• Wind and Structures
• /
• 제8권6호
• /
• pp.427-442
• /
• 2005

Numerical and wind tunnel simulations of pollutant dispersion around rectangular obstacles with five aspect ratios have been conducted in order to identify the effects of flow patterns induced by buildings on plume dispersion in the near wake of buildings. An emission from a low source located upwind of obstacles was used in this simulation. The local flow patterns and concentrations around a cubical obstacle were initially investigated using three RANS turbulence models, (the standard $k-{\varepsilon}$, Shear Stress Transport (SST), Reynolds-Stress RSM turbulence model) and also using Large-eddy simulation (LES). The computed concentrations were compared with those measured in the wind tunnel. Among the three turbulence models, the SST model offered the best performance and thus was used in further investigations. The results show, for normal aspect ratios of width to height, that concentrations in the near wake are appreciably affected because of plume capture by the horseshoe vortex and convection by the vertical vortex pairs. These effects are less important for high aspect ratios. Vertical vortex pairs present a strong ability to exchange mass vertically and acts efficiently to reduce ground-level concentrations in the near wake.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.331-337
• /
• 2014

We analyzed the 3-D characteristics of the dynamic response of seabed around a submerged breakwater due to wave loading using a 3-D numerical scheme (LES-WASS-3D). Using our model, which considers the wave-structure-sandy seabed interactions in a 3-D wave field, we were able to investigate the 3-D characteristics of the pore-water pressure in the seabed around the submerged breakwater under various incident wave conditions. To verify the 3-D numerical analysis method suggested in this study, we compared the numerical results with the existing experimental results and found good agreement between them. The numerical analysis reveals that high pore-water pressure in the seabed is generated below a large wave height at the front slope of the submerged breakwater. It was also shown that the non-dimensional pore-water pressure in the seabed increases as the wave period increases because the wave energy dissipation decreases on the submerged breakwater and seabed as the wave period increases.

• 한국수자원학회논문집
• /
• 제45권5호
• /
• pp.473-480
• /
• 2012

고정확도를 보장할 수 있는 Compact Finite Volume Method를 이용하여 수심적분형 흐름 모형과 수심평균된 이송확산 방정식을 해석하는 수치모형 개발과정을 기술하였다. 이차원의 흐름과 파랑의 상호작용에 대한 실험결과와 제시된 수치모형을 이용한 계산결과는 양호하게 일치하였다. 일차원과 이차원공간에서의 흐름에 의한 스칼라의 이송에 관한 수치모의에서도 수차확산이 거의 발견되지 않았고, 매우 정확히 일치하였다. 개수로에서의 난류혼합에 관한 수치모의 결과에서도 합리적인 스칼라의 혼합양상이 관찰되었다.

• 한국추진공학회지
• /
• 제7권1호
• /
• pp.40-48
• /
• 2003

큰에디모사기법을 사용하여 압축성 공동유동을 수치해석하였다. Dynamic 모델을 사용하여 모델상수를 구했으며 공간으로 6차 유한차분기법, 시간에 대하여 4차 Runge-Kutta 수치기법을 사용하였다. 공동 주위의 유동을 보면 중심선을 따른 전단유동의 발달, 에디의 발생과 소멸 현상을 잘 볼 수 있었다. 유동결과로부터 예측된 공진 주파수는 Rossiter의 실험식 결과와 비교적 잘 일치하였다. 평균 유선의 분포는 공동의 중심선을 따라서 평행하였으며 공동 내부 후반부에서 압력이 급격히 감소됨을 알 수 있었다.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.25-33
• /
• 2009

In the present study, the numerical investigation has been carried out to see the effects of water mist sprays on the fire suppression mechanism. The special-purposed program named as FDS was used to simulate the interaction of fire plume and water mists. This program solves the fire-driven flows using LES turbulence model, the mixture fraction combustion model, the finite volume method of radiation transport for a non-scattering gray gas, and conjugate heat transfer between wall and gas flow. The computational domain was composed of a rectangular space dimensioned as $L{\times}W{\times}H=4.0{\times}4.0{\times}2.5\;m^3$ with a mist-injecting nozzle installed 1.0 m high from the fire pool. In this paper, two types of nozzles were chosen to compare the performance of the fire suppression. Numerical results showed that the nozzle, type A, with more orifices having smaller diameters had poorer performance than the other one, type B because the flow injected through side holes deteriorated the primary flow. The fire-extinguishing time of type A was 2.6 times bigger than that of type B.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.627-632
• /
• 2011

The internal broadband noise of a centrifugal fan in a household refrigerator is predicted by using hybrid CAA technique based on stochastic turbulent synthetic model. First, the unsteady flow field around the centrifugal fan is predicted using Computational Fluid Dynamics (CFD) method. Then, the turbulent flow field is synthesized by applying the stochastic turbulent synthetic technique to the predicted flow field. The aerodynamic noise sources of the centrifugal fan are modeled on a basis of the synthesized turbulent field. Finally, the broadband noise of the centrifugal fan is predicted using Boundary Element Method (BEM) and the modeled sources. The predicted result is compared with the experimental data. It is found that the predicted result closely follows the experimental data. The proposed method can be used as an effective tool for designing low-noise fans without expensive computational cost required generally for the LES and DNS simulations to resolve the turbulence flow field responsible for the broadband noise.

• 한국화재소방학회논문지
• /
• 제25권6호
• /
• pp.58-63
• /
• 2011

본 연구는 주거공간에 배치된 가연물의 열역학적 연소모델을 구현하는데 목적이 있다. 화재하중과 화재 강도는 성능설계의 사용이 증가함에 따라 건축물 화재안전 설계에 중요한 요소로 대두되고 있으며, 컴퓨터를 이용한 수치해석을 통해 예측이 가능해 지고 있다. 주거 가연물의 열역학적 연소특성을 예측하기 위해 각 가연물의 수치해석용 모델을 설계하였다. 해석된 결과를 검증하기 위해 수치해석의 결과를 실물 연소실험의 열방출량 결과와 비교하였다. 수치해석을 위해 FDS를 사용하였으며, 난류해석을 위해 LES모델이 사용되었다. 검증결과 열방출율 및 총발열량은 실험결과와 잘 일치함을 확인하였다.

• 대한기계학회논문집B
• /
• 제32권6호
• /
• pp.471-478
• /
• 2008

Detached Eddy Simulation (DES) is performed for developing turbulent flow of the $270^{\circ}$ curved duct at a Reynolds number of 56,690. The curvature ratio on the basis of a centric radius $R_c$ and a duct height H is 3.357. Turbulence models adopted are k-$\omega$ model for Reynolds Average Navier-Stokes (RANS) equation Simulation and Shear Stress Transport (SST) model for DES. DES is used as the hybrid computation technique combined with RANS-SST and Large Eddy Simulation (LES). Predicted results are compared with measured results including the distributions of Reynolds stresses and the flow characteristics on the symmetric plane of curved duct are presented. Judging from the comparison between the predicted and the measured results, the DES approach is applicable to calculate the developing turbulent flow in a $270^{\circ}$ curved duct.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.103-108
• /
• 2011

초임계환경에서 작동하는 케로신/액체산소 동축와류형 분사기의 혼합특성을 수치적으로 연구하였다. 케로신 물성치를 계산하기 위하여 써로게이트 모델이 적용되었다. 난류모델은 LES를 기반으로 하였고, 초임계영역의 상태량을 계산하기위해 SRK 상태방정식, 점성계수와 열전도도에 대하여 Chung이 제안한 고압상태 혼합물에 대한 방정식, 확산계수에 대하여 Fuller 이론에 Takahashi가 제안한 고압상태의 특징을 고려한 식을 적용하였다. 연소실 압력변화에 따른 분사기와 연소실에서의 열역학적 물성치와 혼합특성을 관찰하였다. 또한 분사기의 압력섭동 스펙트럼밀도를 분석하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.530-541
• /
• 2019

To improve our current understanding of tsunami-like solitary waves interacting with a row of vertical slotted piles on a sloping beach, a 3D numerical wave tank based on the CFD tool $OpenFOAM^{(R)}$ was developed in this study. The Navier-Stokes equations were employed to solve the two-phase incompressible flow, combining with an improved VOF method to track the free surface and a LES model to resolve the turbulence. The numerical model was firstly validated by our laboratory measurements of wave, flow and dynamic pressure around both a row of piles and a single pile on a slope subjected to solitary waves. Subsequently, a series of numerical experiments were conducted to analyze the breaking wave force in view of varying incident wave heights, offshore water depths, spaces between adjacent piles and beach slopes. Finally, a slamming coefficient was discussed to account for the breaking wave force impacting on the piles.