• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.3
• /
• pp.103-111
• /
• 2014

This study analyzed effects of packaging materials and storage temperature on the shelf-life of Korean grinded yam. For experimental measurement, experimental groups were used $PET(12{\mu}m)/Al(9{\mu}m)/LLDPE(60{\mu}m)$ as opaque barrier packaging material and $PET(12{\mu}m)/PE(20{\mu}m)/VM-PET(12{\mu}m)/PE(25{\mu}m$) and barrier $NY(15{\mu}m)/LLDPE(60{\mu}m$) as transparent barrier packaging material. Control group were used normal $NY(15{\mu}m)/LLDPE(65{\mu}m)$. The grinded yam stored at refrigeration temperature ($5^{\circ}C$) and room temperature ($20^{\circ}C$C) for 8 days. Changes in color, pH, viscosity, microorganisms and sensory characteristics were measured. In the grinded yam L and ${\Delta}E$ value were not changed rapidly at refrigeration temperature. However L and ${\Delta}E$ were rapidly changed in all of packaging materials at room temperature. In two temperature condition, pH and viscosity were decreased during storage but pH was increased at $5^{\circ}C$ after 4 days. PET/Al/LLDPE and PET/PE/VM-PET/PE inhibited the growth of microorganisms effectively. PET/AL/LLDPE which is a high barrier packaging material showed the best in two temperature condition.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.125-130
• /
• 2006

In order to study the storage stability of winter date (Zizyphus jujuba Miller) with functional MA film storage, linear low density polyethylene $(LLDPE,\;30{\mu}m\;and\;60{\mu}m)$ film packaging and non-packaging were compared $30{\mu}m$ LLDPE packaging, $60{\mu}m$ LLDPE packaging and non-packaging samples were stored at $0^{\circ}C,\;8^{\circ}C$ (low temperature) and $25^{\circ}C$(room temperature) for 10 weeks. Weight loss of $30{\mu}m$ LLDPE packaging, $60{\mu}m$ LLDPE packaging and non-packaging in room temperature were decreased by 3.6% 0.4% and 36.1% respectively. Titratable acidity showed the trend of similarity in all treatment during the storage conditions, and especially LLDPE film packaging showed higher than non-packaging in the last storage. Soluble solids showed an increase in non-packaging, a decrease in LDPE film packaging highly. Vitamin C content showed the trend of decrease in all treatments, but non-packed jujubes sustained higher than LLDPE film packaging.

• Korean journal of food and cookery science
• /
• v.19 no.4
• /
• pp.439-446
• /
• 2003

This study was performed to investigate the change in the chemical components of red pepper powder using different packaging materials and various storage conditions. Red pepper powders with 11 and 15% initial moisture content were packed with five different materials and stored at different temperatures (0, 20, and 30 C) for a one year period. Over the storage period, each combination was periodically sampled, and examined for composition changes. The five packaging materials were: linear low density polyethylene(LLDPE), nylon/LLDPE(Ny/LLDPE), saran coated ethylene vinyl acetate copolymer/linear low density polyethylene(B650), nylon/Tie/nylon/ethylene-vinyl alcohol copolymer/nylon/Tie/LLDPE(RDX-2787) and oriented polypropylene/alumimum/LLDPE(OPP/Al/LLDPE), and the three storage conditions were (28.3${\pm}$1.0)$^{\circ}C$ with (15.5${\pm}$2.8)% relative humidity, (18.6${\pm}$0.5)$^{\circ}C$ with (46.6${\pm}$4.9)% RH, and (0${\pm}$2)$^{\circ}C$ with (80${\pm}$10)% RH, respectively. The moisture contents of all samples changed according to the relative storage humidity, except those of the samples packed with OPP/Al/LLDPE, which remained constant throughout the storage period. The capsaicinoids content of the red pepper powder did not change significantly for 6 months, but gradually decreased after that until about 85% of the original amount remained at the final stage of storage. The ASTA color values of all samples decreased gradually throughout the storage period. The higher the storage temperature, the more severe the deterioration. The color deterioration seemed greatly related to the existence of oxygen, as the deterioration was especially severe in the samples packed with LLDPE and B650, where the oxygen transmission rate were highest among the five packaging materials.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.163-171
• /
• 2017

Effects of different packaging methods for maintaining the shelf life and postharvest quality of iceberg lettuce (Lactuca sativa L.) were studied after harvesting in summer season. Lettuce heads were packaged in plastic crate with or without different films such as (A) Individual lettuce head sealed packaging with linear low density polyethylene (LLDPE) film; (B) Packaging lettuce head in plastic crate and wrapped with LLDPE film; (C): Individual lettuce head sealed packaging with perforated high density polyethylene (HDPE) film; (D) Packaging lettuce head in plastic crate and wrapped with perforated HDPE; and (E) Packaging lettuce head in plastic crate without any film (control), and stored at $2^{\circ}C$ for 35 days. Several quality parameters such as fresh weight loss, SPAD (soil & plant analyzer development) meter value, respiration rate, moisture content and appearance of lettuce were investigated. The lettuce wrapped with individually-sealed LLDPE film showed the lowest weight loss and the highest SPAD value rendering the best appearance index among the treataments throughout the three-week storage period at $2^{\circ}C$. Extending the freshness of iceberg lettuce during low temperature storage will definitely increase the salability potential in the domestic market even during summer season.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.41-48
• /
• 2018

A printable time temperature integrator (TTI) consisting of oxygen indicator and cover films with various oxygen permeability was developed. The printing ink contained methylene blue (oxygen indicator) which changed in color during storage. $TiO_2$ and glycerol for UV-activation of TTI and zein and ethanol for printing performance were also contained in the printing ink. The cover film on the ink was employed to control the color change rate and temperature dependency (Arrhenius activation energy, $E_a$) by using the different films (PE, PET, OPP, and LLDPE). The film properties were varied by annealing. TTI was produced by silk screen printing. As a result, the color change rates were different for the cover films, being the highest in TTI with LLDPE, followed by OPP, PE, and PET. The rate decreased with increase in the cover film thickness. The $E_a$ was the highest in TTI with LLDPE, followed by OPP, PE, and PET. The $E_a$ did not change with the cover film thickness. The annealed PVC and PET film were lower in oxygen permeability than the unannealed ones, indicating the lower color change rate.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.1 no.1
• /
• pp.20-28
• /
• 1995

The conditions of Soxhlet extraction and HPLC analysis were examined for the determination of antioxidants used for polyolefins manufacturing. The extraction with methylene chloride in a Soxhlet apparatus for 10 hours and above provides almost complete recovery of the additives from polyolefins. The determination of the antioxidants including BHT, Irganox 1076, Irganox 1010 and Irgafos 168 could be successfully performed by using reversed-phase HPLC under gradient elution where the baseline separation of all four antioxidants in a single run was possible. In addition, the antioxidants inherently contained in commercial LLDPE and OPP films were identified and quantitatively determined.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.16 no.2_3
• /
• pp.59-65
• /
• 2010

Starch was modified with epichlorohydrin(ECH) to improve the miscibility with LDPE and LLDPE. Native starch or epichlorohydrin treated starch was mixed with grycerol and LDPE/LLDPE resin using a kneader and extruded using a single screw extruder to make pallets. The pallets were compression-molded at 145 into composite boards to evaluate their color, oxygen permeation, mechanical and thermal properties, and degradability under UV irradiation. Sheets with epichlorohydrin treated starch generally showed higher L-value than that of native starch blend sheets. The hunter b-values in both native starch blends and epichlorohydrin treated starch blends increased with Increasing starch contents. Tensile strength and percent elongation of sheets decreased with increasing starch contents. Tensile strength and percent elongation of sheets decreased with increasing starch contents. The degradability of blends under UV radiation increased with increasing starch contents in both blend types. The results represents that crosslinking of starch with epichlorohydrin may be a good method to improve miscibility of starch with petroleum-based materials.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.530-537
• /
• 2014

Moisture is a major factor causing the deteriorative physical change, microbial growth, and chemical reaction of the products. In this study, the moisture absorbing composite films have been prepared with moisture absorbing material of polyacrylic acid partial sodium salt (PAPSS) impregnated on LLDPE polymer for the functional packaging applications. The results showed that PAPSS impregnated film illustrated uniformly dispersed PAPSS particles in the LLDPE polymer matrix. The transparency of the PAPSS impregnated film decreased slightly at higher PAPSS concentrations. An increase in the PAPSS content for moisture-absorbing films showed a similar decrease in tensile strength, percent elongation at break, and tear strength. Their values of films impregnated with PAPSS of 0.5, 1, and 2% showed no significant difference. Meanwhile, 4% PAPSS films significantly decreased the values of mechanical properties compared to the films impregnated with different PAPSS levels. Values of the oxygen permeability and water vapor permeability for PAPSS impregnated films decreased significantly with greater PAPSS. The results indicate that 4% PAPSS impregnated in LLDPE films had high affinity of moisture absorbencies compared to the other films. The mathematical equation that best described the moisture sorption isotherm of each film sample was the GAB equation at $25^{\circ}C$. The crystallization and melting temperatures of PAPSS films were influenced by the addition of PAPSS material, but showed good thermal stability.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.103-106
• /
• 2016

This survey was performed by Kasetsart University Department of Packaging and Materials Technology on Food Packaging Industry in Thailand, was to conduct on the status and trends of food packaging industry to obtain the information on the plastic of packaging materials in food packaging in Thailand. The survey conducted by field visits, questionnaires, interviews and personal communication as well as published data from different sources. The ration of plastic consumption among the industries, packaging is showed 49%, textile 15% and construction 11% respectively. Numbers of company among packaging industry, film processing company is 503, injection molding is 231, blow molding is 216. Production volume of PP, HDPE, LLDPE and LDPE is 1,950 mil. ton, 1,920 mil. ton, 1,150 mil. ton and 685 mil. ton, respectively. Import of plastic 16,668 mil. baht and export is 33,778 mil. baht. Plastic consumption is plastic bottle and flexible pouch, mainly being used in beverage industry. The past decade as it has been replaced by flexible pouches and aseptic cartons in Thailand.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.16 no.2_3
• /
• pp.53-58
• /
• 2010

Internal gas composition of single unit persimmon package was evaluated at $-1^{\circ}C$ as function of package film area and fruit weight in order to find packaging conditions to achieve the optimal modified atmosphere beneficial for keeping the freshness. With large fruit size(${\approx}230\;g$), low permeable films (LLDPE/PP in 35 or $40\;{\mu}m$ thickness and $30\;{\mu}m$ OPP) with an exact fitness to the fruit (surface area of $0.040\;m^2$) resulted in anaerobic atmosphere with occurrence of browning in long term storage. With medium (${\approx}210\;g$) and medium small (${\approx}190g$) sizes, larger surface area of low permeable $35\;{\mu}m$ LLDPE/PP film provided higher $O_2$ and lower $CO_2$ concentrations causing higher occurrence of softening and blackening discoloration. On the other hand, smaller surface area of lower $O_2$ and higher $CO_2$ concentrations had a high risk of browning. Wise combination of fruit size, packaging film and surface area is required for attaining the beneficial modified atmosphere to prevent the physiological injuries.