• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.706-711
• /
• 2012

The current visible light communication (VLC) systems have a short transmission distance and a low data rate. To overcome this, we studied on the method of appling MIMO technology to VLC. However, it is difficult to apply the original MIMO technology used in RF frequency to wireless VLC. In VLC system, a lens can be used to separate the transmitted signals. And, if we use an image sensor as the receiver, MIMO technology can be applied to LED wireless visible light communication. In this paper, we report an experiment of $2{\times}2$ LED wireless visible light communication using a commercial image sensor receiver. We show the experimental demonstration with a transmission length of 10.5 m and a data rate of 200 bit/s.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.11
• /
• pp.14-25
• /
• 2011

Full-Color LED lighting system requires efficient control of the lighting color in order to easily achieve various color effects. In this paper, we present not only a portable color scanner using color sensors which can control lighting color directly from detected color but also methods to convert detected color to a complementary color, similar colors and so on. In addition, we propose a compensation method for measured sensor color to reduce measurement errors more than 50[%] in detected color. The developed color scanner is applied to control full-color LED ceiling light for emotional lighting.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.36-40
• /
• 2018

Point LED applied in Korea is applied to communication RCLED, but it is designed to be suitable for communication, so it does not meet requirements in fiber coupling rate and optical output. - Currently, domestic optical pipe manufacturers use general LEDs for light emitting devices, but Japanese products use high power point LEDs to develop superior point LED (RED 620 ~ 660nm).

• Current Optics and Photonics
• /
• v.3 no.4
• /
• pp.336-341
• /
• 2019

This paper proposes an optical system where the organic compound content in water is determined by using an ultraviolet (UV) LED (280 nm) and photodetector. The results obtained by the proposed prototype LED spectroscopy system, which includes a single photodetector and two parallel sample holders, are calculated by applying partial least square regression; the values are highly correlated with the actual concentrations of potassium hydrogen phthalate solutions, with an adjusted coefficient of determination about 0.996. Moreover, the total organic carbon values derived from the UV-Vis spectrometer of real samples (lake, river and sea water) differed little from those obtained by the LED spectroscopy. We confirm that the fast, sensitive, and compact LED sensor system can be readily configured for real-time monitoring of organic compounds in water.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.367-372
• /
• 2017

LED illumination has been developed from simple illumination to human oriented multi-functional system depending on the IT convergence trends. Thus, the convergence of IT technology such as various types of sensor and communication functions with application software can make saving of energy, and there are also several needs about the tailor-made illuminations requirements for the diverse users who want to take their own colors, strengths of the light. For the adaption of these kinds of intelligent system illumination, user oriented sensor and control should be possible. The LED lighting control system transmits and receives data via the Bluetooth mesh network and provides functions such as LED lighting control, LED lighting condition monitoring, energy usage monitoring, and energy peak point management. Therefore, in this paper, we suggest wireless communication platform and control system for the LED illumination control. We can expect life extension of LED illumination, and energy saving through this suggested system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.846-847
• /
• 2016

LED lighting is energy in lighting control based on had developed into a human-centered / multi-functional lighting systems from simple one trillion people thereby using environmental change by combining IT technology and software, including a variety of sensor functions and communication functions, depending on the evolution of the IT Convergence Era the reduction, and the strength and the color tone customized illumination of the user-section of light has been desired. For this intelligent lighting system is applied to the sensor and the control center of the user should be possible, and it is necessary for this artist platform of the communication module. In this paper, we propose a communication platform that utilizes Bluetooth BLE module for LED lighting control.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.370-373
• /
• 2010

본 논문에서는 8W급 LED 조명등과 조명등을 제어할 수 있는 소형 콘트롤러를 제작 하였다. 고출력 LED를 사용한 LED 전구 개발은 8W 이상 출력 가능한 LED 전구를 DC로 구동, 기존의 AC 방식이 단점인 누전에 의한 화재 위험 방지 기능이 있으며, 주변의 상황을 탐지할 수 있는 센서를 장착하여 방법용으로 활용할 수 있도록 하거나 개별 점등이 가능하도록 하였다. 또한, LED의 수명 확보를 위해 적정 온도이상 상승하지 않도록 발열부를 설계하여 지능형 조명등 시스템으로 응용 가능한 조명등을 개발하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1293-1300
• /
• 2022

In this paper, research was conducted to prevent various safety accidents that may occur from infant vehicles carrying children and to use infant vehicles easier. In order to prevent the infant vehicle from driving without protection, a brake function is mounted on the infant vehicle wheels using a pressure sensor and a sub motor, and a pressure sensor and an LCD are used to determine whether a seat belt is fastened to prevent the infant from falling from the infant vehicle. In addition, it is designed to turn on the warning light when exceeding a certain temperature and humidity using LCD and LED so that infants can be in a pleasant environment when using a baby vehicle.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2431-2436
• /
• 2012

This paper is implemented simple visible light communication system by combining the communications through LED lighting. It uses a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter to realize LED visible light communication. Initial distance value of the developed transmission and receiver is more than 0~1.5m for LED visible light communication, the overall system transmission rate is organized with thousands kbps variability visible light media transmission system. It was measured the performance experiment during lens wearing or not wearing in order to increase the overall efficiency of the LED module, configures the LED and PD to existing PC module for the performance analysis of the implemented research, experiments the maximum communication distance of the transmitter/receiver according to LED count and the transmission rate, check about application methods and the possibility.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.459-465
• /
• 2022

This paper reports a method to use a wireless sensor network deployed in the field to real-time monitor soil moisture, warning when the moisture level reaches a specific value, and wirelessly controlling an additional device (LED or water supply system, etc.). In addition, we report all processes related to wireless irrigation system, including field deployment of sensors, real-time monitoring using a smartphone, data calibration, and control of additional devices deployed in the field by smartphone. A commercially available open-source Internet of Things (IoT) platform, NodeMCU, was used, which was combined with a 9V battery, LED and soil humidity sensor to be integrated into a portable prototype. The IoT-based soil humidity sensor prototype deployed in the field was installed next to a tree for on-site demonstration for the measurement of soil humidity in real-time for about 30 hours, and the measured data was successfully transmitted to a smartphone via Wifi. The measurement data were automatically transmitted via e-mail in the form of a text file, stored on the web, followed by analyses and calibrations. The user can check the humidity of the soil real-time through a personal smartphone. When the humidity of a soil reached a specific value, an additional device, an LED device, placed in the field was successfully controlled through the smartphone. This LED can be easily replaced by other electronic devices such as water supplies, which can also be controlled by smartphones. These results show that farmers can not only monitor the condition of the field real-time through a sensor monitoring system manufactured simply at a low cost but also control additional devices such as irrigation facilities from a distance, thereby reducing unnecessary energy consumption and helping improve agricultural productivity.