• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.75-80
• /
• 2013

In this paper, We proposed a Optical Correlation for indoor positioning based LED-ID. The proposed Optical Correlation has a advantage to low-interference between spread code number sequences and LED-ID. it is applied a spread code to reduce the interference with additional information based LED-ID. The additional information is enable to detect in transmitted signal using auto correlation. Also we designed and implemented the Optical Correlation for clearly detecting the additional information. Simulations were performed to confirm the performance of BER and the power of additional information. Optical Correlation simulator to indoor positioning based LED-ID was implemented to prove a usefulness.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.411-417
• /
• 2014

In this paper, we propose an efficient OFDM(Orthogonal Frequency Division Multiplexing) frame synchronization scheme for LED-ID(Identification) systems. A frame synchronization is an essential procedure for normal operations of OFDM systems. Bernoulli-Gaussian noise is considered in LED-ID systems' environments. In order to enhance the OFDM frame synchronization performance, we add a ROGS(Repeated Orthogonal Gold Sequence) to OFDM signals in the time domain. The power level of a ROGS does not affect a normal operation of the LED-ID systems. Frame synchronization can be achieved successfully over LED-ID channels interfered by impulsive noise owing to good auto and cross-correlation properties of the ROGS.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.43-51
• /
• 2010

In this paper, we studied line coding technology tendency for high speed data communication at LED-ID (Identification) communication system in indoor environment. A LED-ID technology is a communication using visible ray (RGB) that come out in LED device. It is energy curtailment effect and possible in ubiquitous network service applications. The LED-ID system has the above advantages about that the communication throughout the whole room is enabled by high power lighting and lighting equipment with white colored LED which are easy to install and have good outward appearance. Therefore, the transmission by light waves is more suitable for wireless networks than by radio waves. We compared with the NRZ, AMI, 4B5B, HDB3, 8B10B line coding for efficient in error detection and serves data transmission of high speed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.66-74
• /
• 2013

This paper introduces the improvement of QoS to compensate the decreasing LED performance by temperature characteristic in the LED-ID communication system. LED does not only use as a lighting device, but also uses as a communication device. The conventional system is transmitted by RGB of LED following the mixture color ratio, which determined the color of lighting, and the BER performance of each RGB signals. However, when the LED used consistently, it has occurred the heat temperature. As a result, LED is degraded the performance by increased temperature each device. To solve this problem, we proposed the adaptive modulation and coding scheme by temperature of device to improve the performance of system and satisfied the QoS in the LED-ID system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.672-678
• /
• 2013

In the recent year, along with the rapid development of LED technology, many applications using LEDs have been researched and indoor positioning is one of them. In particular, previous indoor positioning systems based on visible light communication combine triangulation manner such as AoA, ToA TDoA. But most of them needs transmitting unique ID of each LED panel. In this paper, we propose an non LED-ID based indoor positioning system in which the visible light radiated from LEDs is used to locate the position of receiver. Compared to current indoor positioning systems using LED light, our system has the advantages of simple implementation, low cost and high accuracy. Through the computer simulation, our system can achieve a high estimation accuracy of 3.6cm in average in the $5{\times}5{\times}3m^3$ room.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.169-176
• /
• 2010

We propose a Z-HBT line coding for a LED-ID system. Z-HBT line coding is defined as follows. First, we apply half bit transition to one bit. Second, we decode encoded bits using difference of bit transition level in one bit duration. As a result, we obtain advantages about synchronization problem and noise effect mitigation at the receiver. We set up outdoor the LED-ID simulation environment. At simulation results, we show 2-3dB gain as compared with existing line coding schemes. The results of the paper can be applied to design and implementation of LED-ID systems for indoor wireless multimedia services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.1078-1083
• /
• 2013

At the ubiquitous age, applications of Wireless Personal Area Network (WPAN) technology using LEDs are in progress. However, visible light communication using LED have weakness, which deteriorates performance of communication. To reduce information losses, which is caused by optical noise, such as incandescent lamps, fluorescent lamps, sunbeam etc., proposed channel coding scheme, double binary turbo codes. In this paper, encoding scheme of the proposed system is described and simulation results are analyzed. We had expected improved performance by using double binary turbo codes. Finally, performances of the proposed system came up to our expectations.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.04a
• /
• pp.139-142
• /
• 2005

This paper describes an automatic finite element (FE) mesh generation for three-dimensional structures consisting of free-form surfaces. This mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of nodes, and (c) generation of elements. One of commercial sol id modelers is employed for three-dimensional sol id structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well control led by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of FE meshes for three-dimensional sol id structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for three-dimensional complex geometry.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.436-442
• /
• 2015

In this paper, we develop an indoor localization device which embeds localization information into indoor light-emitting-diodes (LED) lighting systems. The key idea of our device is the use of the newly proposed "bit stuffing method". Through the use of stuff bits, our device is able to measure signal strengths even in transient states, which prohibits interference between lighting signals. The stuff bits also scatter the parts of the signal where the LED is turned on, thus provides quality indoor lighting. Additionally, for the indoor localization system based on RSSI and TDM to be practical, we propose methods for the control of LED lamps and compensation of received signals. The effectiveness of the proposed scheme is validated through experiments with a low-cost implementation including an indoor navigation task.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1092-1097
• /
• 2011

An anti-collision protocol which tries to minimize the collision probability and identification time is the most important factor in all identification technologies. This paper focuses on methods to improve the efficiency of tag's process in identification systems. Our scheme, Binary Slotted Query Tree (BSQT) algorithm, is a memoryless protocol that identifies an object's ID more efficiently by removing the unnecessary prefixes of the traditional Query Tree (QT) algorithm. With enhanced QT algorithm, the reader will broadcast 1 bit and wait the response from the tags but the difference in this scheme is the reader will listen in 2 slots (slot 1 is for 0 bit Tags and slot 2 is for 1 bit Tags). Base on the responses the reader will decide next broadcasted bit. This will help for the reader to remove some unnecessary broadcasted bits which no tags will response. Numerical and simulation results show that the proposed scheme decreases the tag identification time by reducing the overall number of request.