열가소성 수지인 폴리프로필렌 (PP)과 무기나노입자인 몬모릴로나이트 (MMT)의 나노복합재료에 할로젠 계열의 난연제 데카브로모다이페닐옥사이드 (DBDPO)와 클로로파라핀 왁스 (CPW)를 철가하였을 때의 난연특성 향상에 대해 실험하였다. 고분자 수지의 난연특성은 난연제의 첨가뿐만 아니라 나노복합화를 통해서도 향상될 수 있는데, 콘 칼로리미터와 한계산소지수 (LOI)의 측정을 통하여 난연제와 무기나노입자의 함량에 따른 폴리프로필렌/몬모릴로나이트 나노복합재료의 난연특성을 정량적으로 측정하였다. 폴리프로필렌에 난연제 DBDPO와 CPW를 첨가하였을 때, 난연특성이 2배 이상 향상되는 것을 관찰하였으며, CPW가 DBDPO보다 약간 우수한 난연특성을 보였다. 한계산소지수 측정결과 폴리프로필렌에 난연제를 첨가하면 폴리프로필렌의 연소특성이 가연성 영역 (LOI<19)에서 난연성 영역 (LOI>20)으로 전이됨을 확인하였다. 특히, 폴리프로필렌에 몬모릴로나이트를 첨가하여 나노복합화를 하였을 때의 난연특성이 3배 이상 향상되었는데, 이로부터 난연제를 단순히 혼합하는 것보다 몬모릴로나이트를 나노복합화한 후 난연제를 첨가하는 것이 난연특성의 향상에 휠씬 유리하였다.
고분자 물질의 화재 위험성 및 화재시 인명 피해의 감소를 위한 기초자료로 제시하고자 점토질의 첨가에 의한 난연성 평가를 수행하였다. 본 연구에서는 에폭시 수지의 난연성 향상과 연기의 발생량을 감소시키기 위하여 점토질의 montmorillonite(MMT)와 같은 천연 물질을 삽입하여 연소 특성을 살펴보았다. 이 연구를 위하여 한계산소지수(limiting oxygen index, LOI), 탄화층 생성량(char yield), 연기 밀도(smoke density) 측정 둥의 난연성 실험을 실시하였다. Epoxy/MMT의 복합재료는 MMT의 농도가 증가할수록 한계산소지수 및 탄화층 생성량이 증가하여 난연성이 향상되었으나 연기 밀도는 오히려 증가하는 결과를 나타내었다.
영구적 난연성기를 함유한 에폭시 수지를 얻기 위하여, 본 연구에서는 디하이드록시를 함유한 인 화합물[10-(2,5-dihydroxyphenyl)-9,10-dihydro-9-oxa-10-phospha phenanthrene-10-oxide, DOPO-HQ]과 디하이드록시를 함유한 실리콘 화합물(polydimethylsiloxane, hydroxyl terminated, PDMS)를 경화하지 않은 에폭시 프리폴리머(diglycidyl ether of bisphenol A, DGEBA)와 반응시킨 다음, 경화제(4,4-diaminodiphenylmethane, DDM)를 사용하여 경화반응 시킨 에폭시 수지를 제조하였다. 제조된 에폭시 수지의 각종 특성을 적외선 분광분석기(FTIR), 시차주사열량기(DSC), 열중량 분석기(TGA), 한계산소지수(LOI)/수직 연소 시험(UL 94-V test), 인장 및 충격 시험을 이용하여 분석하였다. 그리고 사용한 인 및 실리콘 화합물의 함량이 에폭시 경화물의 열적/기계적 성질 및 난연성에 미치는 영향을 조사하였다. 인 및 실리콘 성분이 함유된 에폭시 수지의 열적 및 기계적 물성이 단순 에폭시 수지의 물성에 비교하여 크게 향상되었다는 것을 알 수 있었다. 그리고 인 및 실리콘을 함유한 모든 에폭시 수지는 29.9 ~ 31.8%의 LOI 및 V-0 수준의 UL 94-V로 난연성 기준(LOI: 30% 이상, UL 94-V: V-0)을 통과한 반면, 단순 에폭시 수지는 LOI: 21.4% 및 UL 94-V: no rating으로 난연성 기준에 크게 못 미치는 것을 알 수 있었다.
한국의 실내장식재로는 대부분 벽지를 사용하고 있다. 이러한 주거공간에 화재발생시 화재 확대요인중의 하나는 벽지의 연소를 통해 이루어진다. 그동안 산소지수 관련연구들이 많이 이루어져 왔지만 상온에서의 연구가 많았다. 본 연구에서는 실내화재에서 화재의 확대요인이 될 수 있는 벽지의 산소지수가 상온과 고온에서 얼마나 차이가 발생하며 이러한 차이가 화재확대에 미치는 영향을 고찰하고자 하였다. 실험을 통해 LOI 및 TOI 측정한 결과 벽지의 상온과 고온에서의 산소지수는 $5{\sim}8%$정도의 차이가 나타났다. 실험에서 산소지수 0.1%의 차이로도 연소 길이에 현저한 차이가 나타나기 때문에 고온에서의 산소지수 감소가 화재확대에 큰 영향을 미치는 요인임을 알 수 있었다.
주거 건축 및 가구산업의 자재로써 합성목재(Wood-Plastic Composites)는 점차 각광받고 있다. 본 연구에서는 합성목재의 연소특성을 살펴보기 위하여 한계산소지수 측정(ASTM D 2863) 및 콘칼로리미터 시험(ISO 5660-1)을 실시하였으며 또한 일반목재인 적송과 방부 처리를 한 방부목에 대하여도 동일한 시험을 통하여 합성목재와의 연소특성을 비교.검토하였다. 한계산소지수 측정결과 합성목재가 적송 및 방부목에 비해 낮게 측정되었다. 콘칼로리미터 시험결과 합성목재의 열방출률이 가장 높았고 또한, 최대 열방출률 및 평균 열방출률, 총 방출열량도 적송 및 방부목에 비해 높게 나타났다.
In this work, properties of ABS/AES blends were investigated. Blends were prepared by casting from THF. The thermal stability, light resistance, storage modulus and flame retardancy were measured by thermogravimetric analysis, cole. difference in Fade-o-meter, Rheovibron, and limiting oxygen index(LOI). The thermal stability, light resistance and storage modulus increased with increasing contents of AES. ABS and AES showed similar LOI. The LOI of the ABS/AES blends increased with rising contents of AES but all the blends were found to be flammable. It was observed that ABS and AES was incompatible from the morphology by scanning electron microscope(SEM).
The flame retardancy by the addition of clay was evaluated to present as the fundamental data to decrease the fire hazard of polymers and life losses. The flame retardancy was examined to increase flame retardancy and to decrease smoke yield of epoxy by the addition of clay such as montmorillonite. For this study, the experiments of flame retardancy were conducted as follows : the measurement of the limiting oxygen index(LOI), char yield, and smoke density. As MMT concentration increased, epoxy/MMT composite increased LOI and char yield with the decreased smoke density.
Olefinic compatibilized blend(R-PP/R-PE)/layered silicate composites have been prepared by melt intercalation technique directed from $Na^{+}$ montmorillonite(MMT) or organophilic montmorillonites while using magnesium hydroxide as flame retardant. Morphology and flammability properties were characterized by X-ray diffraction(XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM), thermogravimetry analysis(TGA), limiting oxygen index(LOI), UL94 test. It is found that the compatibilized blend/layered silicate(Cloisite 20A) nanocomposites have a mixed immiscible-intercalated structure and there is better intercalation when a compatibilizer is combined with the polymer and layered silicate to be melt blended. A very large increase in the LOI value was observed with hybrid filler addition and further enhancement in thermal stability and compatibility of blend was obtained for the compatibilized blend containing small amount of layered silicate.
The purpose of this study was to examine effects of combustion retardation for paper filter impregnated metal salts by measurement of extinguishing concentration, CO concentration, and limiting oxygen index(LOI, ASTM D 2863). And thermal stability analysis using DSC was carried out. In case of extinguishing concentration, $NH_4H_2PO_4$ showed excellent effect of combustion retardation. The result of LOI measurement showed that metal salts possessed good effect of combustion retardation. And thermal analysis using DSC showed that these metal salts possessed thermal stability. In case of CO concentration, CO concentration was increasing because of imperfect combustion process due to combustion retardation effect of metal salts.
본 연구에서는 범용 열가소성 수지인 폴리프로필렌 (virgin polypropylene, VPP)과 폴리프로필렌을 주성분으로 하는 재생플라스틱의 난연성을 향상시키기 위하여, 난연제 decabromodiphenyl oxide (DBDPO)와 chlorinated paraffin wax (CPW)를 혼합하여 이것들의 난연 특성을 정량적으로 비교 분석 연구하였다. 난연성 평가 측정으로 콘 칼로리미터 (cone calorimeter, ASTM E1354, ISO 5660), 한계산소지수 측정 (LOI, ASTM D2863, ISO 4589) 등을 사용하였고, 콘 칼로리미터를 이용하여 DBDPO와 CPW의 난연효율을 정량적으로 측정하였다. 콘 칼로리미터의 결과로 난연제의 난연효율을 측정한 결과, DBDPO가 CPW보다는 약 2배의 난연효율을 가지고 있다는 것을 확인하였고, 한계산소지수 측정 결과와 유사한 난연효율을 보임을 확인하였다. 열중량 분석 (TGA) 측정결과 난연제 DBDPO를 첨가하였을 때 약 30~5$0^{\circ}C$의 열분해 온도의 상승을 확인할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.