• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.443-449
• /
• 2007

The structural and thermal stability of $Li[Co_{0.1}Ni_{0.15}Li_{0.2}Mn_{0.55}]O_2$ electrode during cycling process was studied. The sample was prepared by simple combustion method. Although there were irreversible changes on the initial cycle, O3 stacking for $Li[Co_{0.1}Ni_{0.15}Li_{0.2}Mn_{0.55}]O_2$ structure was retained during the first and subsequent cycling process. Impedance of the test cell was decreased after the first charge-discharge process, which would be of benefit to intercalation and deintercalation of lithium ion on subsequent cycling. As expected, cycling test for 75 times increased impedance of the cell a little, instead, thermal stability of $Li[Co_{0.1}Ni_{0.15}Li_{0.2}Mn_{0.55}]O_2$ was improved. Moreover, based on DSC analysis, the initial exothermic peak was shifted to high temperature range and the amount of heat was also decreased after cycling test, which displayed that thermal stability was not deteriorated during cycling.

• Journal of Electrochemical Science and Technology
• /
• 제3권2호
• /
• pp.63-67
• /
• 2012

We prepared various $LiNi_{0.8}Co_{0.15}Al_{0.05}O_2-LiFePO_4$ mixed-cathode electrodes by changing the content of $LiNi_{0.8}Co_{0.15}Al_{0.05}O_2$ and $LiFePO_4$ used, and we analyzed the electrochemical characteristics of the cathodes. We found that the reversible specific capacity of the cathodes increased and that the capacity retention ratios of the cathodes decreased during cycling as the content of $LiNi_{0.8}Co_{0.15}Al_{0.05}O_2$ increased. Conversely, we found that although the reversible specific capacity of the cathodes decreased because of the material composition, the cycle property of the cathodes increased when the $LiFePO_4$ content increased. We analyzed the thermal stability of the $LiNi_{0.8}Co_{0.15}Al_{0.05}O_2-LiFePO_4$ mixed-material cathodes by differential scanning calorimetry and found that it increased as the $LiFePO_4$ content increased.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.101-106
• /
• 2017

$Li_2SiO_3$ was used as a coating material to improve the electrochemical performance of $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$. $Li_2SiO_3$ is not only a stable oxide but also an ionic conductor and can, therefore, facilitate the movement of lithium ions at the cathode/electrolyte interface. The surface of the $Li_2SiO_3$-coated $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ was covered with island-type $Li_2SiO_3$ particles, and the coating process did not affect the structural integrity of the $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ powder. The $Li_2SiO_3$ coating improved the discharge capacity and rate capability; moreover, the $Li_2SiO_3$-coated electrodes showed reduced impedance values. The surface of the lithium-ion battery cathode is typically attacked by the HF-containing electrolyte, which forms an undesired surface layer that hinders the movement of lithium ions and electrons. However, the $Li_2SiO_3$ coating layer can prevent the undesired side reactions between the cathode surface and the electrolyte, thus enhancing the rate capability and discharge capacity. The thermal stability of $Li[Ni_{0.8}Co_{0.15}Al_{0.05}]O_2$ was also improved by the $Li_2SiO_3$ coating.

• Journal of Electrochemical Science and Technology
• /
• 제5권3호
• /
• pp.87-93
• /
• 2014

The fluorine-substituted $0.3Li_2MnO_3{\cdot}0.7Li[Mn_{0.60}Ni_{0.25}Co_{0.15}]O_{2-x}F_x$ cathode materials were synthesized by using the transition metal precursor, $LiOH{\cdot}H_2O$ and LiF. This was to facilitate the movement of lithium ions by forming more compact SEI layer and to reduce the dissolution of transition metals. The $0.3Li_2MnO_3{\cdot}0.7Li[Mn_{0.60}Ni_{0.25}Co_{0.15}]O_{2-x}F_x$ cathode material was sphere-shaped and each secondary particle had $10{\sim}15{\mu}m$ in size. The fluorine-substituted cathodes initially delivered low discharge capacity, but it gradually increased until 50th charge-discharge cycles. These results indicated that fluorine substitution gave positive effects on the structural stabilization and resistance reduction in materials.

• 마이크로전자및패키징학회지
• /
• 제10권2호
• /
• pp.13-17
• /
• 2003

본 연구에서는 $ZnWO_4-LiF$계를 이용하여 RF모듈 구현을 위한 새로운 조성의 LTCC 소재를 개발하고자 하였다. 순수 $ZnWO_4$의 경우 98% 이상의 상대밀도를 얻기 위해서는 $1050^{\circ}C$이상의 소결온도가 필요하였고 소결체의 고주파유전특성은 유전율($\epsilon_r$) 15.5, 품질계수($Q{\times}f0$) 74000 GHz, 공진주파수 온도계수$(\tau_f)-70ppm/^{\circ}C$이었다. $ZnWO_4$에 LiF의 첨가는 상호 반응에 의해 $810^{\circ}C$ 부근에서 액상을 형성하였고 따라서 0.5에서 1.5 wt%의 LiF의 첨가로 $ZnWO_4$를 $820^{\circ}C$에서 치밀화를 얻을 수 있었다. 주어진 LiF의 첨가범위에서 소결 수축률은 LiF 량의 증가와 함께 증가하였다. LiF의 첨가는 LiF 자체의 낮은 유전율에 의해 유전율을 15.5에서 14.2∼15의 범위로 감소시켰으며 품질계수($Q{\times}f0$)도 LiF와 $ZnWO_4$의 반응 및 미세구조의 불균일화로 LiF의 첨가량의 증가와 함께 낮아지는 경향을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.175-176
• /
• 2008

In this study, the sintering properties and structural properties of the $Mg_5Ta_4O_{15}$cation-deficient perovskite ceramics with $Li_2CO_3$ additions are investigated. The cation-deficient perovskite ceramics are prepared through the solid-state route. According to the XRD pattern, $Mg_4Ta_2O_9$, $MgTa_2O_6$ and $Mg_5Ta_4O_{15}$ phase existed in sintered pure $Mg_5Ta_4O_{15}$ ceramics. With $Li_2CO_3$, additions, the peak intensities of $Mg_4Ta_2O_9$ and $MgTa_2O_6$ phase were reduced. Also, diffraction intensity of the $Mg_5Ta_4O_{15}$ phase was increased with increments of $Li_2CO_3$ additions. The bulk densities were increased with increasing of $Li_2CO_3$ amount and approach the theoretical density of the $Mg_5Ta_4O_{15}$ ceramics, more and more. Microstructure of the $Mg_5Ta_4O_{15}$ ceramics were densified more and more by additions of $Li_2CO_3$. The bulk density of $Mg_5Ta_4O_{15}$+5wt% $Li_2CO_3$ ceramics sintered at $1500^{\circ}C$ for 10 hours was $5.88g/cm^3$.

• 전기화학회지
• /
• 제10권4호
• /
• pp.239-244
• /
• 2007

산소자리에 치환된 불소가 $Li_{1-x}FeO_2Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8) 양극 활물질에 미치는 영향을 고찰하기 위해 다양한 양의 불소를 치환시킨 $Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8, $0.05{\le}y{\le}0.15$) 양극 활물질을 고상법을 이용하여 합성하였다. 불소 미치환 시료 및 치환양이 0.05와 0.1의 시료의 경우, $1-1.5\;{\mu}m$ 크기의 막대 형상 분말 형태에 50-100 nm정도의 작은 구형 입자들이 주위에 분포되어 있는 형태이었다. 반면, 불소 치환양이 0.15인 시료의 경우, 그 모양이 구형으로 변화되어지며 입자가 급격하게 성장하였다. 합성된 시료를 이용하여 제작된 셀들의 충 방전 수행 결과, $Li/Li_{1-x}FeO_{1.9}F_{0.1}-Li_xMnO_2$ 셀이 163 mAh/g의 가장 높은 초기용량을 보였으며 50 싸이클 후에도 95%의 높은 가역 특성을 보였다. 특히, 활물질내의 불소 치환양이 증가할수록 초기 방전용량도 같이 증가하였으나, 불소이온의 치환양이 일정량을 (y>0.1) 넘는 경우에는 산소 자리에 불소이온이 완전하게 치환되지 못하고 불순물로 존재함으로써 전지의 가역특성을 현저하게 저하시키는 요인으로 작용함을 확인하였다.

• Journal of Acupuncture Research
• /
• 제18권5호
• /
• pp.147-154
• /
• 2001

Amun(GV15), Habkook(LI4) and Shinsu(B23) have been used as a meridian point for apoplexy, hypertention, vertigo etc. The effects of GV 15, LI4 and B23 on the vascular system is not known. The purpose of this Study was to investigate the effect of several meridian points on the regional cerebral bloof flow(rCBF), mean arterial blood pressure(BP) in rats. The changes of BP and rCBF were tested Laser-Doppler Flowmetry(LDF). Results : The results of this Study were obtained as follows ; 1. GV15 and LI4 were increased significantly rCBF. 2. GV15, LI4 and B23 were increased BP, but have not significance. Conclusion : This results suggest that GV15 was increased rCBF by increasing pial arterial diameter, and LI4 was increased rCBF by increasing BP.

• 전기화학회지
• /
• 제17권1호
• /
• pp.49-56
• /
• 2014

탄소가 코팅된 일산화규소(C-coated SiO) 전극에서 전해질 첨가제로서 lithium bis(oxalato)borate(LiBOB)의 영향을 조사하였다. 전해질 조성은 1.3M $LiPF_6$/ethylene carbonate (EC), fluoroethylene carbonate (FEC), diethyl carbonate (DEC) (5:25:70 v/v/v)이며, 여기에 LiBOB을 0.5 wt.% 첨가한 것과 첨가하지 않은 2가지 전해질을 사용하였다. LiBOB을 첨가하지 않은 전해질에서 C-coated SiO 전극은 초기에 저항이 작은 피막이 형성되어 결정질의 $Li_{15}Si_4$를 형성할 때까지 합금화가 진행되며 동시에 큰 부피 변화를 보였다. 따라서 입자의 균열이 발생하고, 전극의 저항이 증가하여 충방전이 진행됨에 따라 용량이 빠르게 감소하였다. 반면에 LiBOB이 첨가된 전해질에서는 초기에 LiBOB의 환원분해에 의해 저항이 큰 피막이 형성되어, 합금화 반응이 원활히 진행되지 못하였다. 따라서 결정질 $Li_{15}Si_4$도 생성되지 못하였고, 결과적으로 부피변화도 적게 발생하므로 입자의 균열과 전극 저항의 증가도 적게 나타났다. 이러한 효과로 싸이클 후반부에서 용량감소가 적었고, 싸이클 성능도 좋은 결과를 보였다. 반면 피막 저항에 의한 영향이 줄어드는 $45^{\circ}C$ 에서는 LiBOB 첨가에 관계없이 합금화 반응이 유사하게 진행되며 비슷한 싸이클 성능을 나타내었다.

• 센서학회지
• /
• 제23권2호
• /
• pp.105-109
• /
• 2014

Structure and electrical properties of $0.85NaNbO_3-0.15LiNbO_3$ ($(Li_{0.15}Na_{0.85})NbO_3$) ceramics were investigated as a function of sintering temperature. $(Li_{0.15}Na_{0.85})NbO_3$ ceramics were prepared by conventional solid state processing. A main phase of the orthorhombic perovskite structure and secondary phase of $LiNbO_3$ were confirmed for all sintered specimens. Dense $(Li_{0.15}Na_{0.85})NbO_3$ ceramics were obtained at sintering temperature above $1050^{\circ}C$. With increasing sintering temperature, the electromechanical coupling factor ($k_p$), piezoelectric constant ($d_{33}$) and relative dielectric constant (${\varepsilon}_r$) of the sintered specimens increased, while the mechanical quality factor ($Q_m$) decreased. These results are due to the increase of grain size and crystallite size of orthorhombic perovskite structure. Based on the temperature dependence of ${\varepsilon}_r$, stable piezoelectric properties were expected because no phase transition found up to $300^{\circ}C$. Typically, kp of 18%, $d_{33}$ of 34.7 pC/N, ${\varepsilon}_r$ of 135, and $Q_m$ of 62.8 were obtained for the specimens sintered at $1200^{\circ}C$ for 5 h.