• Journal of computational fluids engineering
• /
• v.16 no.3
• /
• pp.47-51
• /
• 2011

Dark Mura phenomena which can happen at the region with high temperature gradient in a Notebook LCD Monitor using LED light source has numerically been studied. The calculation was conducted under the nearly realistic conditions by considering the anisotropic thermal properties of materials and the real dimensions of each component. The two performance indices of LED monitor, i.e., the maximum temperature and the spacial gradient of temperature were examined for the various shapes, lengths and thickness of heat sink plate. Calculated results give more reasonable temperature distribution comparing with experimental results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.144-149
• /
• 2013

With the increasing of service robots, human-robot interaction for natural communication between user and robots is becoming more and more important. Especially, face recognition is a key issue of HRI. Even though robots mainly use face detection and recognition to provide various services, it is still difficult to guarantee of performance due to insufficient test methods in real service environment. Now, face recognition performance of most robots is evaluation for engine without consideration for robots. In this paper, we show validity of test method using LED monitor through performance comparison of real images with from images LED monitor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.294-298
• /
• 2000

As the LED or LCD technology has been developed, if we use LED or LCD pannel, more wide color range coluld be obtained as CRT monitor. Specially, full color LED display is developed by high brightness blue LED. It can be applicable to display pannel with a long-life, wide visible angle and high brightness. A display pannel shows the images of CRT monitor performed by the main computer. Graphic application in the main computer is therefore more important in the market. Conventional 3D STUDIO, one of graphic softwares, has difficulties in manipulating and understanding the specific terminology so that one may need more time to learn it. We, therefore, developed graphic application which can recycle the conventional 3D images by creating or editing the image easily.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.111-116
• /
• 2022

In the paper, A prototype Fetal Heart Monitor, mini - size, was designed and produced for pre-mothers to measure the rate and rhythm of their features's heart at home.Pre-mothers could listen fetal heart rhythm through an inner bluetooth speaker ant the monitor. LED colors show the frequency of fetal heart rate variability on the monitor. All measured health information, by ultrasonic resonator and bluetooth speaker, is linked to a mother's smart phone. A test verified this simple measuring device helps users discover the symptoms of fetal health. Patients using at home devices usefully prevent sudden cardiac death and myocardial infraction by discovering symptoms.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.257-258
• /
• 2008

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.31-36
• /
• 2015

In this paper, an LED lighting system that is capable of automatic or maunal dimming control using a ultrasonic sensor and Bluetooth wireless communication technology is presented. The LED lighting system consists of a ultrasonic sensor, microcontroller unit, Bluetooth wireless communication, LED driver, and LED light source. By using the implemented LED lighting system sample, it is shown that the automatic and manual dimming control is realized. By using the ultrasonic sensor, the LED lighting is automatically brighter or dimmer depending on the distance between the sensor and an object. When using a smartphone that includes Bluetooth wireless communication function, one can not only manually control the brightness of the LED lighting from level 1 to 10, but also monitor the distance between the sensor and object on the smartphone.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.273-274
• /
• 2018

Recently, many countries around the world are investing heavily in green industries based on green IT technology. The key industry in the green industry is LED. If we replace traditional lighting, we can save a lot of socioeconomic costs. Because it is energy efficient. However, the research and development on maintenance and management are still insignificant about LED lighting. Therefore, after the failure, the post-treatment is delayed and often occurs. In order to solve these problems, it is planned to detect the failure of the LED lighting and to establish a monitoring system that can monitor the situation in real time on the computer or mobile phone of the remote manager using the latest IoT network technology.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.3
• /
• pp.35-39
• /
• 2013

In this paper, we developed an optical sheet for LED lighting with integrated $CO_2$ gas and temperature sensor which can monitor at the indoor environment. The optical sheet for LED lighting is fabricated through PMMA(Polymethyl methacrylate) injection process using mold. This research enables to fabricate the reflective sheet, light-guide plate and the prism sheet in a optical sheet. The fabricated sheet demonstrates higher intensity of optical efficiency compared with single-sided sheets. The $CO_2$ sensor was fabricated using NDIR(NON-Dispersive Infrared) method and it has $0.0235mV/V{\cdot}PPM$ sensitivity. The temperature sensor was fabricated using RTD(Resistance temperature detector) method and it has $0.563{\Omega}/^{\circ}C $sensitivity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.66-72
• /
• 2016

An LED lighting control system was developed to combine information technology and LED lights for efficient management and energy savings. The system can monitor and control the status of an LED luminaire using Bluetooth wireless communication, sensor technology, and smart phones. An LED lighting control circuit was designed using a temperature sensor, illumination sensor, and Bluetooth module with a fuzzy constant-current control circuit. We extended the lifetime and prevented damage to the LED by optimizing the supply current of the LED luminaire based on the heat-generation temperature of $70^{\circ}C$ of an LED heat sink. We also automatically adjusted the ON/OFF time depending on the ambient illumination of the LED luminaire. By allowing easy control of the LED luminaires on a smartphone, we improved the efficiency and achieved energy savings. The control system was validated through experiments for normal operation.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.395-400
• /
• 2017

As a serial communications protocol, Modbus has become a practically standard communication protocol and is now a commonly available means of connecting industrial electronic devices. Therefore, all devices can be connected using the Modbus protocol with the measurement and remote control on ships, buildings, trains, airplanes and more. The existing Modbus that has been used is based on serial communication. Modbus TCP uses Ethernet communication based on TCP / IP which is the most widely used Internet protocol today; so, it is faster than serial communication and can be connected to the Internet of Things. In this paper, we designed an algorithm to control LED lighting in a wireless Wi-Fi environment using the Modbus TCP communication protocol, and designed and implemented a LED controller circuit that can check external environmental factors and control remotely through the integrated management system of a ship. Temperature, humidity, current and illuminance values, which are external environmental factors, are received by the controller through the sensors, and these values are communicated to the ship's integrated management system via the Modbus protocol. The Modbus can be connected to Master devices via TCP communication to monitor temperature, humidity, current, illuminance status and LED output values, and also users can change the RGB value remotely in order to change to the desired color. In addition, in order to confirm the implementation of the controller, we developed a simulated ship management system to monitor the temperature, humidity, current and illumination conditions, and change the LED color of the controller by changing the RGB value remotely.