• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.421-424
• /
• 2007

Thermal behavior of $Li_{1-x}CoO_2$ has been investigated employing DSC (Differential Scanning calorimetry) and TGA (Thermogravimetry Analyzer), and the crystal parameters were calculated from XRD (X-ray diffraction).for the commercial rectangular pouch cell(1000 mAh).The cathode materials coated over aluminium foil current collector is made up of a blend consisting of active material $LiCoO_2$(size $20\;{\mu}m$, 94 wt%), conducting material super p black (SPB, 3 wt%) and binder polyvinylidene fluoride (PVDF, 3 wt%). The anode is a mix consisting of carbon (92 wt%) and PVDF(8 wt%) coated over copper foil. The cells for the experiments were first preconditioned by cycling three times and stabilized at OCV=3.0, 3.5, 4.2, 4.35 and 4.5 V. The stabilized cathode material was used for thermal and crystal parameter investigations.

• 한국통신학회논문지
• /
• 제19권9호
• /
• pp.1782-1792
• /
• 1994

$Ti:LiNbO_3$채널형 광도파로와 Asymmetric Coplanar Strip(ACPS) 전극구조를 이용해서, $1.3{\mu}m$에서 동작하는 진형파형 위상 광변조기를 설계, 제작한 다음 변조특성을 관찰하였다. 위상정합이 개선되도록 ACPS 진행파형 전극을 설계하기 위해서 전극과 완충박막의 두께를 포함하여, 전극제원의 해석적 함수로 특성저항, 변조파의 유효굴절률 및 전극손실 등을 고려하였다. Ti 확산방법으로 저손실 채널형 광도파로 제작하였으며, double-spin image reversal 공정을 이용해서 $2.5{\mu}m$ 두께의 전극을 형성하였다. 9GHz 부근에서의 전극구조 공진형상 때문에 변조특성이 제한 되었지만, 2.5GHz 까지는 큰 왜곡없이 변조특성이 관찰되었다.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.306-311
• /
• 2000

The purpose of this study is to research and develop solid polymer electrolyte(SPE) for Li polymer battery. The temperature dependence of conductivity impedance spectroscopy and electrochemical properties of PDF/PAN electrolytes as a function of a mixed ratio were reported for PVDF/PAN based polymer electrolyte films which were prepared by thermal gellification method of preweighed PVDF/PAN plasticizer and Li salt. The conductivity of PVDF/PAN electrolytes was 10$\^$-3/S/cm. 20PVDF5PEN LiCiO$\_$4//PC$\_$10//EC$\_$10/ electrolyte has the better conductivity compared to others. 20PVDF5PANLICIO$\_$4//PC$\_$10//EC$\_$10/ electroylte remains stable up to 5V vs. Li/Li$\^$+/. Steady state current method and ac impedance were used for the determination of transference numbers in PVDF/PAN electrolyte film. The transference number of 20PVDF5PANLiCO$\^$4//PC$\_$10//EC$\_$10/ electrolyte is 0.48.

• 한국추진공학회지
• /
• 제17권5호
• /
• pp.18-26
• /
• 2013

AP 기반의 혼합형 열가소성 고체 추진제의 연소 억제 방안과 그 효과를 제시하였다. 입자 사이즈가 다른 AP를 적용한 효과와 0.5%~2.0%의 LiF가 미치는 영향을 분석하기 위해 PEBAX/AP 열가소성 고체 추진제에 대한 지상연소 시험을 통해 연소속도 및 압력 지수를 산출한 후 비교 분석하였다. 분석결과, 큰 AP 입자 사이즈를 적용하는 것과 2.0% 이내의 LiF 첨가는 연소속도를 감소시키는 효과를 보였으며 본 논문에서는 이에 대한 각각의 영향을 정량적으로 제시하였다.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.466-472
• /
• 2000

As cathode materials of LiMn2O4-based lithium-ion secondary batteries, Li(Mn1-$\delta$M$\delta$)2O4 (M=Ni and Co, $\delta$=0, 0.05, 0.1 and 0.2) materials which Co and Ni are substituted for Mn, were syntehsized by the solid state reaction at 80$0^{\circ}C$ for 48 hours. No second phases were formed in Li(Mn1-$\delta$M$\delta$)2O4 system with substitution of Co. However, substitution of Ni caued to form a second phase of NiO when its composition exceeded over 0.2 of $\delta$ in Li(Mn1-$\delta$M$\delta$)2O4. As the results of charging-discharging test, the maximum capacity of Li(Mn1-$\delta$M$\delta$)2O4 appeared in $\delta$=0.1 for both Co and Ni. Also, Li(Mn1-$\delta$M$\delta$)2O4 electrode showed higher capacity and better cycle performance than LiMn2O4.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.143-146
• /
• 1998

The $LiCoO_2$ powder was synthesized at >$700^{\circ}C$, >$850^{\circ}C$ by solution route. In this paper, we investigated X-ray diffraction, and charge-discharge performance for $LiCoO_2$/Li and $LiCoO_2$/MPCF cell. The $LiCoO_2$/Li ceSl exhibited a high avmge discharge potential of 38-3% and a good cycle life performance at 5(hnA/g during chargedischarge cycling between 43-3.0V. And, the $LiCoO_2$MPCF cell showed a high average discharge voltage of 3.6-3.W and a excellent cycle life prfomam during chargedischarge cycling b&wm 4 2-2.W. As a result, the $LiCoO_2$ powdm syd-eizd by solution route is a good cathode material for lithium ion secondary battery.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.439-440
• /
• 2007

To enhance the electron injection from the cathode of organic light-emitting diodes (OLEDs), We have studied characteristics of device that electron injection layer(EIL) is inserted between emissive layer and cathode. We fabricated bi-layer cathode $Li_2O$(x nm)/Al(100nm) and LiF(x nm)/Al(100nm) using LiF and $Li_2O$ as an electron injection layer. We analyzed the current efficiency, luminance efficiency, and external quantum efficiency of the device by varying the thickness of $Li_2O$ and LiF to be 0.5nm, 1nm, or 3nm. Using the EIL, we have obtained the efficiency of 7cd/A and the luminance of $20,000cd/m^2$. There is an improvement of efficiency by more than 3 times than the device without the $Li_2O$ layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.262-262
• /
• 2009

최근 리튬이차전지가 전지자동차, hybrid car, PHEV, Ev, UPS 저장장치로 사용되기 시작함에 따라 고용량화, 고출력화가 요구되고 있다. 현재까지 주로 사용 되어왔던 carbon으로는 작동전압이 낮고, 고용량화, 고출력화가 어려워 금속산화물, 금속 비정질 금속 및 금속산화물을 carbon과 혼합 사용 함으로써 차세대 전지로서 특성을 달성하고 있다. 따라서 본 연구에서는 음극 소재로서 안정성이 뛰어난 금속산화물로 $Li_4Ti_5O_{12}$를 합성할 때 저가의 $TiCl_4$를 이용 $Li_4Ti_5O_{12}$가 고밀도를 갖게끔 $TiCl_4$를 이용 구형의 Ti-precursor(전구체)를 합성한 후 구형의 $Li_4Ti_5O_{12}$를 합성하였다. Ti전구체는 $TiCl_4$로부터 합성하였는데 이때 구형을 제조하고자 Hydroxypropyl cellulose(이하 HPC)를 사용하여 반응을 진행하였다. 이때 반응 조건 및 HPC의 몰수 변화에 따른 입자 형상의 변화에 관하여 관찰한 결과, $TiOCl_2$ 0.4mol, 반응온도 $10^{\circ}C$, 유지시간 6시간, HPC양 0.02mol일 때 $0.6{\mu}m$ 정도의 구형 Ti-전구체를 합성하였다. 합성된 Ti-전구체와 리튬수화물을 사용하여 $Li_4Ti_5O_{12}$를 합성 하였고, 상기 물질로 전지특성을 평가하였다.

• 한국전기전자재료학회논문지
• /
• 제32권6호
• /
• pp.437-443
• /
• 2019

All-solid-state thin-film lithium-ion batteries are important in the development of next-generation energy storage devices with high energy density. However, thin-film batteries have many challenges in their manufacturing procedure. This is because there are many factors, such as substrate selection, to consider when producing the thin film multilayer structure. In this study, we compare the fabrication and performance of all-solid-state thin-film lithium-ion batteries with a $LiNi_{0.5}Mn_{1.5}O_4$ cathode/LiPON solid electrolyte/$Li_4Ti_5O_{12}$ anode structure using stainless steel and Si substrates with different surface roughness. We demonstrate that the smoother the surface of the substrate, the thinner the thickness of the all-solid-state thin-film lithium-ion battery that can be made, and as a result, the corresponding electrochemical characteristics can be improved.

• 한국분말재료학회지
• /
• 제21권5호
• /
• pp.331-337
• /
• 2014

The effects of particle size of Li-Si alloy and LiCl-KCl addition as a binder phase for raw material of anode were investigated on the formability of the thermal battery anode. The formability was evaluated with respect to filling density, tap density, compaction density, spring-back and compressive strength. With increasing particle size of Li-Si alloy powder, densities increased while spring-back and compressive strength decreased. Since the small spring-back is beneficial to avoiding breakage of pressed compacts, larger particles might be more suitable for anode forming. The increasing amount of LiCl-KCl binder phase contributed to reducing spring-back, improving the formability of anode powder too. The control of particle size also seems to be helpful to get double pressed pellets, which consisted of two layer of anode and electrolyte.