• Title/Summary/Keyword: L-flat

Search Result 495, Processing Time 0.029 seconds

Seismic Performance of Gravity-Load Designed Post-Tensioned Flat Plate Frames (중력하중으로 설계된 포스트텐션 플랫플레이트 골조의 내진성능)

  • Han, Sang-Whan;Park, Young-Mi;Rew, Youn-Ho
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.14 no.3
    • /
    • pp.31-38
    • /
    • 2010
  • The purpose of this study is to evaluate the seismic performance of gravity-designed post tensioned (PT) flat plate frames with and without slab bottom reinforcement passing through the column. In low and moderate seismic regions, buildings are often designed considering only gravity loads. This study focuses on the seismic performance of gravity load designed PT flat plate frames. For this purpose, 3-, 6- and 9-story PT flat plate frames are designed considering only gravity loads. For reinforced concrete flat plate frames, continuous slab bottom reinforcement (integrity reinforcement) passing through the column should be placed to prevent progressive collapse; however, for the PT flat plate frames, the slab bottom reinforcement is often omitted since the requirement for the slab bottom reinforcement for PT flat plates is not clearly specified in ACI 318-08. This study evaluates the seismic performance of the model frames, which was evaluated by conducting nonlinear time history analyses. For conducting nonlinear time history analyses, six sets of ground motions are used as input ground motions, which represent two different hazard levels (return periods of 475 and 2475 years) and three different locations (Boston, Seattle, and L.A.). This study shows that gravity designed PT flat plate frames have some seismic resistance. In addition, the seismic performance of PT flat plate frames is significantly improved by the placement of slab bottom reinforcement passing through the column.

Membrane Fouling Models for Activated Sludge Cakes (활성슬러지 케이크의 분리막 오염 모델)

  • Kim, Dae Chun;Chung, Kun Yong
    • Membrane Journal
    • /
    • v.24 no.3
    • /
    • pp.249-257
    • /
    • 2014
  • This experiment was carried out for a laboratory scale activated sludge bioreactor equipped with submerged flat sheet membrane using the synthetic wastewater. The membrane system for the activated sludge solution of MLSS 5,000 mg/L was operated with constant permeate flux by continuously permeating and periodically 10 minute-permeating/2 minute-resting modes, respectively. The transmembrane pressure was measured as the permeate flux increased from 10 to $25L/m^2{\cdot}hr$ under the constant air flowrate 0.25 L/min. Also, the complete blocking, standard blocking, intermediate blocking, incompressible cake and linear compressible cake fouling models were retrofitted for the experimental data in order to determine the state of the membrane fouling. Because the transmembrane pressure fluctuated as a pulse shape for every period of 10 minute-permeating/2-minute resting mode, the membrane fouling models were separately applied for the maximum and minimum connecting lines. The linear compressible cake fouling model for the activated sludge cakes was the best fitted with the experimental results from the above five models.

The Evaluation of the Water Quality in Coastal Boundary on Tidal flat (통계분석기법을 이용한 전남 갯벌 해역 수질특성)

  • Jun, Sue-Kyung;Kim, Chong-Ki;Kim, Yun
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.14 no.1
    • /
    • pp.1-10
    • /
    • 2011
  • To understand characteristics of the water quality on the coastal boundary on tidal flat, field observations between 2008 and 2009 were undertaken twice a month at five coastal areas (Muan bay, Tando bay, Hampyeong bay, Shinan Jido and Yeongkwang coastal areas). Yearly water temperature difference was large with the range between $1.3^{\circ}C$ and $31.1^{\circ}C$. Salinity was about 32 but was the lower less than 20 for the heavy rainfall season. DO was high in winter and low in summer according to the variation of water temperature. pH represented the variation similar to DO. Suspended solid was averagely high over 100 mg/l in Yeongkwang coastal area, especially. COD did not revealed large variation with the value of about 1 mg/l. DIN and DIP concentration were high when freshwater was highly input in summer. DIN concentration was low for winter and early spring but DIP concentration did not show the seasonal variation with the continuous increase from July 2009 to December 2009. Chlorophyll a appeared high for spring with approximately $10\;{\mu}g/l$ and was higher for summer in Yeongkwang coastal area than other sites. The results of principal component analysis conducted to compare the characteristics of water quality observed in study areas showed the distinguishable features as follows. The freshwater input fluctuation appeared as the first factor in Muan and Tando bays, and the change of water temperature was the first factor in Shinan Jido and Yeongkwang coastal areas. The influence mixed with the variation of freshwater outflow and the change of water temperature in Hampyeong bay was to be the first factor.

The Characteristics of Efficiency and Torque in $L_1-B_8$ mode USM Having Linear Movement (선형 운동하는 $L_1-B_8$ 모드 초음파 전동기의 효율과 토크 특성)

  • U, Sang-Ho;Shin, Soon-In;Kim, Jin-Soo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2002.07b
    • /
    • pp.585-588
    • /
    • 2002
  • The USM uses friction between a mobile part (rotor) and a vibration part(stator), which is different from the principle of the conventional motor based on the interaction of electric and magnetic fields. In this thesis, a flat-type $L_1-B_8$ mode USM was designed and fabricated the characteristics of an ultrasonic vibration. The results of fabricated USM are as follows: (1) In case of ultrasonic motor with elastic-body of stainless, when applied voltage, frequency, pressing force of rotor were 50 [V], 27.9 [kHz], 1.5 [N], 5.0[mN m] respectively, the speed of revolution could be presented up to 0 [cm/s]. (2) In case of ultrasonic motor with elastic-body of brass, when applied voltage, frequency, pressing force of rotor were 50 [V], 21.4 [kHz], 1.5 [N], 1.4[mN m]respectively, the speed of rotor revolution was presented up to 0 [cm/s]. (3) The USM of elastic-body of stainless showing 1.17[%], somewhat low, in the maximum efficiency according to torque was superior to the USM of elastic-body of brass showing 0.34 [%]. The Flat-type $L_1-B_8$ mode USM had characteristics of typical drooping torque-speed, large torque and high speed, and operating in both directions by phase reversal.

  • PDF

Phylogenetic study of the Genus Suaeda(Chenopodiaceae) based on chloroplast and nuclear DNA sequences from Korea (엽록체 DNA 및 핵 DNA 염기서열에 근거한 한국산 나문재속(명아주과)의 분류학적 연구)

  • Kim, Suk-Kyu;Chung, Sang Ok
    • Korean Journal of Environment and Ecology
    • /
    • v.32 no.6
    • /
    • pp.566-574
    • /
    • 2018
  • The purpose of this study was to identify the phylogenetic relationships of the plants in the Korean genus Suaeda and to find out the molecular markers that could confirm the interspecies relationships in the family tree through molecular phylogenetic studies. We used the nuclear ribosomal DNA ITS and the chloroplast DNA matK, psbA-trnH, and trnL-trnF as the molecular markers. We could not distinguish between S. japonica and S. maritima and between S. maritima and S. australis in the ITS region and could not distinguish between S. japonica and S. australis with the base sequence in the psbA-trnH and trnL-trnF region. However, we analyzed the combinations of four molecular marker regions and confirmed that each of five plant species of the genus Suaeda formed the independent line. Therefore, it is considered that combinations of molecular markers would be useful for the analysis of phylogenetic relationships in the genus Suaeda. Further investigations of the ecological and morphological characteristics would be needed to understand the phylogenetic relationship and lineage diversification in the genus Suaeda.

Vacuum In-Line Sealing by a Halogen Lamp Heating of Frit-Glass Seals for Flat Panel Display

  • Kwon, Sang-Jik;Hong, Kun-Cho;Lee, Jong-Duk;Whang, Ki-Woong;Park, Sun-Woo;Kwon, Yong-Bum
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 2000.01a
    • /
    • pp.147-148
    • /
    • 2000
  • Sealing of two glass plates composing of FED panel was done in a vacuum chamber. Several factors related with a heating process of a frit glass were investigated, including comparisons with a conventional method.

  • PDF

Comparative Feeding Ecology of Sympatric Greenling Hexagrammos otakii and Schlegel's Black Rockfish Sebastes schlegeli in the Jnngbong Tidal Flat, Incheon, Korea (장봉도 갯벌의 쥐노래미(Hexagrammos otakii)와 조피볼락(Sebastes schiegeli)의 섭식생태)

  • Seo, In-Soo;Hong, Jae-Sang
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.40 no.2
    • /
    • pp.84-94
    • /
    • 2007
  • The comparative feeding ecology of greenling Hexagrammos otakii and Schlegel's black rockfish Sebastes schlereli populations was investigated in the Jangbong tidal flat near Incheon, Korea. Monthly samples were taken using a modified otter trawl from November 1999 to January 2001. The stomach contents of 124 greenling and 115 Schlegel's black rockfish were analyzed. The diet of H. otakii was dominated by the amphipods Gammaropsis iaponicus, Caprella scaura, Isaeopsis sp. and Monocorophium acherusicum, the shrimps Latreutes mucronatus and Alpheus japonicus, the mysid Neomysis orientalis and the bivalve Mytilus edulis. In contrast, S. schlegeli mainly fed on the mysids N. orientalis, N japonica, and N. awatschensis, the shrimps Exopalaemon carinicauda, A. japonicus and L. mucronatus, and the fish Pholis fangi and unidentified gobiids. A comparison of the frequency and abundance of food items showed that crustaceans (e.g. amphipods, mysids and shrimps) were important foods for both species. Their main dietary components, however differed which is probably due to differences in the spatial distribution of the two species and their prey items. In conclusion, greenling and Schlegel's black rockfish, despite being sympatric on a tidal flat have distinct food habits and low dietary overlap (Schooner's index: 0.1). These results indicate, to some extent, resource partitioning for the maximum utilization of available foods in the tidal flat.

Growth and Production of Macrobenthic Fauna on a Macrotidal Flat, Inchon, Korea -I. Growth of the Razor Clam, Solen (Solen) strictus (Bivalvia, Solenidae) from Chokchon Tidal Flat- (인천연안 간석지산 주요 저서생물의 성장과 생물생산 -I. 척전지역 간석지에 서식하는 맛조개, Solen (Solen) strictus의 성장-)

  • HONG Jae-Sang;PARK Heung-Sik
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.27 no.5
    • /
    • pp.549-559
    • /
    • 1994
  • Razor clam, Solen (Solen) strictus, was collected between May 1989 and July 1990 on a macrotidal flat, Inchon, Korea. The population sampled at just above mean sea level had a mean density of 126 individuals/$m^2$. Age was determined for 872 specimens by counting annuli, a series of closely-spaced concentric growth lines. According to the fatness index spawning seemed to have occurred once per year in June, and the first recruits for the 1989 year cohort population were found in July. Solen (Solen) strictus on the Chokchon tidal flat reached a shell length of 6.2 cm in four years. Mean growth in shell length can be described by the von Bertalanffy function, which yielded estimates of growth parameters equivalent to $L_{\infty}=81.865\;mm$ shell length and K=0.320 per year: $$L_{t}=81.865(1-e^{-0.320(t+0.487)})$$$$W_{t}=7.173(1-e^{-0.320(t+0.487)})^3$$

  • PDF

Seasonality of the Biological Activity Factors of the hard clam Meretrix lusoria in the Western Coast of Korea (한국 서해안 백합 Meretrix lusoria의 생물학적 활성요인의 계절성)

  • Song, Jae-Hee;Kim, Chi-Hong;Park, Sung-Woo;Yu, Jin-Ha;Jo, Yeong-Jo
    • Journal of Aquaculture
    • /
    • v.21 no.2
    • /
    • pp.111-122
    • /
    • 2008
  • This study was conducted to assess the usefulness of the temperature characteristics of the tidal flat sediments during low tide as a environmental factor, and burrowing behaviour, fatness, total hemocyte counts(THCs) and differential hemocyte counts(DHCs) of hard clam Meretrix lusoria as biological activity indices for the management of hard clam farms located in Taean(Chungnam province) and Gimje(Jeonbuk province) tidal flat in Korea. Temperature ranges of the sediment at 1cm depth during spring(March to May) and summer(June to August) in Taean(where the exposure time was about $5.5{\sim}6$ hours during low tide) were $8.7{\sim}26.8^{\circ}C\;and\;27.6{\sim}32.8^{\circ}C$, respectively. Even though there was no significant difference(P>0.05), temperatures of the surface sediment where submerged with remained seawater were generally higher than that of uncovered with seawater. Burrowing depths of normally digged hard clams were 0.9{\sim}3.6cm from March to October, 2002. In the field experiment performed at Taean farming ground covered with seawater, burrowing times of the clams under natural water temperatures were $41.6{\pm}10minutes$ in February and $5.4{\pm}1.3minutes$ in August, respectively, and these were influenced by water temperatures. Fatness of hard clams began to decrease from May(at Taean tidal flat) and June(at Gimje tidal flat), showed the lowest level in August and increased again from September. Total hemocytes counts in the hemolymph of the hard clams were decreased to the lowest level in July($24.7{\times}10^4cells/mL$, at Taean tidal flat) and August($28.2{\times}10^4cells/mL$, at Gimje tidal flat), and significantly increased again from September(at Taean tidal flat, P<0.01) and October(at Gimje tidal flat, P<0.001), respectively. We observed three types of hemocytes from the hemolymph of hard clams according to whether hemocytes retain the granules or not and the size of the granules. As a results, we could found that periodical monitoring of the sediment temperatures, clam burrowing behaviour and hemocyte parameters were very helpful for the management of hard clam farming.