• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.97-98
• /
• 2008

n-ZnO/p-Si heterostructure is a good candidate for ZnO-based heterojunction light emitting diodes(LED) because of its competitive price and lower driving voltage. However, the conventional LED shows much lower extraction efficiency, because it has small top contact and large backside contact. In this structure, the injected current from the top contact enters the active region underneath the top contact. Thus, the emitted light is hindered by the opaque top contact. This problem can be solved by using a current-blocking layer(CBL) that prevents the current injection into the active region below the top contact.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.6
• /
• pp.1224-1239
• /
• 2020

This study develops a wearable solar energy harvesting device that absorbs solar energy to generate and store power which can be used during outdoor activities by users even after dark. For this study, a prototype hat for outdoor activities at night was developed after the design of a solar energy harvesting generation, storage, and delivery system was designed that could store energy to light up LEDs. First, the main control board of the system was designed to integrate the charging function, the darkness detection circuit, the battery voltage sensing circuit, and the LED driving circuit in order to reduce bulkiness and minimize the connection structure. It was designed to increase convenience. Second, the system was designed as a wearable fashion product that connected each part with fiber bands and manufacturing it so as to be detachable from the hat. Third, charging and LED operation tests show that the battery is fully charged after 5 hours even in winter when the illuminance value is low. In addition, the LED operation experiment verified the effectiveness of a buffered system that could operate the LEDs for about 3 hours at night.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1293-1300
• /
• 2022

In this paper, research was conducted to prevent various safety accidents that may occur from infant vehicles carrying children and to use infant vehicles easier. In order to prevent the infant vehicle from driving without protection, a brake function is mounted on the infant vehicle wheels using a pressure sensor and a sub motor, and a pressure sensor and an LCD are used to determine whether a seat belt is fastened to prevent the infant from falling from the infant vehicle. In addition, it is designed to turn on the warning light when exceeding a certain temperature and humidity using LCD and LED so that infants can be in a pleasant environment when using a baby vehicle.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1075-1080
• /
• 2003

Design and fabrication process of a full inorganic electroluminescent microdislay based on aluminum / nanostructured porous silicon reverse biased light emitting Schottky diodes are discussing. Being of a solid state construction. this micro-display is cost-effective, thin and light in weight due to very simple device architecture. Its benefits include also super high resolution, wide viewing angles, fast response time and wide operating temperature range. The advantages of full integration of a LED-array and driving circuitry onto a Si-chip will be also discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.7-7
• /
• 2009

This presentation will introduce Merck's investments for business to support the future market growth as "trendsetter contributor". As the world's oldest phamaceutical & chemical company, Merck has made the seamless investment for innovation. The investment for the new technologies is being continued for new LC materials, OLED material, organic electronic materials for flexible display, more environment friendly products of cell Etching Solutions to Solar Cell makers and variety of high-efficiency phosphors for LED applications. These investment portfolio is well in line with future business environment driving for eco-friendly, thin, fast, low power consumption."

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.325-331
• /
• 2016

In driving at evening or night, we are not able to recognize the speed bump and so stop suddenly. It could result in accidents. And also, we have a restriction of street light installation in farm road because it could be harmful to the crops and driver could not recognize the walking people. It needs to develop the speed bump with light and streetlight to be non harmful to the crops. So, we develop both the speed bump and streetlight with LED which could be non harmful to the crops and be increased recognition of walking people in farm road. For LED lighting power, we use the solar cells, and piezoelectric elements. It has automatic on/off according to power saving rates without illumination sensor. Minimization of circuit elements and design of minimum resisters and low power LED was used for power saving in assuring 3-days.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2020.11a
• /
• pp.161-162
• /
• 2020

Major advanced ports around the world are preparing for environmental regulations such as increased efficiency of ports and low emission of pollutants in ports by utilizing fourth industrial technologies and ICT technologies such as AI, big data, self-driving cars and connected cars. It is also investing in developing fully unmanned terminals to solve the problem of workforce reduction caused by avoidance of 3D industries. However, the introduction of advanced technology is being delayed in domestic ports, which has led to a drop in port efficiency. In addition, port safety accidents have also occurred frequently, seriously affecting port marketing. Thus, the characteristics and types of each container terminal in Korea were analyzed and the factors for introducing autonomous cooperative driving were classified into five section factors and 15 division factors. Hierarchically classified factors will be surveyed on workers working in shipping lines, port construction, container terminals and related ministries.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.186-195
• /
• 2017

Recently, autonomous vehicles have been studied actively. There are various technologies such as ITS, Connected Car, V2X and ADAS in order to realize such autonomous driving. Among these technologies, it is particularly important to recognize where the vehicle is on the road in order to change the lane and drive to the destination. Generally, it is done through GPS and camera image processing. However, there are limitations on the reliability of the positioning due to shaded areas such as tunnels in the case of GPS, and there are limitations in recognition and positioning according to the state of the road lane and the surrounding environment when performing the camera image processing. In this paper, we propose that LED lights should be installed for autonomous vehicles in tunnels which are shaded area of the GPS. In this paper, we show that it is possible to measure the position of the current lane of the autonomous vehicle by analyzing the color temperature after constructing the tunnel LED lighting simulation environment which illuminates light of different color temperature by lane. Based on the above, this paper proposes a lane positioning technique using tunnel LED lights.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.69-75
• /
• 2015

Road facilities for safe driving were designed for drivers to distinguish them during day and night, but they cannot play their role when the weather becomes worse. Recently, the road facilities have been designed by using electric and electronic technology so that they can be displayed well at a long distance, but they should be replaced very often due to their frequent breakdown. So, there are many problems in traffic calming and maintenance. In this study, to solve the above problems, semi-permanent LED beacon light was installed in the area where traffic accident are frequent, and monitoring system was developed so that the LED beacon light can be maintenanced by connecting with system. For the above installation and development, system was based on window operating system and it was developed for worker to operate it by using P.C. through connecting with wireless local area network. The result of this study led to analyzing state information on the battery of field-installed LED beacon light in real time, and manegement to effectively by predicting their life cycle.

• Journal of architectural history
• /
• v.28 no.3
• /
• pp.29-44
• /
• 2019

A major performance stage carpenter, Jang Insang led performance stages from the 1719 Sukjong Royal Banquet and was confirmed by historical records to be the first craftsman. Lee Wandeuk led the Hwaseong Fortress performance stages of the Jeongjo period and Gichuk Jinchan performance stages of the Sunjo period. The carpenter techniques he used during the Jeongjo period were succeeded to the Sunjo period. Ahn Sungil was the head craftsman who led the performance stages of Jagyeongjeon Jinjak, Muja Jinjak, and Gichuk Jinchan of the Sujo period, under which the foundation for court palace performances was laid. The progression of major carpenters includes Jang Insang of the Sukjong period, Jeon Yoochu of the Yeongjo period, Ahn Sugil of the Sunjo period, Yoon Seoksin of the Heonjong period, Kim Yoonsik of the Gojong period, Lee Jongyoon, Kim Soongil, Seo Sangmook, and Han Sujoon. In addition, the Major Repair of Injeongjeon Hall (1857) of the Cheoljong period was the most important palace construction project for transferring the carpenters' skills. Through this project, Ahn Sungil of the Sunjo period, Kim Myeonggap, Yoon Seoksin of the Heonjong period, Kwon Deuknyang, and Kim Sungil of the Gojong period were able to interact with each other. That is, this major repair project of Injeongjeon Hall reflected the major carpenters' best techniques through performance stage construction, showing the progression of Ahn Sungil, Yoon Seokshin, and Kim Sungil, who led the constructions of Gichuk Jinchan of the Sunjo period (1829), Mushin Jinchan of the Heonjong period (1848), and Jeonghae Jinchan of the Gojong period (1887), the most impressive performance stages of the late Joseon period. The carpenters of the court performance stages participated in important construction projects of the royal palace, reflecting the superior technical skills of the carpenters in the construction of court palace performance stages. The carpenters who played a leading role in the construction of performance stages were able to interact with one another and transfer their excellent technical skills, providing the driving force that allowed court performance stages to blossom into splendid and high-quality court stages in the late Joseon Dynasty.