• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.619-623
• /
• 2018

Due to the development of society, the demand for electric power has increased and the quality control of electric power has become an important issue. In order to efficiently perform such power management, we propose a DSP based power measurement system for multi-wire power measurement. Since the conventional power measurement system can measure only the power of one line, a power quality measurement device is required for each line in order to measure the power quality of the individual line. Respectively. The system proposed in this paper proposes a system capable of real-time measurement of power quality at up to 12 points using digital signal processing algorithm, and the prototype based on this system was evaluated through the official test report of Korea Electrotechnology Research Institute. As a result of the performance test, it was evaluated that the error range is excellent at ${\pm}0.3%$.

• Wind and Structures
• /
• v.17 no.6
• /
• pp.647-670
• /
• 2013

The paper presents a numerical approach to study of fluid flow characteristics and to predict performance of wind turbines. The numerical model is based on Finite-volume method (FVM) discretization of unsteady Reynolds-averaged Navier-Stokes (URANS) equations. The movement of turbine blades is modeled using moving mesh technique. The turbulence is modeled using commonly used turbulence models: Renormalization Group (RNG) k-${\varepsilon}$ turbulence model and the standard k-${\varepsilon}$ and k-${\omega}$ turbulence models. The model is validated with the experimental data over a large range of tip-speed to wind ratio (TSR) and blade pitch angles. In order to demonstrate the use of numerical method as a tool for designing wind turbines, two dimensional (2-D) and three-dimensional (3-D) simulations are carried out to study the flow through a small scale Darrieus type H-rotor Vertical Axis Wind Turbine (VAWT). The flows predictions are used to determine the performance of the turbine. The turbine consists of 3-symmetrical NACA0022 blades. A number of simulations are performed for a range of approaching angles and wind speeds. This numerical study highlights the concerns with the self-starting capabilities of the present VAWT turbine. However results also indicate that self-starting capabilities of the turbine can be increased when the mounted angle of attack of the blades is increased. The 2-D simulations using the presented model can successfully be used at preliminary stage of turbine design to compare performance of the turbine for different design and operating parameters, whereas 3-D studies are preferred for the final design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.623-631
• /
• 2011

In this study, a new method which can detect incidents in interrupted traffic flow was suggested. The applied method of detecting the incident is the Latin Square Analysis Method by using traffic traits. In the Latin Square Analysis, unlike other previously tried methods, the traffic situation was analyzed, this time considering the changes in traffic traits for each lane and for each time period. The data used in this study were the data observed in the actual field with fine weather. The traffic volumes, the vehicle speed and the occupancy rate were collected on the interrupted flow road. The data were collected in normal and incident situations. The incidents occurred on the second lane, the time of persistent incidents was set to 10 minutes. The Latin Square Analyses were performed using the collected data with the traffic volume, with the vehicle speed or with the occupancy rate. As a result in this study, in case of detecting the traffic situations with Latin Square Analysis, it will be more successful to apply traffic volume to detect the traffic situations than to apply other factors.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.14-21
• /
• 2014

In this paper, we devise a new ontology-based context-aware system to recognize the smart car information, in which driver's intent is utilized by information of car, driver, environment as well as driving state, driver state. So proposed system can handle dynamically risk changes by adding real-time situational awareness information. We utilize the camera image recognition technology for context-aware intelligent vehicle driving information, and implement information acquisition scheme OBD-II protocol to acquire vehicle's information. Experiments confirm that the proposed advanced driver safety assist system outperforms the conventional system, which only utilizes the information of vehicle, driver, and environmental information, to support the service of a high-speed driving, lane-departure service and emergency braking situation awareness.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.3
• /
• pp.75-88
• /
• 1989

The state-of-art knowledge of highway performance analysis model was developed in this research and a computerized process named GUCAM(Geometric-specific User Cost Analysis Model) was established to facilitate the computational procedure. A comparison of GUCAM was made to HIAP program using a case study of widening two-lane rural highway into four-lane rural. The comparison indicated that GUCAM was more realistic and sensitive to the highway geometric features by virtue of the new methodology for the distribution of highway curves and grades. However, the model still remains insensitive to improvements at isolated locations such as specific grades or curves. Further research is required to straighten out this problem.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.83-91
• /
• 2012

This study deals with the operational efficiency of roundabout. The roundabouts generally have such the merits as high capacity, delay reduction, safety improvement, and others. Circular intersection can be divided into the rotary and roundabout according to travelling priority. The objective of this study is to comparatively analyze the operational efficiency of rotary and roundabout by scenario. In pursuing the above, this study gives the particular attentions to developing 256 scenarios according to the directional and entering traffic volume and analyzing the delay using VISSIM. The main results are as follows. First, the average delay of rotary was analyzed to be 1.56-8.74 times of roundabout. Second, the operational efficiencies of rotary and roundabout were analyzed to be better in the case of bigger differences in the traffic volumes between the main and minor roads. Third, the average delay of the 4-legged was evaluated to be 1.77-11.70 times of 3-legged intersection. Finally, 2-lane intersection (3-legged & 4-legged) was analyzed to be 2.02-2.23 times of 1-lane intersection.

• Journal of Korean Society of Transportation
• /
• v.25 no.1 s.94
• /
• pp.23-35
• /
• 2007

Freeway diverging areas are very vulnerable to traffic accidents due to abrupt vehicle speed changes and geometric changes. Therefore, in designing diverging areas, much attention should be Paid to safety The Present design criteria about freeway diverging areas regulate transition sections for lane changes, deceleration lanes, transition corves for direction changes. and other similar items. However, the design criteria were often violated in implementation because of ambiguities in the criteria. This study aims at clarifying and improving the present design criteria for freeway diverging areas. For this, field survey data and traffic accident data for diverging areas were analyzed.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.207-215
• /
• 2009

Generally, traffic accidents can be influenced by variables driving conditions including geometric, roadside design, and traffic conditions. Under the circumstance, homogeneous roadway segments were firstly identified using typical geometric variables obtained from field data collections in this study. These field data collections were conducted at highways located in several areas having various regional conditions for examples, outside metropolitan city; level and rolling rural areas. Due to many zero cells in crash database, a Zero Inflated Poisson model was used to develop crash prediction model to overestimated results in this study. It was found that EXPO, radius, grade, guardrail, mountainous terrain, crosswalk and bus-stop have statistically significant influence on vehicle to vehicle crashes at rural multi-lane roadway segments.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.19-31
• /
• 2008

Video image processing systems(VIPS) offer numerous benefits to transportation models and applications, due to their ability to monitor traffic in real time. VIPS based on wide-area detection, i.e., multi-lane surveillance algorithm provide traffic parameters with single camera such as flow and velocity, as well as occupancy and density. However, most current commercial VIPS utilize a tripwire detection algorithm that examines image intensity changes in the detection regions to indicate vehicle presence and passage, i.e., they do not identify individual vehicles as unique targets. If VIPS are developed to track individual vehicles and thus trace vehicle trajectories, many existing transportation models will benefit from more detailed information of individual vehicles. Furthermore, additional information obtained from the vehicle trajectories will improve incident detection by identifying lane change maneuvers and acceleration/deceleration patterns. The objective of this research was to relate traffic safety to VIPS tracking and this paper has developed a computer vision system of monitoring individual vehicle trajectories based on image processing, and offer the detailed information, for example, volumes, speed, and occupancy rate as well as traffic information via tripwire image detectors. Also the developed system has been verified by comparing with commercial VIP detectors.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.139-147
• /
• 2008

8 Exclusive Median Bus Lanes(EMBL) are operated in Seoul metropolitan city after the opening of Chon-ho section in 1996. But the changes in the road traffic demand on the direct and indirect influence area have not reported. In this paper, before and after survey and analysis of road traffic demand on 3 EMBLs opened in 2004 are conducted. In summary, the traffic demand of 3 EMBL road section decreased dramatically to 24.7% after the opening and then increased 1.4% after a year. The traffic demand of detour road decreased to 2.9% after the opening and then increased 0.3% after a year. Considering measurement error as ${\pm}5%$, Road traffic demands on the influence area of EMBL section are a stable state after one year. So it is presumed that the trip demand on EMBL section using vehicle does not make a detour around the influence area but divert into another transport modal.