• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.533-535
• /
• 2018

In the 21st century, in which the accident rate is rapidly increasing in proportion to the development of automobiles, In order to reduce the number of accidents, this paper was written for the convenience of the elderly people with disabilities and the handicapped. When a driver's safety accidents and various signals are transmitted through a smart phone by voice, the voice signal is processed as a video signal through the rear LED pannel of the vehicle, so that an urgent situation or a current state can be clarified It is also possible to use the local area network as a billboard and I would like to propose a study to show the advertising effect and current traffic situation.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.426-428
• /
• 2001

현재 국내에서 사용되고 있는 신호등용 전구는 전량 해외에서 수입되는 백열전구로써, 낮은 발광효율($8.0{\sim}8.4lm/W$)과 짧은 수명(약 4,000 hours)으로, 지방 자치단체의 경우 전기에너지의 과소비와 과중한 전력요금 부담 잦은 유지보수로 관리비용이 증가하고 교통환경을 악화시키는 원인이 되고 있으며, 국가적으로는 첨두부하 증가, 귀중한 에너지 낭비 및 석유, 가스 등 발전용 화석연료 사용증가에 따른 환경오염을 유발하고 있다. LED(Light Emitting Diode. 발광다이오드)는 발광 특성상 열 발생이 적고, 특정 파장대의 단색광을 발광하는 광원으로써 전력소비가 매우 작고, 긴 수명, 양호한 환경 특성을 가지고 있다. 옥외에 노출되고, 점등이 길고 소등 횟수가 많으며 단색광을 필요로 하는 신호등에 적합한 것으로 평가되고 있다. 그러나 LED 신호등은 발광 원리 및 발광 방식이 기존의 전구식과 달라 현재 규정된 시험방법으로 직접 평가가 불가능하다. 따라서 우리나라의 경우 LED 제조기술은 세계적인 수준이나 LED 신호등에 대한 기술개발 및 보급은 현실적으로 어려운 실정이다. 본 논문에서는 국내 보급환경 구축을 위해 LED 신호등에 대한 시제품의 특성을 장시간의 옥외 시험을 통해 우리나라 환경 특성에 적합한 LED 교통 신호등 규격을 연구하고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.285-291
• /
• 2010

In this paper, we demonstrate that indoor wireless optical communication is possible with an LED and a solar cell. A lighting LED is used for lighting and signal transmission. A solar cell is used for collecting light energy and signal detection. This scheme is very useful because transmission is possible without any additional communication systems. In experiments, wireless optical communication was carried out at a data rate of 9.6 kbps using a lighting LED and a solar cell.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1967-1969
• /
• 2003

본 논문에서는 무인 주행 저속 전기 자동차 시스템 개발을 위한 적외선 LED 라인트레이서를 제작하였다. 햇빛에 의한 영향을 제거하기 위해 적외선 LED를 펄스(pulse)로 구동시켰으며 흰색선에서 반사된 적외선 신호를 photodiode를 이용하여 감지하였다. 감지된 신호는 증폭단과 Peak Detector를 거쳐 최종적으로 AVR MCU로 입력이 된 후 여러 상황에 따른 차량의 방향을 결정할 수 있도록 알고리즘를 통해 처리하였다. 실험을 통하여 본 논문에서 제작한 라이트레이서 모듈이 원하는 방향으로 동작함을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.6
• /
• pp.476-481
• /
• 2014

In this paper, we design the pre-equalizer of transmitter circuit in order to enhancement modulation bandwidth of white LED which is light source of VLC (Visible Light Communication). Also, we eliminate yellow light component by optical filtering which mitigate frequency response of white LED. Power loss by optical filtering is overcome by using convex lens. By applying proposed system, 3 dB bandwidth deciding modulation bandwidth of white LED increases from 3 MHz to more than 25 MHz and the transmission distance increases by optical design which secure additional signal power. We optically modulate NRZ-OOK signal to LED and receive light signal using APD. We analyze received data using CSA and RFSA. As a result, we experimently demonstrate the possibility that transmits NRZ-OOK signal up to 30 Mbps in 4.5 m, 50 Mbps in 1.5 m through the pre-equalizer and optical design.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.446-452
• /
• 2020

In this paper, we propose a energy-saving LED module using K-band microwave motion detecting sensor. To oscillate K-band microwave signal, An oscillator using a hairpin-type microstrip resonator was designed to increase stability and make fabrication easier. To radiate the microwave signal, a two-channel(TX/RX) patch antenna arrays was developed. Wilkinson power divider and ring hybrid mixer were developed and applied to obtain Doppler shift from the received signal. Shield cans were installed to protect the stability of the signals and unwanted external noise. The proposed motion detection sensor was mounted on a demonstration LED module and the energy saving performance through pre-test was verified.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.959-966
• /
• 2015

In this paper, we propose an indoor visible light communication(VLC) localization using Walsh code which can identify overlapped signals transmitted from the different LED sources as each of orthogonal signal at a receiver and using Manchester code which can eliminate the flicker of LED light and maintain a constant brightness. The proposed system can estimate the relative position of the receiver by using Lambertian radiation properties and trilateration method that are applied to the location information of fixed LED sources and the received signals from them. In order to verify the feasibility of the proposed system, we carried out the simulation in an indoor space with $6{\times}6{\times}1.5m^3$ installed LED lamps of 16. The simulation result shows that the proposed method achieves an average positioning error of 0.0536 m and a maximum positioning error of 0.2977 m.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1020-1026
• /
• 2012

In this paper, we proposed a RTOS-based lighting control system to improve energy efficiency. This proposed system, real time process was designed to the specified division of the LED streetlight control module for the RTOS-based lighting control into three different tasks. The first task transmits LED lighting signal by measuring illuminance, and the second task transmits motion detecting signal using motion detector. In the third task, lighting control to LED was designed through passed control signal from other tasks The execution status was examined ports that are directly to the ATmega128 MCU for the verification of the system, and illuminance distribution and operating conditions were verified through LED street field test. The proposed RTOS-based lighting control system has brought improving system performance and also facilitate an addition of other functions, and it was possible to optimize energy saving by intelligent lighting pattern control.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.75-80
• /
• 2013

In this paper, We proposed a Optical Correlation for indoor positioning based LED-ID. The proposed Optical Correlation has a advantage to low-interference between spread code number sequences and LED-ID. it is applied a spread code to reduce the interference with additional information based LED-ID. The additional information is enable to detect in transmitted signal using auto correlation. Also we designed and implemented the Optical Correlation for clearly detecting the additional information. Simulations were performed to confirm the performance of BER and the power of additional information. Optical Correlation simulator to indoor positioning based LED-ID was implemented to prove a usefulness.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.656-659
• /
• 2017

In this paper, we propose a digital method for transmitting audio signals using LED visible light communication system. In the proposed method, we compare the method for transmitting audio signal in analog signal and the method for transmitting by digital signal. When amplifying the audio sound and transmitting the analog signal using the LED visible light communication, attenuation corresponding to the transmission distance occurs, and there is a disadvantage that it is noisy. In order to overcome this, we propose a method for transmitting digital audio signals. The proposed method has the advantage of reducing the influence of noise, but it turned out that it is affected much by the LED blinking speed. Various methods to overcome this need to be continuously studied.