• Journal of Astronomy and Space Sciences
• /
• 제29권3호
• /
• pp.321-328
• /
• 2012

We have designed a 30 cm cryogenic space infrared telescope for astronomical observation. The telescope is designed to observe in the wavelength range of 0.5~2.1 ${\mu}m$, when it is cooled down to 77 K. The result of the preliminary design of the support structure and support method of the mirror of a 30 cm cryogenic space infrared telescope is shown in this paper. As a Cassegrain prescription, the optical system of a 30 cm cryogenic space infrared telescope has a focal ratio of f/3.1 with a 300 mm primary mirror (M-1) and 113 mm secondary mirror (M-2). The material of the whole structure including mirrors is aluminum alloy (Al6061-T6). Flexures that can withstand random vibration were designed, and it was validated through opto-mechanical analysis that both primary and secondary mirrors, which are assembled in the support structure, meet the requirement of root mean square wavefront error < ${\lambda}/8$ for all gravity direction. Additionally, when the M-1 and flexures are assembled by bolts, the effect of thermal stress occurring from a stainless steel bolt when cooled and bolt torque on the M-1 was analyzed.

• 한국환경보건학회지
• /
• 제40권2호
• /
• pp.147-156
• /
• 2014

Objectives: This study was carried out to examine whether the apparent photolysis with or without sensitizers [NaOH and humic acid (HA)] was prompted photodegradation of polychlorinated biphenyl (PCB) in aqueous solution. Methods: PCBs photodegradation occurred using fluorescence black lamps at ${\lambda}_{max}=300nm$. PCB congeners were exposed in 10 ppm HA or 0.05N NaOH solutions, to investigate the decreasing profile of PCB concentration with time. The PCBs were then analyzed by gas chromatography/mass spectrometry (GC-MS). Reductive degradation profile of PCB congeners in the presence of both sensitizers under oxygen-saturated protic conditions was described using the wind-rose diagrams. Results: Use of HA or NaOH decreased PCB concentration with time in the dark and on irradiation, indicating that photolysis underwent through reductive dechlorination through energy transfer and possibly with reactive oxygens. The dechlorination was marked by a chromatographic shift, observed in the GC-MS plots. Therefore it is logical to assume that increasing the dose of sensitizers would increase the photodegradation rates of PCBs. The half-lives of pentachloro-PCB (penta-3) in 0.05N NaOH and 10 ppm HA were estimated at about 47 hours and 39 hours, respectively, under the same experimental conditions of photolysis. It was found that the rate of photolysis of pentachloro-PCB in aqueous solution followed apparent first-order kinetics compared to other congeners. Conclusion: Photochemical degradation (using 328 nm UV light) of penta- and hexa-PCBs in HA or alkaline solution is a viable method for pretreatment method. The results are helpful for the further comprehension of the reaction mechanism for photolytic dechlorination of PCBs in aquatic system.

• 한국조경학회지
• /
• 제33권4호
• /
• pp.97-107
• /
• 2005

This study was carried out to construct accurate and scientific system of assessment indicators in selection of National Trust conservation areas, which was new concept of domestic environment movement and offer the raw data of new analytic method by introducing the fuzzy theory and weight for overcoming the uncertainty of ranking decision. To transform the Likert's scale granted to assessment indicators into the type of triangular fuzzy number(a, b, c), there was conversion to each minimum(a), median(b), and maximum(c) in applying membership function, and in using the center of gravity and eigenvalue, there was to decide the ranking. The rankings of converted values applied a mean importance and weight were confirmed that they were generally changed. Therefore, the ranking decision was better to accomplish objective and rational ranking decision by applying weight that was calculated in grouping of indicator than to judge the singular concept and to be useful in assessment of diverse National Trust site. In the future, because AHP, which was general method of calculating weight, was lacked, there was to understand the critical point to fix a pertinent weight, and to carry out the study applying engineering concept like fuzzy integral using $\lambda-measure$.

• 연구논문집
• /
• 통권27호
• /
• pp.101-108
• /
• 1997

The characteristics of combustion and emissions in multi-staged oil burner have been experimentally studied for the various range of equivalence ratios, drop sizes and fuel formulations. Malvern system was used to measure droplet size of fuel. Light fuel oil and light fuel oil doped with pyridine($C_5H _5N$) were used to investigate the effects on fuel NOx emission. The emissions of NO and CO in exhaust gas and the flame temperatures were measured by the gas analyzer and thennocouples. NOx emissions were increased by increasing the excess air ratio (range:$lambda=1.1-1.4$) or decreasing the SMD of droplet in single-staged burner. In comparison with the single-staged burner, the emission of NOx in multi-staged burner was reduced by 50% but CO emission was slightly increased. It is found that multi-staged burner has a good capability in reducing thermal NOx resulting from the distributed heat release rate and lower flame temperature in fuel-rich and fuel-lean combustion zone. Moreover, the fuel NOx emission of the multi-staged burner is lower than that of single-staged burner, because multi-staged burner has fuel rich zone where fuel N is converted to $N_2$ more than NO. In 3-staged burner, the percentage of each stage combustion air have strong influence on emission characteristics. It is also found that NOx emission can be reduced by decreasing inner and outer air percentage or increasing middle air flow rate and CO emission is vice versa.

• 한국인터넷방송통신학회논문지
• /
• 제18권1호
• /
• pp.43-46
• /
• 2018

본 논문은 향상된 성능을 가진 개선 된 헤어핀 커플 링 구조인 스텝 임피던스 공진기 (SIR : Stepped Impedance Resonator)를 이용한 광대역 대역저지 여파기 (WBSF : Wide Band Stop Filter)를 설계하였다. SIR WBSF는 크기가 작고 탁월한 대역저지 특성을 갖는 장점이 있다. 설계된 BSF는 ${\lambda}/4$길이의 사각 모양의 헤어핀형을 입력과 출력 전송 라인 상측과 하측에 배치하여 대칭형이 되도록한 구조이다. 입출력 단자는시스템 응용을 위해 50 ohm으로 종단 되었다. SIR WBSF의 중심 주파수는 3.15 GHz의 제2 고조파 인 6.3 GHz이다. 설계된 여파기의 3dB 대역폭은 2.9 GHz이고 전송계수 ($S_{21}$)는 33.2 dB이다. 중심 주파수에서 반사계수 ($S_{11}$)은 0.106 dB이다. 응용분야는 육상고정 마이크로웨이브 중계국, 고정된 위성과 지구국, 고정 위성간 통신에 사용된다. 전체 크기는 $20mm{\times}10mm$이다.

• 한국전자파학회논문지
• /
• 제16권10호
• /
• pp.989-994
• /
• 2005

위성통신 시스템의 초고주파 스위치 메트릭스(MSM)를 위한 MMIC 스위치 칩을 InGaAs/GaAs p-HEMT 공정을 이용하여 설계 및 제작하였다. MMIC 스위치는 on과 off상태에서 우수한 입출력 반사계수를 위해 흡수형으로 설계되었다. 또한, 스위치 칩의 크기를 줄이기 위해 MIM 커패시터와 spiral 인덕터의 집중소자를 이용하여 3 GHz 대역에서의 ${\lambda}/4$ 임피던스 변환기를 구현하였다. 설계된 MMIC 스위치는 $3.2\~3.6\;GHz$ 대역에서 사용할 수 있으며 $1.6\;mm{\times}1.3\;mm$의 칩 크기를 갖는다. On-wafer 측정 결과, 2 dB 이하의 삽입 손실과 56.8 dB 이상의 격리도 특성을 나타내었다. 이와 같은 측정 결과는 시뮬레이션 결과와 잘 일치하는 것이다.

• 한국ITS학회 논문지
• /
• 제9권6호
• /
• pp.105-112
• /
• 2010

최근, 무선통신 시스템의 발전으로 다중대역을 위해 광대역에서 동작하는 회로들이 소개되었다. 하지만 광대역에서 동작하는 회로들은 필연적으로 크기가 증가하는 단점이 있다. 이중대역에서 동작하는 회로는 원하는 두 주파수에서만 동작하기 때문에 불필요한 소자들의 감소로 소형화가 가능하다. Wilkinson 전력 분배기는 무선통신시스템에서 전력분배를 위해 일반적으로 사용되는 소자로써, 이 또한 최근 이중대역이 요구되어지고 있다. 본 논문에서는 IEEE 802.11n WLAN을 위하여 2.45GHz와 5.2GHz에서 동작하는 소형화된 이중대역 Wilkinson 전력 분배기를 제안한다. 제안된 Wilkinson 전력 분배기는 일반적인 Wilkinson 전력분배기의 ${\lambda}$/4파장 부분을 ${\pi}$-형 병렬 스터브라인으로, 전기적 길이와 임피던스를 변환하여 수행되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.193-196
• /
• 2008

The vortical structures in a turbulent boundary layer (TBL) developed over a flat plate have been investigated experimentally. The flow conditions tested in this study were Re$_{\theta}$ = 3700, Re$_{\delta}$ = 11${\times}$105 and the shape factor H = 1.3. Instantaneous velocity fields in the streamwise-wall-normal planes were measured by using a dynamic PIV system. A trip-wire and sandpapers were placed behind the leading edge to promote the turbulent transition. 1000 velocity fields were obtained consecutively with a time interval of 1 millisecond. Streamwise u-velocity components were temporally averaged in the measuring plane. In addition, 2000 velocity fields were obtained randomly and ensemble-averaged to get the fully-developed turbulent characteristics. Profiles of the normalized u-component, turbulent intensities and Reynolds shear stress were evaluated. The structures of spanwise vortices were extracted from the instantaneous velocity fields by determining the swirling strength, ${\lambda}_{ci}$. The wall-normalized locations of vortices were temporally averaged in the measuring plane with respect to their rotational direction. The correlations between the temporally averaged u and the temporally averaged $y^+$ of vortices were evaluated. For the case of positive vortices, the correlation is not significant. However, the negative vortices show a strong negative correlation. The y-location of negative vortices tends to increase, as the averaged u decreases and vice versa. These findings indicate that the number of negative vortices in the outer layer increases during the outward bursting events.

• Fisheries and Aquatic Sciences
• /
• 제17권3호
• /
• pp.361-367
• /
• 2014

Cuttlefish Sepia esculenta are commercially important in Korea. Assessments of their biomass currently depend on fishery-landings data, which may be biased. Towards fishery-independent acoustic surveys of cuttlefish, target strength (TS) measurements at 70 and 120 kHz were made of 23 live cuttlefish, in early May 2010. The fish were caught by traps in the inshore waters around Geojedo, Korea. The TS were measured using split-beam echosounders (Simrad ES60 and EY500, respectively). The cuttlefish mantle lengths (L) ranged from 15.6 to 23.5 cm (mean L=17.8 cm) and their masses (W) ranged from 335 to 1020 g (mean W=556.1 g). Their mean TS values at 70 and 120 kHz were -33.01 dB (std=1.39 dB) and -31.76 dB (std=2.15 dB), respectively. The mean TS at 70 kHz was 0.17 dB higher than the TS-length relationship resulting from a least-squares fit to the data ($TS=24.67{\log}_{10}L(cm)-64.03$, $r^2$ = 0.52, N=23). The mean TS at 120 kHz was 0.45 dB higher than the fitted TS-length relationship ($TS=40.59{\log}_{10}L(cm)-82.96$, $r^2$ = 0.58, N=23). The differences between the mean TS values and an equation regressed from all of the TS measurements at both frequencies ($TS=24.92{\log}_{10}L(cm)-4.92{\log}_{10}{\lambda}(m)-22.82$, $r^2$ = 0.86, N=46) was 0.22 dB at 70 kHz and 0.31 dB at 120 kHz, respectively.

• 한국광학회지
• /
• 제7권2호
• /
• pp.129-135
• /
• 1996

고립전자쌍을 갖는 비정질 As$_{2}$S$_{3}$ 단층박막에서 처음으로 흡수형 광쌍안정현상을 관측하였다. 광원으로는 렌즈로 집속된 Ar$^{+}$ laser beam (.lambda.=514.5nm)을 사용하였다. 본 실험에서는 공진기가 없는 단층의 박막시료에서 시료의 흡수계수의 온도의존성에 의해 광쌍안정현상이 발생함을 알 수 있었고 이 효과는 물질내에서 흡수단의 가역적인 편이에 의해 설명되었다. 실험에서 광쌍안정조건은 매질의 초기흡수계수와 시료의 두께의 곱에 의해 결정되고 시료의 두께가 0.8.nu.m일 때 이 값은 약 0.12임을 알 수 있었다. 또한 입사 레이저광세기가 150-180mW일 때 스위칭이 뚜렷했고 스위칭시간은 약 $10^{-4}$초였다.