• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.12-18
• /
• 2011

In this paper, did numerical simulation to confirm LED module for lighting and protection against heat special quality of heat sink device. Analysis was gone dividing on case that emitting light side turns normalcy department considering that eat of device according to usage and case that turn down looking being street lamp of 200 W or security appointment lighting device analysis case, and also, volume of thermal element divides on big case and small case and analyzed. Confirmed that can do so that may discharge LED's thermal value to outside enough in analysis wave and current heat sink shape, and investigated that difference of protection against heat performance according to position of device and size of thermal element appears.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.23-30
• /
• 2014

Recently, Light Emitting Diode(LED) light is changing the light equipment, which was considered just as a power-controlled device in home-network, into a IT convergence device by combining illumination function with wireless communication. As a result, Visible Light Communication(VLC) becomes a more practical solution to ubiquitous networks due to the more spread of LED light. One of representative applications using VLC is a VLC-based indoor navigation system which can provide high-accuracy indoor localization. In this paper, we model and implement a VLC based-indoor navigation system in which a fluorescent light type of LED lamp, which is normally used in large buildings, and smart devices, which are usually used by users, are utilized as main components for indoor navigation. Subsequently, it is expected that the paper can contribute to make VLC applications be more active.

• Korean Journal of Optics and Photonics
• /
• v.35 no.3
• /
• pp.95-106
• /
• 2024

In the 21st century, white light-emitting diodes (LEDs) are widely used as backlighting for liquid crystal displays and as a light source for general illumination. However, white LEDs used in lighting often use a single yellow phosphor on top of a blue LED chip, which lacks the ability to reproduce natural colors in objects under conventional illumination accurately. Recently, researchers have been actively working on realizing high color-rendering lighting by incorporating red quantum dots to improve the spectrum in the long-wavelength band, which is deficient in conventional white LEDs. In particular, how to develop and apply remote quantum dot components to ensure long-term reliability is currently under active research. This paper introduces recent research on remote quantum dot components and the current status of developing high color-rendering lightings with them. Especially, we focus on various factors that are important to consider in optimizing the optical structure of the quantum dot components and discuss the future directions and prospects of research for high color-rendering lighting technology.

• Journal of Industrial Convergence
• /
• v.22 no.2
• /
• pp.55-62
• /
• 2024

Visible light communication, which transmits information using visible light, has advantages such as ultra-high speed, ultra-delay, and ultra-connectivity, so research is being conducted as a way to complement 6G communication. In this paper, a study was conducted to overcome the performance degradation caused by the RGB mixing ratio in visible light communication. In a visible light communication system using LED lighting, the role of lighting is an important function, and when used for communication, the performance difference according to the RGB mixing ratio inevitably occurs. In particular, if the intensity of light is below a certain standard, the problem of deteriorating the performance of the entire system occurs. In this study, when a certain performance or less occurs in the communication system caused by the difference in the mixing ratio among the three RGB channels, the remaining two signals except the LED with the best performance are transmitted to STBC (Space-Time Block Coding) to ensure the quality of communication. A computer simulation was performed to verify the performance of the proposed system, and it can be seen that the performance of the proposed system is improved compared to the existing system.

• Resources Recycling
• /
• v.32 no.6
• /
• pp.3-9
• /
• 2023

Separation of LED packages from PCBs and analysis of the adhesive components was conducted to enhance the recycling potential of LED modules. LED package was separated from PCBs using heat treatment under optimal conditions: temperature of above 250 ℃ and time of 20 minutes. The separation equipment can be established using a hot air injector with controlling the rotational speed of the internal screw. The separation efficiency of each type of substrate (aluminum and glass fiber) was investigated with the thickness range of the adhesive materials (0.25-0.30 and 0.30-0.35 mm). Under the optimal conditions, the efficiency can reach to 97.5% for both types of substrates with adhesive materials of thickness 0.25~0.30mm. Characterization of the residual adhesive substances from the separated LED package and PCB using microwave digestion and ICP analysis showed that the residue contained of 95% of Sn, less than 5% of Cu and Ag.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.3
• /
• pp.255-260
• /
• 2023

In order to spread LED lighting, LED lighting technology directly driven by alternating current (AC) commercial power has recently been introduced. Since current does not flow at a voltage lower than the threshold voltage of the LED, a non-conductive section occurs in the current waveform, and the higher the threshold voltage of the LED, the more discontinuous current waveforms are generated. In this paper, multi-LED modules are connected in series so that the threshold voltage can be adjusted according to the number of LED modules. A small number of LED modules are driven at a low instantaneous rectified voltage, and a large number of LED modules are driven at a high instantaneous rectified voltage to lengthen the overall lighting time of AC-LED lighting, thereby minimizing the luminance deviation of AC-LED lighting. In addition, the load current flowing through the LED module is adjusted to be the same as the design current even at the maximum rectified voltage higher than the design voltage, so that the light brightness of the LED module is kept constant. Therefore, even if the rectified voltage applied to the LED module changes, the AC-LED lighting in which the light brightness is constant and the luminance deviation is minimal has been realized.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.466-470
• /
• 2022

In order to widely disseminate LED lighting, LED lighting technology that directly uses AC commercial power has been recently introduced. AC powered LED lighting technology has a problem in that the light brightness of the LED changes because the voltage applied to the LED and the current flowing through the LED continuously change. In this study, when the LED current is greater than the design current, the current control signal generated by the controller is supplied to the current source to supply only the design current to the LED by increasing the voltage drop at the current source. If it is smaller than the design current, the controller is adjusted so that the current is supplied only to the LED without a voltage drop in the current source. It can be seen that the higher the maximum rectified voltage, the faster the lighting time of the LED light emitting block is, so that the power factor of the LED lighting is improved. The LED lighting technology proposed in this study enables LED lighting with constant light brightness, reduced power consumption, and long lifetime.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.77-83
• /
• 2013

Nowadays, the limitation of Lighting control and management skills is the excessive cost of equipments, the operational difficulties and wasting energy. To solve this problem is in need of communication and management S/W that is worked out complexly well as a information system of smart lighting energy, which is loaded wireless network facility. This paper made a study od the energy saving technology through energy monitoring and we developed LEIS(Lighting Energy Information Sysem) to converge this one. LEIS is monitoring and control lighting energy data that is collelcted from sensors by Zigbee mesh network and shows lighting use information by visualization to users. It is consists of lighting energy information data base based on LEM(Lighting Energy Metering) information and LEIS Web application, provide function scenario to manage energy optimization through LEIS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.77-83
• /
• 2014

Visible light communication is a converging communication by technologies that enable solutions using the LED Lighting. There is a need to research about it in order to improve the performance of the wireless communication by using a Color LED and improve the efficiency of data. In this paper, Assume the General indoor communication environment and LED communication systems based on CSK-OFDM applied to a MIMO communication system, We studied about transmitting method of more efficient communication. After performing the simulation based on IEEE 802.15.7 Standardization, as a result of the analysis of performance, it was confirmed the there is a significant impact on the performance of SNR and BER performance by the transmitting method based on MIMO and external noise using the LED communication system based on CSK-OFDM.

• Journal of Industrial Convergence
• /
• v.17 no.4
• /
• pp.125-129
• /
• 2019

With the growing number of people using bicycle, the number of bicycle accidents also has been increasing. It is said that bicycle accident can be reduced up to 11%~44% when riding a bicycle if LED light is used. The headlight of the bicycle makes exposure effect to the opposite side of bike rider while taillight makes exposure effect to the rear bike rider for improving safety. Bicycle safety device capable of displaying a change of direction by LED is implemented in this study in response to control button signal. This signal makes LED light which is installed in pedal and wheel of bicycle as a module type emitting or flickering during the fixed hour. Bicycle auxiliary device in pedal which is able to improve safety using LED when bikers are riding a bike at night is developed in this study. Bicycle safety device applying wireless communication technology will be expected alternative technology in the future to solve a social problem such as energy, environment, and safety.