• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.2199-2206
• /
• 2014

본 연구는 자기공명 견관절조영검사 시 단위 부피당 가돌리늄 함유량이 2배 많은 1mmol/mL 조영제를 이용하여 T1 단축효과를 높임으로서 진단적 가치가 높은 영상을 얻을 수 있는 방법을 증명하고자 하였다. 2012년 1월부터 2013년 8월까지 0.5mmol/mL 함유량을 가진 기존의 조영제를 사용한 20명과 1mmol/mL 함유량을 가진 새로운 조영제를 사용한 21명 등 총 41명의 환자를 연구대상으로 하였다. 연구방법은 가돌리늄 함유량에 따른 대조도 차이를 알아보기 위하여, 견관절의 관절공간과 인접한 근육조직인 극상근, 그리고 상완골두의 신호강도를 각각 측정한 후 신호대잡음비와 대조도대잡음비를 비교하였다. 연구 결과, 가돌리늄 함유량이 높은 1mmol/mL 조영제가 0.5mmol/mL 조영제에 비해 SNR이 모두 높았으며(관절공간 38.01%, 극상근 8.40%, 상완골두12.78%), CNR도 가돌리늄 함유량이 높은 1mmol/mL 조영제가 높았다(관절공간과 극상근 48.96%, 관절공간과 상완골두 42.00%). 결론적으로 T1 단축효과를 높이는 다양한 방법 중 현실적으로 구현하기 용이한 가돌리늄 함유량이 높은 1mmol/mL 조영제를 이용하면 효율적으로 T1 단축효과를 높여 진단적 가치가 높은 영상을 얻을 수 있을 것으로 판단된다.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.16-21
• /
• 2012

Magnesium alloy has been focussed as lightweight material owing to its high strength even though low density with aluminum alloy, titanium alloy and plastic material. Friction stir welding technique was performed by rotating and plunging a shouldered tool with a small diameter pin into the joint line between two butted plates and useful to join magnesium alloy. In this paper, the experiments of friction stir welding were done to investigate the joint characteristics of AZ31 magnesium alloy. For its evaluation, the orthogonal array method$(L_{27}(3^{13}))$ was applied with four factors of pin diameter, shoulder diameter, travel speed and rotation speed of tool and also three levels of each factor. Nine tools were worked through shoulder diameter of 9, 12, 15mm and pin root diameter of 3, 4, 5mm. In addition tensile tests were excuted for the assessment of mechanical properties for joint conditions. From the results, pin diameter, shoulder diameter, and rotating speed of tool influenced on the tensile strength meaningful, but welding speed did not influence on that by the variance analysis. Beside of that, optimum condition of tensile strength was estimated as following ; shoulder diameter:15mm, welding speed:200mm/min, rotating speed:200rpm.

• Clinics in Shoulder and Elbow
• /
• 제25권3호
• /
• pp.230-235
• /
• 2022

Background: Unstable distal clavicles experience high non-union rates, prompting surgeons to recommend surgery for more predictable outcomes. There is a lack of consensus on the optimal method of surgical fixation, with an array of techniques described in the literature. We describe an alternative method of fixation involving the use of a distal clavicular anatomical locking plate with Fibertape cerclage augmentation in our series of patients. Methods: Nine patients (8 males and 1 female), with a mean age of 36 years, who sustained unstable fracture of the distal clavicle in our institution were treated with our described technique. Postoperative range of motion, functional and pain scores, and time to radiographic union were measured over a mean follow-up period of 10 months. Incidences of postoperative complications were also recorded. Results: At the last patient consult, the mean visual analog scale score was 0.88±0.35, with a mean Disabilities of the Arm, Shoulder, and Hand (DASH) score of 1.46±0.87 and American Shoulder and Elbow Surgeons (ASES) score of 94.1±3.57. The mean range of motion achieved was forward flexion at 173°±10.6°, abduction at 173°±10.6°, and external rotation at 74.4°±10.5°. All patients achieved internal rotation at a vertebral height of at least L2 with radiographical union at a mean of 10 weeks. No removal of implants was required. Conclusions: Our described technique of augmented fixation of the distal clavicle is effective, produces good clinical outcomes, and has minimal complications.

• 복식문화연구
• /
• 제26권1호
• /
• pp.30-44
• /
• 2018

The study purpose was to investigate the jacket-fit satisfaction level of men in their 20s and 30s, using body-scanning data and a questionnaire. Thirty-five men were scanned using a 3D body scanner. The participants were divided into three groups (Small, Medium, and Large) based on their chest-circumference measurement. Their levels of satisfaction with the fit of their tailored jacket were compared by group. Chest, waist, and hip circumferences increased substantially as group size increased. The M-group was mostly satisfied with all body-site views. The S-group was especially dissatisfied with height, back width, waist circumference, and upper-arm circumference. The L-group was especially dissatisfied with waist circumference and hip circumference. The majority of the participants preferred the jacket closely fitted to their body. More than half of the participants thought finding a jacket of suitable size was difficult. When purchasing ready-to-wear jackets, the S-group and the M-group considered shoulder width important, while the L-group considered chest circumference the most important area. When evaluating the fit of ready-to-wear jackets, the L-group evaluated chest circumference, back width, and waist circumference as poor fits. The M-group evaluated sleeve length and shoulder width as poor fits, and the S-group agreed with respect to sleeve length. Body-satisfaction levels and matching jacket-satisfaction levels differed by body-size group, as did areas that need improvement. The conclusion is that size-group analysis using 3D body scanning can be utilized effectively for jacket-fit analysis. The findings of the current study can be applied to improving jacket fit among young male consumers.

• 한국전문물리치료학회지
• /
• 제13권4호
• /
• pp.39-46
• /
• 2006

The purpose of this study was to determine the effects of slump sitting postures on the masticatory, neck, shoulder, and trunk muscles associated with work-related musculoskeletal disorders (WRMD). Eleven healthy adults (age, $23.3{\pm}2.7$ yrs; height, $174.0{\pm}4.1$ cm; weight, $61.4{\pm}6.6$ kg) participated in this study. The participants were free of injury history and neurologic deficits in the masticatory, neck muscles and upper extremities at the time of participation. The subjects were asked to perform erect and slump sitting postures under the guidance of physical therapists. The surface electromyography (EMG) was recorded from the anterior temporalis, masseter, upper trapezius, serratus anterior, middle trapezius, L3 paraspinal, external abdominal oblique, gluteus maximus muscles of 11 adults as they performed visual terminal display work, which are known as the weakened and tightened muscles owing to WRMD. The recorded signals were averaged and normalized to the mean amplitude of the EMG signal obtained during submaximal reference voluntary contractions. The results of study were as follows: The masseter, upper trapezius, serratus anterior, middle trapezius, L3 paraspinal, external abdominal oblique muscles significantly differed in the slump sitting posture (p<.05). The muscle activities of the serratus anterior, middle trapezius muscle, and external abdominal oblique were significantly lower and that of the masseter, upper trapezius, L3 paraspinal muscles were significantly higher. Further research is needed to assess the motor control problems and the function of the deep muscles in posture stability of patients with WRMD.

• 대한산업공학회지
• /
• 제25권3호
• /
• pp.393-403
• /
• 1999

In this research, a reach posture prediction based on a two-segment trunk model was made. Recently, reach posture prediction models have used inverse kinematics to provide a single posture that a person naturally takes, with a single segment trunk model that had some shortcomings. A two-segment trunk model was first developed with two links; pelvis link and lumbar-thoracic link. The former refers to the link from the hip joint to L5/S1 joint while the latter does the link from L5/S1 to the shoulder joint. Second, a reach prediction model was developed using the two-segment trunk model. As a result, more reliable equations for two-segment trunk motion were obtained, and the lean direction which refers to the movement direction of the trunk was not found to have a significant effect on the two-segment trunk motion. The results also showed that the hip joint is more preferred over L5/S1 to serve as a reference point for trunk models and the reach prediction model being developed predicted the real posture accurately.

• 한국안전학회지
• /
• 제10권4호
• /
• pp.103-108
• /
• 1995

This study was performed to investigate a relationship between a biomechanical analysis of compressive force at L5/S1 and electromyographic analysis of erector spinae muscle during lifting task. In the experiment, isometric contractions at 25, 50, 75, 100%MVC for short duration and sustained isometric contractions at 50%MVC were performed. For muscle recruitment patten and compressive force analysis, rectified EMG amplitudes analysis and computerized biomechanical analysis were used. To achieve data, angles of neck, shoulder, elbow, wrist, hip, knee, ankle and length of body segments were measured. Results shows that trends of initial EMG rectified amplitude were similar to those of biomechanical calculation value and for sustained isometric contraction at 50%MVC EMG rectified amplitude of erector spinae muscle after 40seconds was increased up to level of 75%MVC. Based on the results of this study, biomechanical analysis should be supplemented considering muscle fatigue, and it is also suggested that work-rest cycle critera and the evaluation of back-pain injuries should include muscle fatigue.

• Clinics in Shoulder and Elbow
• /
• 제9권2호
• /
• pp.169-175
• /
• 2006

Purpose: The purpose of this study was to evaluate the usefullness of polarus nailing in the treatment of proximal humerus fractures including 2 part, 3 part and proximal comminuted fractures. Materials and methods: Fifteen cases of proximal humerus fracture treated with Polarus nailing from March, 2002 to March, 2004 were selected. Man was 3 cases, and woman was 11 cases. There were one case of follow up loss due to decease. Average age was 60 years old (range, 23 to 84), and there were 6 cases of 2 part fracture, 3 cases of proximal segmental fracture, 5 cases of 3 part fracture. We analyzed the outcom results between 2 part fracture and 3 part fracture. The average follow up period after the operation was 1.5(range, 1 to 2) years. Range of motion (ROM), pain and functional outcome were evaluated by visual analogue scale(VAS) and american shoulder and elbow surgery (ASES) activity of daily living (ADL) functional scoring system. Results: All cases showed union on radiologic evaluation, with 2.3 months follow up. In 5 cases of 3 part fracture, average union time was 1.9 months regardless of proximal screw loosening in 4 cases. In 2 part fracture union time was 2.2 months (P>0.05). VAS pain score was 1.3, ROM was $160^{\circ}$ in forward flexion, $40^{\circ}$ in external rotation, L3 level in internal rotation, and ASES, ADL functional score was 21 in 2 part fracture. VAS pain score was 1.25, ROM was $160^{\circ}$, $43^{\circ}$ and L1 level, and ASES, ADL functional score was 21 in 3 part fracture. There were no statistically significant difference between two groups (P>0.05) VAS pain score was 1.6, ROM was $170^{\circ}$, $47^{\circ}$ and L3 level, and ASES, ADL functional score was 23 in proximal comminuted fracture. Conclusion: Polarus nailing could be used as an effective modality in certain cases of proximal humeral fracture including 2 part, proximal segmental and in cases of 3 part fractures with large greater tuberosity fragment.

• Clinics in Shoulder and Elbow
• /
• 제26권3호
• /
• pp.231-237
• /
• 2023

Background: In the past decade, the number of anatomic total shoulder arthroplasty (aTSA) procedures has steadily increased. Patients over 65 years of age comprise the vast majority of recipients, and outcomes have been well documented; however, patients are opting for definitive surgical treatment at younger ages.We aim to report on the effects of age on the long-term clinical outcomes following aTSA. Methods: Among the patients who underwent TSA, 119 shoulders were retrospectively analyzed. Preoperative and postoperative clinical outcome data were collected. Linear regression analysis (univariate and multivariate) was conducted to evaluate the associations of clinical outcomes with age. Kaplan-Meier curves and Cox regression analyses were performed to evaluate implant survival. Results: At final follow-up, patients of all ages undergoing aTSA experienced significant and sustained improvements in all primary outcome measures compared with preoperative values. Based on multivariate analysis, age at the time of surgery was a significant predictor of postoperative outcomes. Excellent implant survival was observed over the course of this study, and Cox regression survival analysis indicated age and sex to not be associated with an increased risk of implant failure. Conclusions: When controlling for sex and follow-up duration, older age was associated with significantly better patient-reported outcome measures. Despite this difference, we noted no significant effects on range of motion or implant survival. Level of evidence: IV.

• Clinics in Shoulder and Elbow
• /
• 제20권4호
• /
• pp.217-221
• /
• 2017

Background: The purpose of this study was to evaluate the clinical and radiographic outcomes of internal fixation with locking T-plates for osteoporotic fractures of the proximal humerus in patients aged 65 years and older. Methods: From January 2007 through to December 2015, we recruited 47 patients aged 65 years and older with osteoporotic fractures of the proximal humerus. All fractures had been treated using open reduction and internal fixation with a locking T-plate. We classified the fractures in accordance to the Neer classification system; At the final follow-up, the indicators of clinical outcome-the range of motion of the shoulder (flexion, internal rotation, and external rotation) and the presence of postoperative complications-and the indicators of radiographic outcome-the time-to-union and the neck-shaft angle of the proximal humerus-were evaluated. The Paavolainen method was used to grade the level of radiological outcome in the patients. Results: The mean flexion was $155.0^{\circ}$ (range, $90^{\circ}-180^{\circ}$), the mean internal rotation was T8 (range, T6-L2), and the mean external rotation was $66.8^{\circ}$ (range, $30^{\circ}-80^{\circ}$). Postoperative complications, such as plate impingement, screw loosening, and varus malunion were observed in five patient. We found that all patients achieved bone union, and the mean time-to-union was 13.5 weeks of the treatment. The mean neck-shaft angle was $131.4^{\circ}$ at the 6-month follow-up. According to the Paavolainen method, "good" and "fair" radiographic results each accounted for 38 and 9 of the total patients, respectively. Conclusions: We concluded that locking T-plate fixation leads to satisfactory clinical and radiological outcomes in elderly patients with proximal humeral fractures by providing a larger surface area of contact with the fracture and a more rigid fixation.