• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.68-69
• /
• 2011

Realistic amounts of time delay are found to have significant effects on the average output LED current and on the critical inductor value at the boundary between the two conduction modes. Especially, the time delay can provide an accurate LED current for the peak current controlled (PCC) buck converter with a wide input voltage. Experimental results are presented for the PCC buck LED driver with constant-frequency controller.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.36-37
• /
• 2013

This paper presents high voltage operation sensing boost converter with high side current. Proposed topology has three functions which are high voltage driving, high side current sensing and low voltage boost controller. High voltage gate driving block provides LED dimming function and switch function such as a load switch of LED driver. To protect abnormal fault and burn out of LED bar, it is applied high side current sensing method with high voltage driver. This proposed configuration of boost converter shows the effectiveness capability to LED driver through measurement results.

• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.886-894
• /
• 2012

This paper presents a secondary-side, dual-mode feedback LLC resonant controller IC with dynamic PWM dimming for LED backlight units. In order to reduce the cost, master and slave outputs can be generated simultaneously with a single LLC resonant core based on dual-mode feedback topologies. Pulse Frequency Modulation (PFM) and Pulse Width Modulation (PWM) schemes are used for the master stage and slave stage, respectively. In order to guarantee the correct dual feedback operation, Phased-Locked Loop (PLL)-based automatic duty control circuit is proposed in this paper. The chip is fabricated using $0.35{\mu}m$ Bipolar-CMOS-DMOS (BCD) technology, and the die size is $2.5mm{\times}2.5mm$. The frequency of the gate driver (GDA/GDB) in the clock generator ranges from 50 to 425 kHz. The current consumption of the LLC resonant controller IC is 40 mA for a 100 kHz operation frequency using a 15 V supply. The duty ratio of the slave stage can be controlled from 40% to 60% independent of the frequency of the master stage.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2334-2342
• /
• 2015

This paper proposes an LED driving circuit with a digital controller, power factor correct (PFC) function, and low light flicker. The key topology of the proposed circuit is a conventional Flyback combined with a pre-stage. As a result, there will be less light flicker than with other one-stage PFC circuits. A digital controller, implemented using a low-cost microcontroller, dsPIC30F2020, will meet PFC and low light flicker. The experimental results validate the functionality of the proposed circuit.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.6
• /
• pp.73-80
• /
• 2012

Generally, the phase control dimmer has been widely used due to simple interface and easy handling. However, the electrical characteristics are not good for the method in which the phase control dimmer cuts the input voltage. This paper has researched about DALI(Digital Addressable Lighting Interface) controller, that is the digital lighting control method, and implemented DALI protocol satisfied with the IEC-62386 standard. In addition, the existing phase control dimmer was used as the controller of DALI and not only individual control but also group control was possible. And the performance was proved to be good by applying our theory to 30[W] LED lighting control system.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.487-494
• /
• 2019

In this paper, we designed IOT(Internet of Things) based hydroponic plant factory in order to avoid the effects of fine dust penetrating into the soil, and proposed the PLC(Programmable Logic Controller) control methods. The designed plant factory could monitor the density of oxygen, the density of nutrient solution, temperature and humidity through touch screen and smart phone, and control the heater and cooler, ventilation and dehumidifier, and wavelengths of LEDs to grow plant in appropriate environments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.4
• /
• pp.1-5
• /
• 2012

By using LED optical devices and improving the efficiency of optical devices as well as lighting apparatus for humans, LED lighting industry puts the purpose of manufacturing the main products related with information, electric, large-sized LCD BLU, automobile, shipbuilding, agriculture, medical treatment, environment, and telecommunications, etc. Moreover, the main products and the industrial lighting products are manufactured with fusion, as the result, LED lighting industry provides various effects as well as sources of technology based on practical use of LED technology in order to develop the industry from the perspective of the lower price, the higher efficiency, the higher function, the deeper reliance. In the future, not only the development of new LED technology but also the fusion and combination of digital IT technologies using wire-wireless communication, sensor, controller, and artificial intelligence will be expected to create new industrial fields.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2014

Recently, building is rapidly develop more intelligently because of the development of industries. And people seek such as comfort, efficiency, and convenience in office environment and the living environment. Also, people were able to use a variety of devices. Smart TV and smart phones were distributed widely so interaction between devices and human has been increase the interest. A various method study for interaction but there are some discomfort and limitations using controller for interaction. In this paper, a user could be easily interaction and control LED through using Kinect and gesture(hand gestures) without controller. we designed interface which is control LED using the joint information of gesture obtained from Kinect. A user could be individually controlled LED through gestures (hand movements) using the implementation of the interface. We expected developed interface would be useful in LED control and various fields.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.475-480
• /
• 2012

This study on the methode is easied to distinguish with emotional visual lighting on AtoN facility using 3colors LED, and which is controlled to on-off switching of approach light in shore or harbor. The identification have easied to provide a differentiation between the AtoN facility of red and white light and surrounding light in harbor both sides. And the integrated controller have designed to left-right and serial sequential lighting system for harbor guidance using the GPS synchronous or timer. There is expectation effect that is prevent a confusion about distinguish of facility by ship's operator and to beautify a night scene of harbor, which is expressed to emotional identification lighting and variable color lighting on AtoN body by vertical layer color lighting using LED. In addition, the performance of AtoN is implemented to display with guidance light the harbor safety message by morse code lighting. Effectiveness of system is enhanced that age and power consumption reduce by candle alternated high light LED.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.427-428
• /
• 2011

조명용 LED 시스템은 크게 LED 광원과 이 광원을 구동하기 위한 Power부로 구성되며 LED를 이용한 조명용 광원을 구성할 경우 LED 자체가 점광원이므로 면광원 구성을 위해서는 많은 수의 LED Array 구성이 필요하다. LED Array 구성에 있어 직 병렬 구성 및 조합은 직류 공급 장치의 출력 사양을 결정하는 중요한 요인이 된다. 본 논문에서는 온도 변화에 따른 전류변동을 보상하기 위한 DC/DC 컨버터 구조를 제안한다. 컨버터의 Base 입력전압 최대치는 온도변화에 대한 전류변동의 최저치가 되며, 온도변화에 따른 전압 조정을 위한 컨버터는 0~6[V]만을 제어함으로서 낮은 전압으로 전류를 제어하고, 결과적으로 효율을 증대할 수 있을 거라 예상된다.