• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.433-435
• /
• 2005

We have studied the realigning behavior of liquid crystal molecules in liquid crystalline polymer/liquid crystal(LCP/LC) system when they are exposed to external stimulation such as bending and pressing. The birefringence of the LCP/LC in a flexible display device was measured as a function of bending or pressing deformation. The microscopic dynamic behavior of main chain, side chain, and the LC were characterized by FTIR and polarization optical microscopy. When the device is deformed in scattering memory state, liquid crystal(LC) director is found to align from randomly oriented domain state(scattering state) to homeotropic state.

• 한국전기전자재료학회논문지
• /
• 제16권2호
• /
• pp.131-137
• /
• 2003

We have performed computer simulation to obtain electro-optic chracteristics of reflective liquid crystal display (LCD) using wide viewing angle LC mode, fringe field switching(FFS). Unlike other reflective LCD modes, in the FFS mode, the LC director in plance so an application to reflective display consisted of polarizer, LC layer and reflector is possible. when an incident light is 550mm, the optimal cell retardation value is 0.1365${\mu}$m and the efficiency of reflectivity is high over 90% with very little wavelength dispersion. Further, we have studied a new reflective display with polarizer, optical compensation film with half plate, LC plus reflector. The display with optimized cell parameters shows high contrast ratio (CR) over 130 with high light efficiency over 90% at normal direction and the CR greater than 5 exists over 60$^{\circ}$ of polar angle in all directions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.764-767
• /
• 2005

Photoaligning polymers usually possess "sofe" surface, containing flexible groups and provide relatively small anchoring energy($W<10^{-2}$ erg $cm^{-2}$). In this case field-induced reorientation of director on the aligning surface is essential. We have shown that surface director reorientation can modify the aligning surface and result in gliding of the axis of easy orientation of LC. this phenomena together with adsorption/desorption of ions in electric field cause strong sticking effect in LCDs photoaligning materials. We proposed a method of decreasing of the sticking effect based on irradiation of the photoaligning surface by an unpolarized light.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.312-313
• /
• 2008

A transflective liquid crystal displays associated with fringe field switching (FFS) mode of new concept is proposed. The device utilizes unique characteristic of the FFS mode in which the rotation angle of LC director is strongly dependent on electrode position in on state. We use the liquid crystal with negative dielectric anisotropy. Also we are look for optimized electrode size and the optimization of pixel electrode width and distance between them, the LC director could rotate about $22.5^{\circ}$ and $45^{\circ}$ depending on electrode positions. Consequently, we get high transmittance and high reflection on the optimized electrode condition. Respectively, a high image quality transflective display with single gap and single gamma characteristics realized.

• 한국정보통신학회논문지
• /
• 제11권9호
• /
• pp.1724-1728
• /
• 2007

본 논문에서는 PVA(Patterned Vertical Alignment)액정 셀의 광투과율 향상을 위한 새로운 전극 구조를 제안하였다. 제안한 전극 구조의 액정 디렉터의 분포 및 광투과율 계산은 상용 시뮬레이터인 'TechWiz LCD'를 사용하였다. 광 시야각을 위한 전극구조에 의해 투과율 감소를 발생시키는 부분에 대해 연구하여 그 부분의 액정 디렉터 분포를 변화시킬 수 있는 구조를 제안하였다. 그리고 기존 PVA모드와 제안한 구조를 사용한 PVA모드의 광투과율을 계산하여 비교하였다. 그 결과로부터 제안한 PVA액정 셀의 광투과율이 높아짐을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.75-82
• /
• 2004

We have studied the influence of rubbing directions on electro-optic characteristics of the fringe field driven hybrid aligned nematic liquid crystal (LC) cell by computer simulation. When a LC with positive dielectric anisotropy is used, the results show that the driving voltage and transmittance decreases as the rubbing direction with respect to horizontal electric field direction increases. The reason for decrease in light transmission is the increase of tilt angle on the center of common electrode. In this paper, we have studied how the rubbing angle effects on the transmittance of the cell by investigating a distribution of electric field and LC director.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.957-960
• /
• 2003

We have studied the influence of rubbing directions on electro-optic characteristics of the fringe field driven hybrid aligned nematic liquid crystal (LC) cell by computer simulation. When a LC with positive dielectric anisotropy is used, the results show that the driving voltage and transmittance decreases as the rubbing direction with respect to horizontal electric field direction increases. The reason for decrease in light transmission is the reduction of twist angle and increase of tilt angle on the center of common electrode. In this paper, we have studied how the rubbing angle effects on the transmittance of the cell by investigating a distribution of electric field and LC director.

• Journal of Information Display
• /
• 제8권3호
• /
• pp.22-28
• /
• 2007

We reported the diffraction analysis of the liquid crystal (LC) binary gratings and the surface anchoring energies for planar and homeotropic alignments. The planar and homeotropic anchoring energies were directly derived based on the linearly distorted director distribution near domain boundaries, in which the distorted lengths correspond to the extrapolation lengths into both planar and homeotropic regions. From the diffraction analysis for the LC binary gratings with various grating periods based on the linearly graded phase model, both distorted lengths into planar and homeotropic regions were simultaneously obtained. In this work, the planar and homeotropic anchoring energies were found to be about $1.4\;{\times}\;10^{-4}\;J/m^2$ and $0.9\;{\times}\;10^{-5}\;J/m^2$, respectively.

• 폴리머
• /
• 제32권3호
• /
• pp.290-294
• /
• 2008

러빙한 고분자 필름이 액정 분자와 증착된 분자의 배향을 유도하는 메커니즘을 이해하고자 $\pi$ 전자들의 공액구조가 주사슬과 곁사슬에 각각 있는 polyimide와 polyyinylcinnamate를 사용하여 필름과 LC 셀을 만들어 편광 UV/Vis 분광실험으로 조사하였다. 러빙한 필름 내에 형성되는 이방성, LC 셀의 액정 방향자, 그리고 종착된 pentacene의 배열방향을 측정하여, 액정배향은 microgroove 영향보다는 분자간 상호작용에 의하여 우선적으로 유도되는 반면에 pentacene 증착의 경우에는 러빙에 의하여 형성된 필름 표면의 microgroove 영향으로 배향이 유도되는 것을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.501-509
• /
• 2003

We have designed transflective liquid crystal display(LCD) associated with in-plane switching of a LC director driven by fringe-field, unlike other LCD mode. Reflective area consists of a λ/2 compensation film and a LC cell with retardation value(dΔn) of λ/4 with their optic axes making an angle of 15$^{\circ}$ and 75$^{\circ}$ against polarizer, respectively. In the transmissive area, top and bottom polarizers are parallel each other, an LC has a dΔn of λ/2, and another λ/2 compensation film is inserted between the LC cell and bottom polarizer. With the configuration, both devices show dark state initially. When an incident light is 550nm, the device shows wide-viewing-angle characteristics such that in the reflective area the contrast ratio target than 5 exists up to 55$^{\circ}$ of polar angle in all directions and in transmissive area it exists about 100$^{\circ}$ in vortical direction and 110$^{\circ}$ in horizontal direction.