• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.5
• /
• pp.8-15
• /
• 2011

LTE-Advanced aims at peak data rates of 1Gbits/s for the downlink and 500 Mbits/s for the uplink, which can be accomplished only by using wide spectrum allocation of 100MHz as well as advanced multiple input multiple output antenna techniques to the uplink. This paper analyzes the uplink precoding techniques which include LTE codebook of downlink, singular value decomposition codebook, and equal gain transmission codebook over LTE defined single carrier frequency division multiplexing systems. Finally considering nonlinear transmit power amplifier model, it is shown that link-level performance of EGT is superior to those of any other precoding schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.3
• /
• pp.158-160
• /
• 2014

Recently, owing to the development of active array antenna techniques, various sector beams can be applied to the LTE systems with vertical sectorization. In this paper, we evaluate the system performance and suggest an optimum beam combination and parameters by using a system level simulator

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.14-18
• /
• 2010

The future of communication systems is expected to combine with the terrestrial and satellite networks. A commonality between wireless interfaces is important consideration for cost of user equipment in the integrated satellite and the terrestrial system. Because IMT-Advanced system take into account LTE based on the terrestrial system for the next generation of communication, a study of the LTE-based satellite system is especially required. A frame of the existing terrestrial wireless networks is designed to use for a random access up to the maximum cell radius of 100 km. However, the random access scheme for the terrestrial system cannot be used in the satellite system, because the satellite systems generally have large coverage than the terrestrial system. Therefore, we propose that the efficient random access procedure to reduce latency and complexity for the satellite system maintaining commonality with the terrestrial system in this paper.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.9
• /
• pp.1398-1405
• /
• 2015

Domestic railway communication in Korea has been introduced for mutual communications among control center, operation staffs, and maintenance staffs. It has been mainly used as railway disaster and safety functions from VHF and UHF from 1980’s and TRS-Astro and TRS-Tetra from the 2000’s. Recently for urban railways communications, 18GHz and 2.4GHz ranges have been utilized for image transmissions and control command communications, respectively. This paper analyzes technical development of LTE-R, LTE communication for Railways, that has been designed as a single integrated railway wireless network in order to merge the current various communication systems. In this paper, we present the details of the examination of the LTE-R test-bed using 2.6GHz test frequency in Daebul test line through CW test and optimization test.

• Journal of Venture Innovation
• /
• v.2 no.1
• /
• pp.13-21
• /
• 2019

In LTE environment, which is 4th generation mobile communication systems, there is concern about private information exposure by transmitting initial identifier in plain text. This paper suggest mutual authentication protocol, which uses one-time password utilizing challenge-response and AES-based Milenage key generation algorithm, as solution for safe initial identification communication, preventing unique identification information leaking. Milenage key generation algorithm has been used in LTE Security protocol for generating Cipher key, Integrity key, Message Authentication Code. Performance analysis evaluates the suitability of LTE Security protocol and LTE network by comparing LTE Security protocol with proposed protocol about algorithm operation count and Latency.Thus, this paper figures out initial identification communication's weak points of currently used LTE security protocol and complements in accordance with traditional protocol. So, it can be applied for traditional LTE communication on account of providing additional confidentiality to initial identifier.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.805-814
• /
• 2012

Intermittent or periodic signals with undulating amplitudes of mobile devices cause interference noise at audible frequency to the sound system which is installed nearby. In this regard, it is recently issued that the intermittently transmissions of LTE mobile phones cause the interference noises with sound systems, similar to that of GSM mobile phones. For retaining the immunity to noises, a national regulation KN20 suggests a 1 kHz AM 80 % and a CDMA modulation signal as reference signals for immunity test of sound and television broadcast receiver. In this paper, the effects of interference noises of AM and CDMA are compared with those of GSM and LTE, and the improvement of reference signal for national immunity test of sound systems is suggested. It is recommended to delete the CDMA modulation signal from reference signals for immunity test because it hardly cause interference noise with sound systems. On the other hand, it is desirable to select the modulation signal of LTE instead of CDMA as a reference signal for immunity test of sound system and television broadcast receiver because many people use the LTE service and it is analysed that the LTE signal causes considerable interference noises.

• Journal of Integrative Natural Science
• /
• v.11 no.4
• /
• pp.197-203
• /
• 2018

Long Term Evolution-Advanced (LTE-A) is the next drive in the broadband mobile communication, which allows operators to improve networks performance and service capabilities. LTE-A targets the peak data rates of 1Gbps in the downlink and 500Mbps in the uplink. This requirement is only fulfilled by a transmission bandwidth of up to 100MHz. However the accessibility of such large part of the contiguous spectrum is uncommon in practice. Therefore LTE-A uses some new features on top of the existing LTE standards to provide very high data rate transmission. Some of the most significant features introduced in LTE-A are carrier aggregation, heterogeneous network enhancement, coordinated multipoint transmission and reception, enhanced multiple input and multiple output, and development relay nodes with universal frequency reuse. This review paper presents an overview of the above mentioned LTE-A key features and functionalities. Based on this review, in the conclusion we discuss the current technical challenges for future broadband mobile communication systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6838-6844
• /
• 2014

3GPP LTE-Advanced systems adopt multiple antennas for high speed data transmission. In general, the receiver complexity of a spatially mutiplexed (SM) multiple-input multiple-output (MIMO) system grows in proportion to the number of candidate vectors. A large number of candidate vectors increases the reliability of the soft output values. The maximum likelihood (ML) signal detection with a large number of candidate vectors achieves high performance. On the other hand, low complexity receiver techniques with a small number of candidate vectors provide soft output values, such as low reliability. This paper addresses the improving reliability of the soft output obtained from a small number of candidate vectors. The improved performance of the proposed technique with the aid of computer simulations is reported.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.77-85
• /
• 2015

This paper presents our performance evaluation after the way of minimizing waiting times between channel switching for eMBMS(evolved Multimedia Broadcast/Multicast Services) technique in LTE-Advanced systems. Existing composition of MBMS using IGMP(Internet Group Management Protocol) transfers the data with Multicast from BM-SC(Broadcast Multicast Service Center) to eNB(evolevd Node B) and with Broadcast from eNB to UE(User Equipment). Therefore, in case of channel switching, IGMP Join report should be transferred to BM-SC and then wait user's contents to be retransferred from eNB. To achieve this, Subscriber Channel technique of priorities is used for minimizing waiting times between channel switching as UE broadcasts favorite channels in advance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.2
• /
• pp.50-56
• /
• 2014

This paper describes the design, fabrication, and measurement of a 4-port femtocell MIMO antenna for LTE 700MHz(Band12, 13, 14, 17, 28, 44) applications. Based on microstrip patch antenna, an impedance matching is achieved by short pin. In order to obtain sufficient bandwidth and isolation between antenna elements in a limited dimension, a cross decoupler is used. With a Voltage Standing Wave Ratio (VSWR)${\leq}2$, the measured result of the fabricated antenna provides 105MHz(0.698~0.803MHZ) bandwidth and shows the gain with 1.97dBi and isolation above 13dB. As one of the key parameters for MIMO performance evaluation, correlation coefficient of MIMO is achieved within 0.2.