• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.3429-3434
• /
• 2014

TFT-LCD 패널 제조 산업에서 삼성전자는 후발기업으로써 선발기업인 일본의 샤프를 추월하여 선도하고 있다. 트리즈 시스템 분석을 활용하여 디스플레이 산업은 노트, 모니터, TV & 모바일 제품 시장으로 변화를 하였으며 시장(고객)의 요구속성도 변화를 함을 제시하였다. 또한 삼성의 TFT-LCD 기술 중 빠른 응답 기술 혁신 사례를 제시하였다. 예를 들면, 응답속도 개선을 위해 기존 사용하고 있는 액정 혼합물에 트리즈의 모순성, 물질-장 방법 등을 활용하여 개발된 고복굴절률 액정물질을 첨가하여 광시야 각, 빠른응답 특성을 갖는 신규 액정 혼합물을 개발하였다. 새로운 액정혼합물의 응답속도는 60%정도로 단축 개선되었다(기존 액정 사용 시 16 ms, 새로운 액정혼합물 사용 시 10ms).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.109-112
• /
• 1998

In this paper, we studied on electro-optical (EO) characteristics of photo-aligned twisted nematic (TN)-LCD. We obtained that uniform LC alignment in TN-LCD with linearly polarized ultraviolet (LPUV) light irradiation on polyimide (PI) surface increases according to increasing irradiation time for 10 to 60 min. The voltage-transmittance and response time characteristics of photo-aligned TN-LCD with UV light irradiation time of 60 min were almost same in comparison with conventional TN-LCD were observed. From the results, we suggest that photo-aligned TN-LCD with LPUV light irradiation on PI surface is useful in applying LCD as for rubbing-free treatment method.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.770-775
• /
• 2000

A new photo-polymer material of the copoly (PM4Ch-ChMA), copoly (poly (4-methacryloyloxy)chalcone-cholesteryl methacrylate) for homeotropic alignment was synthesized and the electro-optical (EO) performance for the photo-aligned vertical-aligned (VA)-LC display (LCD) was studied. Good thermal stabilities of synthesized copolymer were obtained by TGA(Thermogravimetric Analysis) measurement. Good voltage-transmittance (V-T) and response time characteristics for the photo-aligned VA-LCD with polarized UV exposure in oblique direction($\theta$$_{i}$=30$^{\circ}$) on a copolymer-1 (2%) surfaces for 1 min were observed. but, light leakage in the off-state was observed. Therefore, we achieved excellent V-T and response time characteristics for the photo-aligned VA-LCD with UV exposure on a copolymer-3 (30%) surfaces for 3 min.n.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.206-209
• /
• 2004

We investigated response characteristics of liquid crystal display(LCD) with different operating mode of nematic liquid crystals (NLCs) such as $45^{\circ}$twist nematic (TN), $67.3^{\circ}$TN and ECB(electrical controlled birefringence) on a rubbed polyimide (PI) surface. The three kinds of LCD operating mode obtain stable EO performance. Low transmittances of the $45^{\circ}$TN and $67.3^{\circ}$TN cell on the rubbed PI surface were achieved by using low cell gap d. The fast response time of ECB cell among the three kinds of LCD operating mode was measured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.113-116
• /
• 1998

In this paper, we studied the electro-optical(EO) performance of photo-aligned twisted nematic(TN)-liquid crystal display(LCD) with oblique non-polarized ultraviolet(UV) light irradiation on polyimide(Pl) surface. We observed that the voltage-transmittance and response time characteristics of photo-aligned TN-LCD is almost same compared to conventional TN-LCD. Also, we observed that the voltage-holding-ratio(VHR) of photo-aligned TN-LCD is almost same compared to conventional TN-LCD.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.205-208
• /
• 2004

The switching mechanism of multi-domain vertical alignment mode LCD and delayed on response time phenomenon in special conditions are investigated. A modified DCC (Dynamic Capacitance Compensation), DCCII has been developed for the fast response time performance in PVA TFT-LCD TVs. DCCII applies a pre-tilt voltage to addressed pixels during the previous frame in addition to an overshoot voltage. In result, the response time less than 8 msec, has been obtained for all moving images through the DCCII technique.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.87-90
• /
• 2009

A dual-cell-gap transflective liquid crystal display (TR-LCD) with identical response time in the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy condition is used to decrease the response time, while in the reflective region weak anchoring energy condition is used to increase the response time. The simulated dual-cell-gap TR-LCD has good performances.

• Transactions on Electrical and Electronic Materials
• /
• 제1권3호
• /
• pp.10-13
• /
• 2000

In this study the new photo-alignment material copoly(PM4Ch-ChMa)(copoly (poly (4-methancryloyloxy)chalcone-cholesteryl methacry late)) was synthesized, Also, the liquid crystal (LC) aligning capabilities and the electro-optical(EO) characteristics for the photo-aligned vertical-aligned(VA)-LC display(LCD) were studied. The monodomain alignment of the NLC for the photo-aligned VA-LCD by linearly polarized UB exposure on the Photo-dimerized copoly(PM4Ch-ChMA) surface was observed,. Excellent Voltage-transmittance characteristics for the VA-LCD photo-aligned by polarized UV exposure on the copoly (PM4Ch-ChMA) surfaces for 1 min was achieved. The response time of the VA-LCD photo-aligned by polarized UV exposure on the copoly (PM4Ch-ChMA) surfaces for 1 min was 39.3 ms, We suggest that the photo-dimerized chacone group increased with increasing UV exposure time, which then contributes to a low response time of the photo-aligned VA-LCD on the copoly (PM4Ch-ChMA) surfaces.

• 대한산업공학회지
• /
• 제29권1호
• /
• pp.1-13
• /
• 2003

In this paper, LAC(Look-ahead AGV Controller) has been developed for efficient routing of parts in semiconductor and LCD production systems. Several procedures have been developed as sub-modules. LACP(Look-ahead AGV Control Procedure) which controls AGVs using the information on the current and future status of the systems is the main element of the LAC. To support LACP, DSP(Destination Selection Procedure) which determines a destination of a part and AGV call time, SSP(Source Selection Procedure)which selects a part coming next to a buffer when the buffer becomes available. and RTM(Response Time Model) which estimates empty travel time of AGVs and waiting time for an available AGV have been developed. A simulation experiment shows that LAC reduces part's flow time, AGV utilization, average and maximum inventory level of a central buffer, empty travel time of an AGV, and waiting time for an available AGV.

• Transactions on Electrical and Electronic Materials
• /
• 제9권5호
• /
• pp.198-201
• /
• 2008

The electro-optical (EO) characteristics of the one-side rubbing twisted nematic (TN) - liquid crystal display (LCD) on the polyimide (PI) surface with one-side ion beam (IB) irradiation were successfully studied. The good LC alignment for the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation was observed. The suitable transmittance-voltage curves for the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation were measured. Also, the good response time characteristics of the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation were measured. The fast response time can be achieved for the one-side rubbing TN-LCD on the PI surface with one-side IB irradiation.