• Geomechanics and Engineering
• /
• v.25 no.4
• /
• pp.303-315
• /
• 2021

A rigorous and generic similarity solution is developed for assessment of the undrained expansion responses of a cylindrical cavity expansion in K₀-consolidated anisotropic soils. A K₀-consolidated anisotropic modified Cam-clay (K₀-AMCC) model that can represent the initial stress anisotropy and the effects of stress-induced anisotropy is used to model the soil behaviors during cavity expansion. All the seven basic unknowns, the three stress components, the pore water pressure, the particle velocity, the specific volume and the hardening parameter, are reduced to the functions of a dimensionless radial coordinate and are taken as coupled variables to formulate the problem. The governing equations are formulated by making use of the equilibrium equation, the constitutive equation, the consistency condition, the continuity condition and the undrained condition, which are then solved as an initial value problem. The proposed rigorous similarity solution is compared with some well-documented rigorous solutions to validate the solution and to highlight the special expansion responses in anisotropic soils. The results reveal that the present solution can yield more predictions for cavity expansion problems in soils with initial anisotropic stresses.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.558-565
• /
• 2020

A wavelength-independent optical sensor based on an asymmetric Mach-Zehnder interferometer (AMZI) is proposed. The optical sensor based on an AMZI is very sensitive to wavelength, and wavelength drift will lead to measurement error. The optical sensor is compensated to reduce its dependence on wavelength. The insensitivity of the optical sensor to wavelength mainly depends on the compensation structure, which is composed of an AMZI cascaded with another AMZI and can compensate the wavelength drift. The influence of wavelength drift on the optical sensor can be counteracted by carefully designing the size parameters of the compensation structure. When the wavelength changes from 1549.9 nm to 1550.1 nm, the error after compensation can be lower than 0.066%. Furthermore, the effect of fabrication tolerance on compensation results is analyzed. The proposed compensation method can also be used to compensate the drift of other parameters such as temperature, and can be applied to the compensation of other interference-based optical devices.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.5
• /
• pp.71-80
• /
• 2007

Because of the characteristics relating to high tensile ductility, High Performance Fiber Reinforced Cementitious Composites (HPFRCC) are studied to be adopted in repair and retrofit of buildings. A series of three shear wall specimens was tested under constant axial stress and reversed cyclic lateral loading in order to evaluate the seismic retrofit that had been proposed for the shear wall with the opening. The retrofit involved the use of newly developed ECC and MDF(Macro Defect Free), both of which are sprayed through the high pressure pump, over the entire face of the wall. The results indicate that two difference types of retrofitting strategy make the different effects of a rise in the strength and ductility of each specimen.

• Journal of Life Science
• /
• v.20 no.10
• /
• pp.1433-1442
• /
• 2010

Parameters related to dissolved oxygen for the production of pullulan by Aureobasidium pullulans HP-2001 were optimized in 7 l and 100 l bioreactors. The optimal concentrations of glucose and yeast extract for the production of pullulan were 50.0 and 2.5 g/l, respectively, and its conversion rate from glucose was 37% at a flask scale. The optimal initial pH of the medium and temperature for cell growth were 7.5 and $30^{\circ}C$, whereas those for the production of pullulan were 6.0 and $25^{\circ}C$. The optimal agitation speed and aeration rate for cell growth were 600 rpm and 2.0 vvm in a 7 l bioreactor, whereas those for the production of pullulan were 500 rpm and 1.0 vvm. The production of pullulan with an optimized agitation speed of 500 rpm and aeration rate of 1.0 vvm was 18.13 g/l in a 7 l bioreactor. Maximal cell growth occurred without inner pressure, whereas the optimal inner pressure for the production of pullulan was 0.4 kgf/$cm^2$ in a 100 l bioreactor. The production of pullulan under optimized conditions in this study was 22.89 g/l in a 100 l bioreactor, which was 1.38 times higher than that without inner pressure.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1479-1484
• /
• 2014

Based on the full optimized molecular geometric structures at B3LYP/cc-pvtz method, a new designed compound, 4,6,8-trinitro-4,5,7,8-tetrahydro-6H-furazano[3,4-f ]-1,3,5-triazepine was investigated in order to look for high energy density compounds (HEDCs). The analysis of the molecular structure indicates that the seven-membered ring adopts chair conformation and there exist intramolecular hydrogen bond interactions. IR spectrum and heat of formation (HOF) were predicted. The detonation velocity and pressure were evaluated by using Kamlet-Jacobs equations based on the theoretical density and condensed HOF. The bond dissociation energies and bond orders for the weakest bonds were analyzed to investigate the thermal stability of the title compound. The results show that $N_1-N_6$ bond is the trigger bond. The crystal structure obtained by molecular mechanics belongs to $Pna2_1$ space group, with lattice parameters Z = 4, a = 15.3023 ${\AA}$, b = 5.7882 ${\AA}$, c = 11.0471 ${\AA}$, ${\rho}=2.06gcm^{-3}$. In addition, the analysis of frontier molecular orbital shows the title compound has good stability and high chemical hardness.

• Korean Journal of Acupuncture
• /
• v.21 no.4
• /
• pp.69-82
• /
• 2004

Objectives : In the present study, the effect of electroacupuncture (EA) applied to hand yang meridian on the ankle sprain model was examined. Methods & Results : A common source of persistent pain in humans is the lateral ankle sprain. To model this condition, the rat's right ankle was bent repeatedly, overextending lateral ligaments, for 4 min under halothane anesthesia. The rat subsequently showed swelling of the ankle and a reduced stepping force of the affected limb for the next several days. The reduced stepping force of the limb was presumably due to a painful ankle. EA was applied to the several acupuncture point on the contralateral forelimb for 30 min under gaseous anesthesia. After the termination of EA, behavioral tests measuring stepping force were periodically conducted during the next 4 h. EA applied to SI-6 point produced a significant improvement of stepping force of the sprained foot lasting for at least 2 h. However, neigher LI-4 point nor TE-3 point produced any significant increase of weight bearing force. The improvement of stepping pressure was interpreted as an analgesic effect. The analgesic effect was specific to the acupuncture point since the analgesic effect on the ankle sprain pain model could not be mimicked by EA applied to a nearby point, LI-4 or TE-3. The analgesic effect of EA applied to SI-6 was more powerful when EA was applied by low-frequency and high-intensity stimulation. In addition, this effect need to be stimulated more than 15 min. Conclusions : These data suggest that EA produces a potent analgesic effect on the ankle sprain pain model in the rat. This analgesic effect is produced by applying EA to a Tae-Yang meridian at opposite side from the painful area in a stimulus point-specific way.

• Journal of the Korean Magnetics Society
• /
• v.24 no.6
• /
• pp.197-201
• /
• 2014

As the importance of rare metal is increasing globally, Japan introduced the concept of Strategic Elements in 2004, and started Strategic Elements Project in 2007. The Goal of this project run by MEXT (Ministry of Education, Culture, Sports, Science and Technology) is to develop high-function materials and components that do not use rare or harmful elements by studying the role and characteristics of the elements that compose materials and components and decide their functions and characteristics. In September 2010, Japanese coast guard arrested a Chinese fishing boat near Senkaku Islands (Diaoyudao Islands by China), which escalated to the territory issue and eventually a big diplomatic and economic conflict. In order to put pressure on Japanese Government, China used an economic option, which is the ban of rare earth export to Japan. This incident doubled Japan's motivation to develop Strategic Elements and put more efforts into this Project. MEXT set the following three research areas in February 2012: Study of alternative materials using sufficient and harmless elements, Study of applications for the high-functions of Strategic Elements, Study of practical design for components using Strategic Elements. Through a course of gathering the opinion of professionals, MEXT settled down with the following 4 research and study areas for the Strategic Elements Project in June 2012. 1. Magnetic materials to replace Dy, Nd. 2. Catalyst/Battery materials to replace Pt, Rh/Li, Co. 3. Electronic materials to replace In, Ta. 4. Structural materials to replace Nb, Mo. This paper deals with the first area and reviews the results of the research and study as of now.

• Women's Health Nursing
• /
• v.16 no.3
• /
• pp.224-233
• /
• 2010

Purpose: This study explored the relationships among obesity, bone mineral density, and cardiovascular risks in post-menopausal women. Methods: One hundred post-menopausal women were recruited via convenience sampling from osteoporosis prevention program participants who were living in a metropolitan city in September 2006. Obesity was evaluated by body mass index, bone mineral density measured by DEXA scan, and cardiovascular risk factors assessed by a guideline of American Heart Association. Results: Seventy-two percent of women were either in the osteopenia or osteoporosis group, while 28% were in normal range in lumbar vertebrae. Obese women had greater bone mineral density in lumbar (F=3.31, p=.040) and femur (F=4.72, p=.011). Variables for cardiovascular risks were significantly different for high density lipoprotein (F=7.51, p=.001), systolic blood pressure (F=5.21, p=.007), and in percent of 10-year cardiovascular disease risk according to obesity. Conclusion: Post-menopausal women are at risk for obesity, osteoporosis, and cardiovascular disease. In order to prevent these conditions, nursing interventions such as resistance and aerobic exercise that reduces body weight and bone loss, increases high density lipoprotein, and reduces systolic blood pressure, should be proposed continually through health promotion programs for postmenopausal women.

• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.196-202
• /
• 2016

Membrane bioreactor (MBR) technology has previously been used by water industry to treat high salinity wastewater. In this study, an anoxic-oxic biofilm-membrane bioreactor (AOB-MBR) system has been developed to treat mustard tuber wastewater of 10% salinity (calculated as NaCl). To figure out the effects of operating conditions of the AOB-MBR on membrane fouling rate ($K_V$), response surface methodology was used to evaluate the interaction effect of the three key operational parameters, namely time interval for pump (t), aeration intensity ($U_{Gr}$) and transmembrane pressure (TMP). The optimal condition for lowest membrane fouling rate ($K_V$) was obtained: time interval was 4.0 min, aeration intensity was $14.6 m^3/(m^2{\cdot}h)$ and transmembrane pressure was 19.0 kPa. And under this condition, the treatment efficiency with different influent loads, i.e. 1.0, 1.9 and $3.3kgCODm^{-3}d^{-1}$ was researched. When the reactor influent load was less than $1.9kgCODm^{-3}d^{-1}$, the effluent could meet the third discharge standard of "Integrated Wastewater Discharge Standard". This study suggests that the model fitted by response surface methodology can predict accurately membrane fouling rate within the specified design space. And it is feasible to apply the AOB-MBR in the pickled mustard tuber factory, achieving satisfying effluent quality.

• Journal of Acupuncture Research
• /
• v.29 no.2
• /
• pp.89-97
• /
• 2012

Objectives : The purpose of this report is to show that oriental medical treatments, chiefly using Sweet bee venom (SBV) are effective on symptom improvements and calcium removal in the patients diagnosed with calcific tendinitis in supraspinatus. Methods : We applied 0.3~0.6cc of SBV on $LI_{15}$ ($Gyeonu$) at a time and 0.1~0.2cc on each surrounding pressure point. In addition, we treated $Hwangryeonhaedok-tang$ pharmacopuncture on both acupoints of $GB_{21}$ ($Gyeonjeong$) with large intestine tonification of $Sa-Am$. Results : The symptoms improved within 3 weeks in case 1, 4 days in case 2, 5 weeks in case 3. The removal of calcium was detected by radiology at all cases. Conclusions : From the above results, it is considered that the oriental medical therapy including SBV is effective on the removal of calcium.