical exam in comparison to satisfaction, the professor is satisfied, but the clinical dental technicians were generally dissatisfied (p<0.05). Conclusion: Based on the results of this study, Current is necessary to analyze the practical test. It also should be compared with foreign institutions. Long-term and short-term improvement examination system that can be applied to the improvement of the dental technician to draw practical test it is necessary to improve the system.

• Journal of The Korean Association For Science Education
• /
• v.32 no.1
• /
• pp.64-81
• /
• 2012

The purpose of this study was to analyse middle school students' images and perceptions about scientist, technician and engineer and to compare the images of male students with those of female students. Fralick et al.(2009)'s "Draw a scientist at work and draw an engineer at work" was modified and administered to 110 middle school 3rd grade students (43 male students, 67 female students) from 5 middle schools. They drew the figures at work and took explanation of what the person was doing in a drawing. The results of this study were as follows; First, the representative image of scientist was the man with glasses and lab gown performing the chemical experiment. There were no significant differences between the male students and female students in terms of the scientist images. Second, the representative image of technician was the man who was fixing a car and working with his hands. The technicians were illustrated as working with tools such as wrench, hammer and so on. There were no significant differences between the male students and female students in terms of the technician images. Third, the students involved in this study frequently perceived male engineers as working indoors. But perceptions about performance of engineers were significantly different between male students and female students. A majority of male students recognized that engineers should design, invent and create the products, however many female students perceived the engineers as car mechanics. Fourth, the students perceived differently the scientists' task compared with the technicians', but they had difficulty in distinguishing the scientists' task from the engineers' task.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.173-185
• /
• 2020

Purpose: The purpose of this study was to investigate dental technicians' awareness of infections and to enhance their interest and commitment towards infection prevention. Methods: A self-reported questionnaire survey was conducted among dental technicians. Total of 195 responses were used for analysis. A cross-tabulation analysis was used to compare dental technicians' awareness of infections according to their levels of education on infection prevention (α=0.05). Results: Dental technicians were educated on infection prevention (40.5%). Most participants received infection prevention education from school (29.8%). Dental laboratories had an infection control guideline (34.9%). Dental technicians were not aware of infection risks at their workplaces or believed that they were not at risk of infections at their workplaces (59.3%). Conclusion: Dental technicians must be consistently educated on infection prevention and control through systematic education at school and wider promotion through media. Research is needed to economically and efficiently improve equipment used by dental technicians and to protect them from infectious diseases. A budget for infection prevention must also be determined. Institutional measures such as providing support for dental technicians at the policy level and developing a basic infection prevention manual are necessary. Solving these issues not only protects dental technicians from infections but also allows them to provide high-quality medical services.

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.97-107
• /
• 2008

Objectives; The purpose of the present study is to investigate the difference in levels of satisfaction between dental laboratory owners and employed dental technicians in the area of dental laboratory management. Methods; The samples of seventy-one dental laboratory owners and sixty-six employed dental technicians were selected in a blinded and random manner. Data was collected through self-administered questionnaires and analyzed using average values, the t-test and multiple regression. Results; 1) There was no significant difference in the average values of general satisfaction levels related to dental laboratory management between dental lab owners and employees. 2) The average values of satisfaction levels in 11 specific items scored 'above average' among dental lab owners and 'average' among employees. 3) The average values of satisfaction levels in 10 specific items except for 'trust and respect' showed a significant difference between dental lab owners and employees. 4) Important factors which influenced the satisfaction level of dental lab owners were 'trust and respect' and 'improvement of employee's benefits'. In the employees group, 'trust and respect', 'improvement of employee's benefits' and 'technical information support' were important factors. Conclusion; The present study revealed that dental laboratory owners and employees have some gaps between the viewpoints in dental laboratory management. This suggests the necessity to improve management in a transparent and economical way. However this study has some limitation in that the sample size was not massive enough.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.105-111
• /
• 2012

Purpose: The purpose this study was to evaluate the marginal fitness of metal copings fabricated using rapid prototyping method and to compare the fitness with copings by conventional method. Then clinical availability of fixed dental prostheses (FDPs) fabricated using rapid prototyping method shall be confirmed based on marginal fitness. Methods: Ten same cases of3 unit FDPs epoxy models (abutment teeth 14 and 16) were manufactured. Each of ten epoxy models were scanned by 3shape D-700 scanner to be designed by experienced technician, and photopolymer 3 unit FDPs were fabricated using rapid prototyping methodand fabricated using Lost wax technique (LW) with same models. Marginal fitness of 3 unit FDPs were measured by silicone replica technique. T-test of independent sample for statistical analysis was executed with SPSS 12.0K for Windows. (${\alpha}$=.05) Results: Significantly higher mean (SD) marginal fitness (P<.000) were observed in the RP group $(95.9(18.0){\mu}m$ compared to the conventionally LW group $(80.1(13.8){\mu}m$. Conclusion: Marginal fitness of LW group showed excellent rather than RP group. However marginal fitness of 3 unit FDPs fabricated by RP method did not get out of clinical allowance value range significantly to allow clinical application.

• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.143-159
• /
• 2006

Objectives; The purpose of the present study is to investigate workplace satisfaction level of dental technicians and the differences between that of dental lab owner's and that of employed dental technicians, who are working in dental laboratories. Methods; Samples were comprised of 137 dental technicians working in dental laboratories. Data were collected through self-administered questionnaires and analyzed to frequency distribution, correlation, t-test and multiple regression analysis. Results; 1) Dental technicians generally are 'somewhat or a bit satisfied' with their workplace situations, regardless of position, sex, and individual career. 2) Mean values of 4 items out of 11 work situation factors of employed dental technicians were significantly lower than those of lab owner's. The 4 items are the openness of management, working environment, pay, and policy in promotion and raise. They would be sources of dissatisfaction and conflict. 3) Level of satisfaction was significantly correlated with 2 subordinate variables, i.e. working conditions and administration policy. There is a tendency that administration policy is a bit more important for lab owners, while working conditions are a bit more important for employed dental technicians. Conclusion; The employer-employee relationship of dental technicians seems to be sound, as no signs of troublesome problem is detected. But the discrepancy revealed in the above results is telling that there certainly exist some disagreement in the viewpoints of the two groups. It is necessary for the dental technicians to find ways to deal with the possible triggers of discord and discontent.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.17 no.1
• /
• pp.23-30
• /
• 2008

Application of CAD/CAM is changing the way partial or full veneer all ceramic restoration is made. CAD/CAM systems, which were used mainly in other industries, have been developed and introduced for the dental purposes recently. It produced a flood of information on the CAD/CAM systems. It also influenced the development of restorative materials and all ceramic is substituting the traditional restorative materials of gold, composite resin and metal. Price increase of gold and other raw materials made the all ceramic more appealing. The introduction of a CEREC 3D system was innovative in several ways. Image of the prepared tooth is captured by camera and impression taking is unnecessary. Restoration can be delivered to the patient on one appointment and it will satisfy the demand of busy patients. One-day treatment with direct CAD/CAM system saves time compared to indirect CAD/CAM system. More superior restoration can be produced if lab work such as the adaptability check and shade selection is cooperated with lab technician. Short working time and comparably superior shade compatibility of color block was close to ideal. In the future, restorations with better quality can be fabricated in less time to busy patients thanks to the development of CAD/CAM system and dental materials.

• The Journal of the Korean dental association
• /
• v.51 no.5
• /
• pp.255-264
• /
• 2013

Many concept of occlusion have been introduced in the past, but there isn't any generally accepted unified theory since a single occlusion theory cannot represent the natural perfection, especially considering the difference in clinical experience, the dynamic occlusion, and individual diversity in mastication pattern. NAT(Naturgemasse Aufwachstechnik)/NFR((Natur Funktionsgerechte Rekonstruktion) occlusion is not just a theory on occlusion, but a clinical occlusion that can be practically applied to clinical practice by providing dynamic occlusion adjusted to the individual mastication pattern and biomechanics. This report aims to provide a guide to a clinically biomechanical occlusion through the teamwork of both the dentist and the lab technician by introducing the NAT occlusion through following: reviewing the concept of occlusion in terms of morphology, its correlation with NAT/NFR occlusion, reviewing the limitation of conventional occlusion theories, and introducing the clinical application of NAT/NFR.