• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1358-1360
• /
• 1998

In this paper, organic thin film LED(light emitting diode) having ITO glass/$Alq_3$/Al structure using an $Alq_3$ was fabricated by the vacuum evaporation and the absorbance, wave length, 1-V characteristics were investigated. Electroluminescence of green and wavelength of 510[nm] were observed in this device. We observed absorbance form 320[nm] to 430[nm] and knew unstability of $Alq_3$ material as light emitting device.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.439-442
• /
• 1998

In this paper, organic thin film LED(light emitting diode) having ITO glass/Alq$_3$/Al structure using an Alq$_3$ was fabricated by the vacuum evaporation and the absorbance, wave length, I-V characteristics were investigated, Electroluminescence of green and wavelength of 510[nm] were observed in this device. We observed absorbance form 320[nm] to 430[nm] and knew unstability of Alq$_3$ material as light emitting device.

• Food Science and Preservation
• /
• v.19 no.5
• /
• pp.645-651
• /
• 2012

The food functional properties of Pleurotus eryngii cultivated with different wavelengths of light-emitting diode (LED) light were analyzed in this study. The levels of total soluble solids of Pleurotus eryngii increased with all the LED lights, except mixed LED light ($B^*R$, $B^*G$ and $R^*G$). Thirty one kinds of components were detected by analyzing the free amino acids. The total free amino acid contents had a slightly higher tendency in the control group, but the ratios of eight essential amino acids among the total amino acids of Pleurotus eryngii cultivated under all the LED lights, including the blue light (blue, $B^*R$, $B^*G$ and $B^*R^*G^*U$) and the green light, were higher than that in the control group. K was the highest-content of mineral, and Mn was the lowest-content. The Ca content increased through cultivation under all the LED lights, except the blue light, but the Fe content (under the green and $B^*R$ lights), K content (under the red and UV-A lights) and Mg content (under the $R^*G$, UV-A and red lights) increased under the exclusive LED light. The total phenolic compounds increased by cultivation under all the LED lights, except the UV-A and mixed lights ($R^*G$ and $B^*R^*G^*U$). The DPPH radical scavenging activity was also improved by all the LED lights, except the mixed light ($R^*G$).

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.114-121
• /
• 2015

In conventional LEDs, a mesa-structure is usually used and it causes the current to be overcrowded in a specific region. We propose a novel structure of GaN-based LED to overcome this problem. In order to distribute the current in an active region, a spreading pad is inserted at the p-type region in the GaN based LED device. The inserted spreading pad helps the current flow because it is more conductive than the p-type GaN layer. By performing electrical and optical simulations, the effects of the spreading pad insertion are confirmed. The results of electrical simulation show that the current spreads more uniformly and more radiative recombination is produced as well. Moreover, from the optical simulation, it is revealed that the ITO is less absorptive material than p-GaN if the condition of specific wavelength sources is satisfied. Considering all of the results, we can conclude that the luminescent power is enhanced by the spreading pad.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.494-500
• /
• 2010

In this paper, we newly propose a wireless optical identification system and carried out experiments. A wireless optical identification system consists of a reader and a transponder. The configuration of a reader is the same as that of a transponder, which uses LED light as transmission media and detects the signal light with a solar cell. Optical alignment with a lens is not required because the absorption area of a solar cell is wide and flat, and it is very easy to attach a solar cell on the surface of an object. As the light wavelength does not interfere with radio frequency, a wireless optical identification system shows stable operation. In experiments, we realized a wireless optical identification system that automatically identifies the transponder data at a distance of 1 m using solar cells.

• Journal of Satellite, Information and Communications
• /
• v.11 no.1
• /
• pp.51-54
• /
• 2016

This paper present a method which resolves an optical discontinuity in bezel of digital signage using light guide film. On a polycarbonate film, a light guide film is bonded to produce refraction, reflection, diffraction of light. Arc shaped light guide film is assembled on the top LED light sources (red and green) to see light propagation through the film. When the two light sources (red and green) are mechanically attached at the end of the film, optical convergence brings new colors which have light wavelength between red and green. This result indicates that the light waveguide method could solve the light discontinuity on bezel of the digital signage system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.68-72
• /
• 2008

AlGaInP high-brightness LEDs(HB-LEDs) have gained importance a variety of application operating in the red, orange, yellow and yellow-green wavelength. The light generated from inside LED chips should be emitted to the air through the surfaces of the chips. However, because of the differences between the semiconductor and air or epoxy's refractive index, some of the light was blocked so that caused lowering external quantum efficiency. In this study, nano-scale roughness on the top-GaP layer of AlGaInP epitaxial wafer was fabricated to improve' the brightness of AlGaInP LEDs. Nano-scale roughness was made by ICP dry etcher. Our AlGaInP LEDs with nano-scale roughness has higher brightness (about 28.5 %) than standard AlGaInP LEDs.

• Journal of the Korean Chemical Society
• /
• v.45 no.2
• /
• pp.156-161
• /
• 2001

Various oxidation states of Polyaniline(PANI) were chemically synthesized, and characterized by FT-IR, UV-Vis, GPC, TG-DTA, Single layer light emitting diodes(LED) were perpared by spin coating of LEB-PANI solutions which have various oxidation states onto an ITO substrate and subsequent vacuum deposition of aluminum top electrode and then current-voltage characteristics. EL spectrum was investigated It was found that ${\pi}$-${\pi}$* transition were shifled to longer wavelength and molecular excition transition were decreased in the UV-Vis spectra and the intensity of EL and PL were increased as the contents of fully reduced form LEB increased. The turn-on voltage of ITO/LEB/AI structured LED was 5 V. It was found that the white light was emitted only from the phase with reduced epeat unit.

• Journal of the Korean Chemical Society
• /
• v.56 no.5
• /
• pp.577-582
• /
• 2012

Quinine quantitative analysis, photo-bleaching, fluorescence quenching, and urine analysis have been performed by means of a UV-LED fluorometer, which can be easily built and used in a high-school laboratory. The quinine detection range is estimated to be 0.05-80 ppm, enough for many classroom luminescence experiments. The quinine content in commercial tonic water is determined from the calibration curve, and UV photo-bleaching of this anti-malarial drug is demonstrated with clear wavelength dependence. Halide quenching of quinine fluorescence is also observed and the increase in quenching efficiency in the order of $Cl^-$, $Br^-$, and $I^-$ is evident. Urine analyses for the student volunteers have been carried out and the results clearly reveal excretion of the ingested quinine. The student participants are exuberant throughout the course of this study and sense the practices resourceful.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.5
• /
• pp.317-320
• /
• 2016

In order to acquire clear images capable of diagnosing cracked tooth by light transmission, the optical properties of LED light source were examined. Based on the results, the prototype which basically consisted of LED light source, bandpass filter and commercial compact camera module was designed and manufactured. The wavelength and optical power of the LED in the prototype were 850 nm and 7 mW/Sr, respectively. In evaluation of the prototype using microscope, the observation of the crack with width of above $17{\mu}m$ was possible. In addition, image analysis to obtain shape information on the observed tooth cracks was carried out.