• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.38-42
• /
• 2018

Continuous efforts are being made to improve the efficiency of Si solar cells, which is the prevailing technology at this time. As opposed to the standard front-lit solar cell design, the back-lit design suffers no shading loss because all the metal electrodes are placed on one side close to the pn junction, which is referred to as the front side, and the incoming light enters the denuded back side. In this study, a systematic comparison between the two designs was conducted by means of computer simulation. Medici, a two-dimensional semiconductor device simulation tool, was utilized for this purpose. The $0.6{\mu}m$ wavelength, the peak value for the AM-1.5 illumination, was chosen for the incident photons, and the minority-carrier recombination lifetime (${\tau}$), a key indicator of the Si substrate quality, was the main variable in the simulation on a p-type $150{\mu}m$ thick Si substrate. Qualitatively, minority-carrier recombination affected the short circuit current (Isc) but not the opencircuit voltage (Voc). The latter was most affected by series resistance associated with the electrode locations. Quantitatively, when ${\tau}{\leq}500{\mu}s$, the simulation yielded the solar cell power outputs of $20.7mW{\cdot}cm^{-2}$ and $18.6mW{\cdot}cm^{-2}$, respectively, for the front-lit and back-lit cells, a reasonable 10 % difference. However, when ${\tau}$ < $500{\mu}s$, the difference was 20 % or more, making the back-lit design less than competitive. We concluded that the back-lit design, despite its inherent benefits, is not suitable for a broad range of Si solar cells but may only be applicable in the high-end cells where float-zone (FZ) or magnetic Czochralski (MCZ) Si crystals of the highest quality are used as the substrate.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.2
• /
• pp.3420-3429
• /
• 1974

This study was performed to estimate the daily water consumption for watering livestock and home use, and to organize the water systems in the rural districts of Korea. For these purposes, 560 farms and other 40 urban families were randomly chosen and investigated about their water systems and daily water consumption seasonally from July 20 to August 31, 1973, and other 82 livestock raisers' useful data for watering livestock helped the study to assess the consumption of livestock water and compare it to that of general farms which bred some domestic animals as their sidelines. The results of data showed that the daily consumption of water was varied with the difference of districts and seasons in which the investigations were conducted. The results were summarized as follows. 1. The mean consumption of water for home use was varied with the range of 30.2-48.7 lit./day in summer and 22.4-45.2 lit./day per a person, respectively, in the rural districts, which showed that the water consumption in summer was more than in autumn. 2. The mean consumption of livestock water in the general farms approached to about 15.8-37.1 lit./day per cattle, 3.87-16.45 lit./day per a pig, and 0.19-1.03 lit./day per chicken, but it was slightly reduced in autumn; 10.89-37.09 lit./day per cattle, 3.87-12.63 lit./day per a pig, and 0.06-0.94 lit./day per chicken. The ratio of livestock water consumption to home use amounted to the range of 10-25%. 3. The mean consumption of livestock water used at the livestock raisers amounted to 134 lit./day per dairy cow, 67.4 lit./day per cattle, 43.29 lit./day per a horse, 13.24 lit./day per a pig, 0.438 lit./day per a layer, and 0.177 lit./day per a broiler, which showed that the daily water consumption for larger livestock was about two times as much as the farms, but it was approximately of the same for small ones. 4. The factors affecting the amount of water consumption for home use were statistically analyzed to find the kind of water sources and the class of water systems by the factorial arrangement method to the fundamental experimental unit, Suwon area of 100 of families, in which the former was very significant while the latter was significant. However, the standard of living and their interactions were not significant. 5. Almost 83.24% of the sampled farms used some kinds of wells as their water sources, of which 32.06% was of hard water, and of which 11.l% or 2.6% contained much of iron or organice materials, respectively, examining them by a simple technique of sensibility, 6. The resulting chart of the farm water systems was summarized as Fig. IV-6. Observating the safe distance from contamination sources, the ratio of 42.4% of sampled farms whose water sources were wells, confronted highly to the danger of contamination to their water sources. And other dangerous sources of contamination such as toilets, stalls, and compost heaps were situated nearly to the water sources, and most of them were able to make their spoiled water infiltrated into the ground. Thereafter, it was recommended to develop some protecting methods and to install some suitable faculties to clean water.

• English & American cultural studies
• /
• v.18 no.1
• /
• pp.53-92
• /
• 2018

This essay aims to examine chick lit written within the Asian American context. For the most part, the chick lit genre has been typically regarded as a site to study contemporary white women's experiences and to debate the genres' credentials as feminist literature. Though some may disagree, there is general consensus that chick lit has fallen out of vogue after reaching its peak in the first decade of the new millenium.; nevertheless, it is being revisited by readers and critics alike as it has recently re-emerged as a location upon which to examine how race and gender inform notions of national belonging and female subject formation in the twenty-first century. To this end, this essay reads Kim Wong Keltner's The Dim Sum of All Things (2004). Keltner's protagonist Lindsey Owyang is yet another twentysomething "chick" looking for love, self, independence, and success in the huge megalopolis of San Francisco. What sets Lindsey apart from the chick prototype is that she is a third-generation ABC (American-born Chinese) and issues relevant to Asian America frequently make their way into Lindsey's narrative. Though it is generally considered as standing a "few notches above the standard chick-lit fare" (Stover n. pag), I would argue that meaningful reflections on many of the major pillars of Asian American literature, history, and cultural politics are glossed over in favor of cursory musings about the daily vicissitudes of Lindsey's life. This essay thus takes to task Ferriss's claim that a "serious" consideration of chick lit "brings into focus many of the issues facing contemporary women and contemporary culture - issues of identity, of race and class, of femininity and feminism, of consumerism and self-image" (2). I contend that a close examination of Keltner's The Dim Sum of All Things discloses that the chick lit format undermines a "serious consideration" of Asian American issues by presenting in particular a highly problematic representation of race and of Asian American femininity.

• Journal of Chest Surgery
• /
• v.39 no.8 s.265
• /
• pp.579-587
• /
• 2006

Background: Preoperative risk analysis for Fontan candidates is still less than optimal in that patients with apparently low risks may have poor surgical outcome; prolonged pleural drainage, protein losing enteropathy, pulmonary thromboembolism and death. We hypothesized that low pulmonary vascular compliance (PVC) is a risk factor for prolonged pleural effusion drainage after the Fontan operation. Material and Method: A retrospective review of 96 consecutive patients who underwent the Extracardiac Fontan procedures (median age: 3.9 years) was performed. Fontan risk score (FRS) was calculated from 12 categorized preoperative anatomic and physiologic variables. PVC $(mm^2/m^2{\cdot}mmHg)$ was defined as pulmonary artery index $(mm^2/m^2)$ divided by total pulmonary resistance $(W.U{\cdot}/m^2)$ and pulmonary blood flow $(L/min/m^2)$ based on the electrical circuit analogue of the pulmonary circulation. Chest tube indwelling time was log-transformed (log indwelling time, LIT) to fit normal distribution, and the relationship between preoperative predictors and LIT was analyzed by multiple linear regression. Result: Preoperative PVC, chest tube indwelling time and LIT ranged from 6 to 94.8 $mm^2/mmHg/m^2$ (median: 24.8), 3 to 268 days (median: 20 days), and 1.1 to 5.6 (mean: 2.9, standard deviation: 0.8), respectively. FRS, PVC, cardiopulmonary bypass time (CPB) and central venous pressure at postoperative 12 hours were correlated with LIT by univariable analyses. By multiple linear regression, PVC (p=0.0018) and CPB (p=0.0024) independently predicted LIT, explaining 21.7% of the variation. The regression equation was LIT=2.74-0.0158 PVC+0.00658 CPB. Conclusion: Low pulmonary vascular compliance is an important risk factor for prolonged pleural effusion drainage after the extracardiac Fontan procedure.

• Journal of Genetic Medicine
• /
• v.7 no.2
• /
• pp.133-137
• /
• 2010

Purpose: Beckwith-Wiedemann syndrome (BWS) is an overgrowth malformation syndrome caused by a methylation abnormality at chromosome 11p15, consisting of two imprinting centers, BWSIC1 (IGF2, H19) and BWSIC2 (LIT1, KvDMR). This study evaluated the applicability of a methylation-specific (MS) PCR RFLP method for the genetic diagnosis of BWS. Materials and Methods: A total of 12 patients were recruited based on clinical findings. Karyotyping was performed using peripheral blood leukocytes, and genomic DNA was treated with bisulfate and amplified using methylation-specific primers. RFLP was conducted with restriction enzymes in differentially methylated regions of LIT1, H19, and IGF2. Results: The 12 BWS patients had normal karyotypes. Abnormal methylation patterns in the BWSIC2 (LIT1) region were identified in seven patients (58.3%) using the MS-PCR RFLP method. Conclusions: The MS-PCR RFLP method is a simple, economical genetic test. It detected genetic abnormalities in 50-60% of BWS patients, suggesting that it can be used as a screening test. A more precise method is required, however, to enhance the detection rate of genetic abnormalities, especially in BWSIC1 region.

• Genomics & Informatics
• /
• v.19 no.3
• /
• pp.23.1-23.7
• /
• 2021

Currently, coronavirus disease 2019 (COVID-19) literature has been increasing dramatically, and the increased text amount make it possible to perform large scale text mining and knowledge discovery. Therefore, curation of these texts becomes a crucial issue for Bio-medical Natural Language Processing (BioNLP) community, so as to retrieve the important information about the mechanism of COVID-19. PubAnnotation is an aligned annotation system which provides an efficient platform for biological curators to upload their annotations or merge other external annotations. Inspired by the integration among multiple useful COVID-19 annotations, we merged three annotations resources to LitCovid data set, and constructed a cross-annotated corpus, LitCovid-AGAC. This corpus consists of 12 labels including Mutation, Species, Gene, Disease from PubTator, GO, CHEBI from OGER, Var, MPA, CPA, NegReg, PosReg, Reg from AGAC, upon 50,018 COVID-19 abstracts in LitCovid. Contain sufficient abundant information being possible to unveil the hidden knowledge in the pathological mechanism of COVID-19.

• Transactions of the Society of Information Storage Systems
• /
• v.9 no.1
• /
• pp.10-16
• /
• 2013

Through the rapid development of LED TV, a large-area edge-lit backlight unit is widely researched in the display industry for enhancing the optical efficiency, luminous uniformity and slim design. In addition, an edge-lit backlight unit includes many optical sheets such as reflection sheet, prism sheet and diffuser sheet. However the function can be replaced by the carefully patterned light guide plate (LGP). Micro patterns which located on the top and bottom surface of light guide plate was designed by ray-tracing optical simulation. The designed patterns improved the light characteristics of LGP, including optical extraction efficiency and intensity distribution uniformity. These results suggest that it is very effective method to design edge-lit LGP with micro-patterns on both sides for large-area display and to reduce the fabrication cost.

• Korean Journal of Materials Research
• /
• v.27 no.2
• /
• pp.107-112
• /
• 2017

The BCBJ (Back Contact and Back Junction) or back-lit solar cell design eliminates shading loss by placing the pn junction and metal electrode contacts all on one side that faces away from the sun. However, as the electron-hole generation sites now are located very far from the pn junction, loss by minority-carrier recombination can be a significant issue. Utilizing Medici, a 2-dimensional semiconductor device simulation tool, the interdependency between the substrate thickness and the minority-carrier recombination lifetime was studied in terms of how these factors affect the solar cell power output. Qualitatively speaking, the results indicate that a very high quality substrate with a long recombination lifetime is needed to maintain the maximum power generation. The quantitative value of the recombination lifetime of minority-carriers, i.e., electrons in p-type substrates, required in the BCBJ cell is about one order of magnitude longer than that in the front-lit cell, i.e., $5{\times}10^{-4}sec$ vs. $5{\times}10^{-5}sec$. Regardless of substrate thickness up to $150{\mu}m$, the power output in the BCBJ cell stays at nearly the maximum value of about $1.8{\times}10^{-2}W{\cdot}cm^{-2}$, or $18mW{\cdot}cm^{-2}$, as long as the recombination lifetime is $5{\times}10^{-4}s$ or longer. The output power, however, declines steeply to as low as $10mW{\cdot}cm^{-2}$ when the recombination lifetime becomes significantly shorter than $5{\times}10^{-4}sec$. Substrate thinning is found to be not as effective as in the front-lit case in stemming the decline in the output power. In view of these results, for BCBJ applications, the substrate needs to be only mono-crystalline Si of very high quality. This bars the use of poly-crystalline Si, which is gaining wider acceptance in standard front-lit solar cells.

• Journal of the Optical Society of Korea
• /
• v.12 no.1
• /
• pp.25-30
• /
• 2008

The optical performances of 15-inch edge-lit backlight were simulated by using a Monte Carlo ray-tracing technique. The backlight model was built by combining a wedge-type light guide plate, a diffuser sheet, a tubular fluorescent lamp with a lamp reflector, and two crossed prism sheets. Angular distributions of the luminance on each optical component obtained from simulation were consistent with those obtained from experiments on a real 15-inch backlight. The constructed backlight model was used to evaluate the optical performances of a micro-pyramid film. It was found that the on-axis luminance gain on the pyramid film is higher than that on one prism film but much lower than that on the two crossed prism films. These results suggest that a reliable simulation model can be used to develop new hybrid films and to optimize the optical structure of edge-lit backlight in order to reduce the developmental period.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.669-700
• /
• 2019

Farmers' band music is a religious ritual in Korea. It is a solemn ritual to exhibit the auspicious holiness of the people to the God. Most of the ritual is accomplished by music. The music of the farmers 'band, in this sense, has its meaning as the expression of holiness by sound. In this paper, I will explore the principle to make various rhythms of farmers' band music, especially focusing on the chaegut (lit. "stroke music"). It is very symbolic because the name of the music shows the strokes of the gong, called jing, in a rhythmic phrase. In this sense, the chaegut is man-made music based on the specific principles in accordance with the strokes of the gong. Among many chaegut rhythms, samchae (lit. "three strokes") to chilchae (lit. "seven strokes") are the main rhythms. They were made after the principle of 'forward with drums, backward with gongs' in Five way procession. It the basic principle of military procession from the early Joseon Dynasty. The procession follows with the sound of the drums and gongs. There was always a principle of "five strokes" to control the procession. The "five strokes" became the basis of the making of chaegut rhythms. The rhythms of the samchae to chilchae are based on the rhythm of samchae. The samchae has three gong strokes in a cycle, which exhibits the chaotic moment with the rhythmic noise. The name of the rhythm exhibits the correspondence of the signifiant, that is the name "three strokes" and the signifié, that is the real three strokes of gongs in music. Other four rhythms has made up from the samchae with half cycles are added in accordance with the strokes of the gongs. In this way, the chaegut shows the principle of "five strokes" in the military procession. The rhythm of ochae jilgut is a mixture of ochae (lit. "five strokes") and jilgut (lit. "road music") which is usually performed on the road to a mountain shrine. The musical structure of ochae jilgut corresponds to the colotomic structure of Southeast Asian music and the 15th-century music of old musical scores. The rhythm of gilgunak chilchae is a mixture of gilgunak (lit. "road military music") and chilchae (lit. "seven strokes"). The rhythmic structure is similar to other regional music, sijo ("short song") of the literati music and norae garak (lit. "some melody") of the shaman music. In sum, the chaegut is very artistic music made from the military procession of the Joseon Dynasty. The name of the rhythm corresponds with the strokes of the gong in a cycle. In this way, the chaegut shows the principle of music-making to exhibit the ritual characteristics of the Korean people.