• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.726-735
• /
• 2014

In accordance with 4K UHD(Ultra High Definition) LCD television's higher resolution and data expansion, LCD TV had to face problems such as increasing numbers of cables and tangible skews problems among cables. The V-by-One HS is a new interface technology in the path between the image processing IC and timing control (TCON) board. The variable speed from 600 Mbps to 3.75 Gbps effectively meets the requirements of various different pixel rates. In this paper, we use the V-by-One HS interface to illustrate our proposed simulation method of frequency resonance mode and PCB design approach to model the effects of signal integrity for high speed video signal using an IBIS models.

• Electronics and Telecommunications Trends
• /
• v.28 no.5
• /
• pp.1-10
• /
• 2013

전자종이(e-Paper)는 일반 종이와 같이 자체 광원이 필요 없는 반사형(reflective, not emissive) 표시소자이면서, 기존 LCD에 비해 시야각 및 해상도가 우수하며, 백라이트가 필요 없고, 어떤 기판 위에서도 구현이 가능하며, 공정이 간단하여 Roll-to-Roll 공정을 통하여 적은 비용으로 대량생산을 할 수 있다. 본 보고서에서는 상기의 여러 가지 특징들을 가지고 있는 개념을 수용하여 기술개발 단계를 설명하고자 한다. 이를 바탕으로 현재 실용화 정도가 가장 진척된 전기영동방식의 전자종이의 컬러화 진행 현황에 대하여 국내외적인 연구현황을 상술하고자 한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.202-203
• /
• 2001

21세기 고도 정보화 사회는 실감형 3차원 입체 멀티미디어 서비스로 발전할 것으로 전망됨에 따라 3차원 입체 영상 디스플레이 기술에 대한 관심이 높아져서 국내외적으로 기술개발이 활발하게 진행되고 있다. 최근 3차원 영상 디스플레이 시스템을 구현하기 위해 입력이미지는 공간광변조기에 의해 디스플레이 되는데, 이때 사용될 수 있는 공간광변조기는 LCD, DMD,(deformable mirror device), MOD(magento optic device)등이 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.118-119
• /
• 2001

3차원 디스플레이 시스템에 대한 연구는 입체 영상이 높은 해상도와 넓은 시야각을 갖도록 하기 위하여 다양한 방식으로 활발히 진행되고 있다. 1908년 Lippmann에 의하여 제안된 Integral photography(IP)는 특별한 안경이 필요하지 않고 연속적인 시점을 제공한다는 장점을 갖고 있다. 제안된 당시에는 기록 및 재생 매체로 사진 건판을 사용하여 동영상의 재생이 불가능하였지만, 최근 사진 건판 대신 CCD 카메라와 LCD 패널을 기록 및 재생 매체로 사용함으로써 동영상이 가능한 IP 시스템이 제안되었다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.37-43
• /
• 2007

We developed the equipment to measure the MTF(modulation transfer function) of an optical system for automatically inspecting the surface condition of an LCD substrate. We have made an object generator with USAF(United States Air Force) targets of three bar patterns and an integrating sphere, and an image analyzer with a 2 dimensional CCD(charge coupled device) and a relay lens. The MTF of the lens under test was obtained by correcting the measured CTF(contrast transfer function) which is the ratio of the contrast in the image of the USAF target to the contrast in the object. We have measured an optical system of F/13.65 (2.6x), the MTF are 30.6 % tangential plane and 26.1 % sagittal plane at 62.5 1p/mm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3304-3310
• /
• 2010

This study solves the decision making problems for TFT-LCD manufacturing supply chain with demand and price uncertainties by establishing robust production and distribution strategies. In order to control the decisions regarding production graded by quality, inventory level and distribution, this study develop scenario model based stochastic mixed integer linear programs (SMILPs) that consider demand and price uncertainties as well as realistic constraints such as capacities etc. The performance of the solution obtained from the SMILPs using robust algorithms will be evaluated through various scenarios.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.923-927
• /
• 2010

본 연구는 가격 및 수요 불확실성하의 강건한 (robust) 생산 및 수송 전략을 수립함으로써 수요 및 가격 불확실성이 존재하는 TFT-LCD 제조업 공급사슬망의 의사결정 문제를 해결하고자 한다. 품질로 구분되는 제품들의 생산, 재고 및 물류에 관한 의사결정을 조정하기 위해, 본 연구에서는 생산용량 제약, 해상/항공 수송 리드타임 및 용량 제약 등의 현실적인 제약조건들 이외에 시나리오 모델을 이용하여 수요 및 가격 불확실성을 함께 반영하는 확률적 혼합정수선형계획법모형들을 개발한다. 또한 이들 모형들의 효율적 솔루션을 위해 제안한 휴리스틱 알고리즘의 성능을 평가하도록 한다.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.424-432
• /
• 2007

Luminance properties of external electrode fluorescent lamps and optical components in backlight unit (BLU) and optical transmission rates of optical sheets, are investigated for LCD-TV of 32" in diagonal with WXGA level resolution (1366$\times$768). The luminance is measured in 12-lamps and 18-lamps of BLU. The luminance uniformity preserves about 85 % in the 12-lamps backlight, while the luminance of optical components and the efficiency of backlight in the 12-lamps are lower than those in the 18-lamps backlight. When the lamp luminance in BLU having 12-lamps and 18-lamps is normalized as 100 %, the relative luminance of a diffusion plate, a diffusion sheet, a prism sheet (BEF), a polarization sheet (DBEF), has a constant value without dependence on a lamp luminance. The relative luminance of optical components in 12-lamps BLU is lower than that in 18-lamps backlight. The light transmission rate, the relative luminance of liquid crystal display panel with the luminance 100 % of backlight, is 7.14 % in the use of DBEF and BEF, 6.12 % in the use of only DBEF, and 3.21 % in the use of only BEF. Those Data obtained in this experiment for the lamps and optical components, are the design parameters for the LCD backlight.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.389-395
• /
• 2007

The Film X-ray and the CCD method of current medical image system have the disadvantages such as required large place and diagnosis time. In this paper, we implement an effective medical image system using TXT-DXD method's digital X-ray detector(DR1000C). The implemented medical image system has advantages of placing efficiency and short diagnosis time. In order to make the image out of the system more effective, we develop an LCD(Liquid Crystal Display) control driver, having the resolution of 1900*1200. And we propose an enhancement unsharp masking method to update image enhancement of DR1000C medical image system, and compare it with the current methods.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.2 s.8
• /
• pp.47-54
• /
• 1996

It needs more than two images which are obtained in real time to decide 3D positioning of dynamic object. Though we use digital camera which is became wide utilization, but it can't obtain sequential image. So, in this study, we constructed momentary image acquisition system using video camera. Also, we took a photograph of LCD timer and dynamic object together for real time stereo image, and we obtained independent digital image from sequential image using video editor. As a result of the study, we could obtain the independent image as true color digital image of $788{\times}550$pixels with 1/100sec accuracy in the same time. And it was good when we tested object target. For comparing 3D positioning accuracy, we could obtained negative with metric camera using B-shutter.