The Journal of the Korea institute of electronic communication sciences (한국전자통신학회논문지)

Korea Institute of Electronic Communication Science (한국전자통신학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Smart Infant Vehicle with Arduino and Pressure Sensor

아두이노와 압력센서를 이용한 스마트 유아차에 관한 연구

  • 이상욱 (남서울대학교 전자공학과) ;
  • 김민영 (남서울대학교 전자공학과) ;
  • 김태우 (남서울대학교 전자공학과) ;
  • 이대규 (남서울대학교 전자공학과) ;
  • 김재욱 (남서울대학교 전자공학과)
  • Received : 2022.10.06
  • Accepted : 2022.12.17
  • Published : 2022.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, research was conducted to prevent various safety accidents that may occur from infant vehicles carrying children and to use infant vehicles easier. In order to prevent the infant vehicle from driving without protection, a brake function is mounted on the infant vehicle wheels using a pressure sensor and a sub motor, and a pressure sensor and an LCD are used to determine whether a seat belt is fastened to prevent the infant from falling from the infant vehicle. In addition, it is designed to turn on the warning light when exceeding a certain temperature and humidity using LCD and LED so that infants can be in a pleasant environment when using a baby vehicle.

본 논문에서는 아이들을 태우는 유아차로부터 생길 수 있는 각종 안전사고를 예방 그리고 보다 수월한 유아차 사용을 위한 연구를 진행하였다. 유아차가 보호없이 주행하는 것을 막기 위하여 압력센서와 서브모터를 활용하여 유아차 바퀴에 브레이크 기능을 탑재하였으며 압력센서와 LCD를 활용하여 안전벨트 결속의 유무를 판단하여 유아가 유아차에서 떨어지는 것을 방지할 수 있도록 설계하였다. 추가로 LCD와 LED를 활용하여 일정 온습도를 넘어가면 경고등이 켜지도록 설계하여 유아가 유아차를 사용할 때 쾌적한 환경에 있을 수 있도록 설계하였다.

Keywords

References

  1. S. Wang, "A Study on the Design of Multipurpose Smart Stroller(MSS)," Master's Thesis, Shilla University Graduate School of Design, 2019.
  2. H. Lee, "A Study on the Usability of Multipurpose Stroller," Master's thesis, Kookmin University Graduate School of Design, 2012.
  3. Korea Consumer Agency (editor), "Analyze trends in children's safety accidents in 2019," Safety report, May 2020.
  4. J. Lee and J. Kim, "A Reviw of Child Safety Seats for Promoting Children's Traffic Safety," J. of Korean Parent Child Health, vol. 10, no. 1, 2007, pp. 77-90.
  5. S. Mun, J. Lee, J. Lee, G. Park, and Y. Han, "Smart Closet based on Arduino MEGA," J. of the Korea Institute of Electronic Communication Sciences, vol. 17, no. 5, Oct. 2022, pp. 949-957.
  6. O. Kwon, I. Kang, D. Min, H. Im, and Y. Park, "A Study on the Smart Farm Characteristics Using Multiple Sensors," J. of the Korea Institute of Electronic Communication Sciences, vol. 16, no. 4, Aug. 2021, pp. 719-724. https://doi.org/10.13067/JKIECS.2021.16.4.719
  7. J. Kim, J. Park, and J. Lee, "A Pressure sensor system for detecting driver's drowsiness based on th respiration," J. of The Korea Institute of Intelligent Transport Systems, vol. 12, no. 2, Apr. 2013, pp. 45-51.
  8. B. Min, G. Park, J. Park, H. Kim, and Y. Ko, "Stroller automatic brake system using gyro sensor," J. of the Korea Institute of Electronic Communication Sciences, vol. 12, no. 4, Aug. 2017, pp. 599-606. https://doi.org/10.13067/JKIECS.2017.12.4.599
  9. T. Bae, J. Kang, J. Park, B. Kim, and B. Lee, "Improving Safety of Biycle Driver System using Arduino," J. of the Korea Institute of Electronic Communication Sciences, vol. 12, no. 4, Aug. 2017, pp. 525-532. https://doi.org/10.13067/JKIECS.2017.12.4.525
  10. T. Kwak, C. Moon, J. Lee, J. Ko, and C. Yoo, "DC-DC Converter Design For Electric Regenerative auxiliary Brake System," J. of the Korea Institute of Electronic Communication Sciences, vol. 14, no. 3, June 2019, pp. 519-528. https://doi.org/10.13067/JKIECS.2019.14.3.519
  11. J. Jeong, "A Study on the Improvement of Charging Safety of Lithium-ion Batteries in Electric Kickboard," Master's Thesis, Ajou University Graduate School of IT Convergence, 2020.