• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.279-284
• /
• 2016

This paper presents a two stage L-band power amplifier realized with a $0.32{\mu}m$ Silicon-On-Insulator (SOI) CMOS technology. To overcome a low breakdown voltage limit of MOSFET, stacked-FET structures are employed, where three transistors in the first stage amplifier and four transistors in the second stage amplifier are connected in series so that their output voltage swings are added in phase. The stacked-FET structures enable the proposed amplifier to achieve a 21.5 dB small-signal gain and 15.7 dBm output 1-dB compression power at 1.9 GHz with a 122 mA DC current from a 4 V supply. The amplifier delivers a 19.7 dBm. This paper presents a two stage L-band power amplifier realized with a $0.32{\mu}m$ Silicon-On-Insulator (SOI) CMOS technology. To overcome a low breakdown voltage limit of MOSFET, stacked-FET structures are employed, where three transistors in the first stage amplifier and four transistors in the second stage amplifier are connected in series so that their output voltage swings are added in phase. The stacked-FET structures enable the proposed amplifier to achieve a 21.5 dB small-signal gain and 15.7 dBm output 1-dB compression power at 1.9 GHz with a 122 mA DC current from a 4 V supply. The amplifier delivers a 19.7 dBm saturated output power with a 16 % maximum Power Added Efficiency (PAE). A bond wire fine tuning technology enables the amplifier a 23.67 dBm saturated output power with a 20.4 % maximum PAE. The die area is $1.9mm{\times}0.6mm$.

• Journal of Pharmacopuncture
• /
• v.6 no.1
• /
• pp.19-32
• /
• 2003

Objective : This study is perfonned for the purpose of examining the efficacy of the scolopendrid (Scolopendra morsitans L.) which has been used to low back pain as a folk remedy. Methods & Results : Seventy patients with H.I.V.D. treated with the scolopendrid aquacupuncture and examined 4 tests; D.I.T.L., physical test, Oswestry disability index, and self-conscious pain rate were studied. There was $50{\sim}100\%$ of efficacy rate in each tests. Moreover, statistically valuable change in 5 to 7 D.I.T.I. points and in self-conscious pain rate was showed. Conclusion : The scolopendrid aquacupuncture is possible to be effective treating the H.I.V.D patients. So we suggest the possibility using this new remedy to the H.I.V.D. patients.

• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.15-19
• /
• 1983

To establish the stand volume table of Pinus koraiensis S. et Z. and Larix leptolepsis Gord. mean diameter at breast height (D), mean height, basal area per ha, stand from height (H.F), basal area height, number of trees per ha, volume per ha, stand age and site were investigated for 107 plots of P. koraiensis and 82 plots of L. leptolepsis throughout the country. The obtained results are as follows; 1) the relationships between stand volume (V) and H.F. were log V=1.3855+0.1168 H.F and log V+0.9929+0.1543 H.F in P. koraiensis and L. leptolepsis, respectively. 2) The relationship between D and H.F was estimated as H.F = 1.2569+0.2576D for P. koraiensis and as H.F = 4.3045+0.1443D for L. leptolepsis 3) Estimated errors calculated with the application of these stand volume tables were 18.29% and 19.22%r for P. koraiensis and L. leptolepsis respectively.

• Explosives and Blasting
• /
• v.9 no.1
• /
• pp.3-13
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ${\phi}70mm$ on the calcalious sand stone (soft -modelate -semi hard Rock). The total numbers of test blast were 88. Scale distance were induced 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ were V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum charge per delay-period of eight milliseconds or more (kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents where the quantity $\frac{D}{W^b}$ is known as the scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagorized in three groups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge Per delay Plots of peak particle velocity versus distoance were made on log-log coordinates. The data are grouped by test and P.P.V. The linear grouping of the data permits their representation by an equation of the form ; $V=K(\frac{D}{W^{\frac{1}{3}})^{-n}$ The value of K(41 or 124) and n(1.41 or 1.66) were determined for each set of data by the method of least squores. Statistical tests showed that a common slope, n, could be used for all data of a given components. Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m ------- under l00m ${\cdots\cdots\cdots}{\;}41(D/sqrt[2]{W})^{-1.41}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}A$ Over 100m ${\cdots\cdots\cdots\cdots\cdots}{\;}121(D/sqrt[3]{W})^{-1.66}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}B$ where ; V is peak particle velocity In cm / sec D is distance in m and W, maximLlm charge weight per day in kg K value on the above equation has to be more specified for further understaring about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2299-2303
• /
• 2014

Two diastereoisomers of cyclo(Pro-Tyr) have been synthesized simultaneously. The crystal structures and conformations of both cyclo($\small{L}$-Pro-$\small{L}$-Tyr) and a racemic mixture of cyclo($\small{D}$-Pro-$\small{L}$-Tyr) and cyclo($\small{L}$-Pro-$\small{D}$-Tyr), abbreviated as rac-cyclo($\small{D}$-Pro-$\small{L}$-Tyr/$\small{L}$-Pro-$\small{D}$-Tyr), have been determined by a single-crystal X-ray diffraction study at low temperature. The crystals of rac-cyclo($\small{D}$-Pro-$\small{L}$-Tyr/$\small{L}$-Pro-$\small{D}$-Tyr) belong to orthorhombic space group $Pna2_1$ with a = 10.755 (1), b = 12.699 (1), c = 9.600 (1) ${\AA}$ and Z = 4. The tyrosine side chain is folded towards the diketopiperazine (DKP) ring. The DKP ring adopts a twist boat conformation with pseudo symmetry $C_{2v}$. The pyrrolidine ring has an envelope conformation with the N5, C4, C7 and C8 atoms in a plane. The crystal of rac-cyclo($\small{D}$-Pro-$\small{L}$-Tyr/$\small{L}$-Pro-$\small{D}$-Tyr) is stabilized by hydrogen bonds between amide N2-H2 and carbonyl oxygen O2 in the neighbor. The hydroxyl group of tyrosine residue is also hydrogen bonded to the oxygen of the carbonyl group of the DKP ring in the next molecule. The spectroscopic properties of both isomers are also described.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.2
• /
• pp.165-173
• /
• 2019

Lithium anodes (13, 15, 17, and 20 wt% Li) were fabricated by mixing molten lithium and iron powder, which was used as a binder to hold the molten lithium, at about $500^{\circ}C$ (discharge temp.). In this study, the effect of applied pressure and lithium content on the discharge properties of a thermal battery's single cell was investigated. A single cell using a Li anode with a lithium content of less than 15 wt% presented reliable performance without any abrupt voltage drop resulting from molten lithium leakage under an applied pressure of less than $6kgf/cm^2$. Furthermore, it was confirmed that even when the solid electrolyte is thinner, the Li anode of the single cell normally discharges well without a deterioration in performance. The Li anode of the single cell presented a significantly improved open-circuit voltage of 2.06 V, compared to that of a Li-Si anode (1.93 V). The cut-off voltage and specific capacity were 1.83 V and $1,380As\;g^{-1}$ (Li anode), and 1.72 V and $1,364As\;g^{-1}$ (Li-Si anode). Additionally, the Li anode exhibited a stable and flat discharge curve until 1.83 V because of the absence of phase change phenomena of Li metal and a subsequent rapid voltage drop below 1.83 V due to the complete depletion of Li at the end state of discharge. On the other hand, the voltage of the Li-Si anode cell decreased in steps, $1.93V{\rightarrow}1.72V(Li_{13}Si_4{\rightarrow}Li_7Si_3){\rightarrow}1.65V(Li_7Si_3{\rightarrow}Li_{12}Si_7)$, according to the Li-Si phase changes during the discharge reaction. The energy density of the Li anode cell was $807.1Wh\;l^{-1}$, which was about 50% higher than that of the Li-Si cell ($522.2Wh\;l^{-1}$).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.471-482
• /
• 2015

In this paper, design and implementation of the 94 GHz Gunn oscillator and the evaluation of the maximum power of the Gunn diode used in the oscillator are presented. The 94 GHz Gunn oscillator is used InP Gunn diode and designed employing a WR-10 waveguide. The designed oscillator is fabricated through machining and its performance is measured. The fabricated oscillator shows an oscillation frequency of 95 GHz, output power of 12.64 dBm, and phase noise of -92.7 dBc/Hz at 1 MHz offset frequency. To evaluation the maximum power of the InP Gunn diode used in oscillator, the oscillator structure is modified to a structure having a diaphram. The height of thick diaphram which is used in the oscillator is varied. As a result, an oscillator has several different load impedances, which makes it possible to plot $G_L-V^2$ plot at the post plane. Using the $G_L-V^2$ plot, the maximum power of used Gunn diode including post is computed to be 16.8 dBm. Furthermore using the shorted and zero bias Gunn diode, the post loss used for DC biasing can be computed. Using the two losses, The maximum power of a InP Gunn diode is computed to be 18.55 dBm at 95 GHz. This result is close to a datasheet.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.2
• /
• pp.123-128
• /
• 2000

This study was carried out to determine factors affecting on the mass propagation of Rehmannia glutinosa seedlings in bioreactor culture. Air-lift type bioreactor was more compatible to shoot formation than stirrer type. Fifty grams(90 stem explants) of inoculum in 1.5L medium was placed into 2.5L bioreactor with aeration rate of 0.5 v.v.m., which was proper for effective shoot formation. Adding MES as pH buffer to culture medium increased the numbers of shoot formation. Adding 5g/l of anti-vitrifying agent into culture medium was highly effective for diminishing the rate of vitrification in shoots formed.

• Communications of the Korean Mathematical Society
• /
• v.33 no.1
• /
• pp.361-369
• /
• 2018

For a given graph G = (V, E), a set $D{\subseteq}V(G)$ is said to be an outer-connected vertex edge dominating set if D is a vertex edge dominating set and the graph $G{\backslash}D$ is connected. The outer-connected vertex edge domination number of a graph G, denoted by ${\gamma}^{oc}_{ve}(G)$, is the cardinality of a minimum outer connected vertex edge dominating set of G. We characterize trees T of order n with l leaves, s support vertices, for which ${\gamma}^{oc}_{ve}(T)=(n-l+s+1)/3$ and also characterize trees with equal domination number and outer-connected vertex edge domination number.

• Honam Mathematical Journal
• /
• v.38 no.2
• /
• pp.243-257
• /
• 2016

If we let $L(2K;n):=\sum_{s=0}^{k-1}(^{2k}_{2s+1})\sum_{m=1}^{n-1}{\sigma}_{2k-2s-1,1}(m;2){\sigma}_{2s+1,1}(n-m;2)$ with $${\sigma}_{k,l}(n;2):=\sum\limits_{{d{\mid}n}\atop{d{\equiv}l(mod2)}}d^k$$, then we get the formula of L(2u; p)L(2v; p)L(2w; p).