• The Korean Journal of Mycology
• /
• v.23 no.1 s.72
• /
• pp.61-70
• /
• 1995

The genus Armillaria is important because they produce Gastrodia tubers. Seventy two isolates of Armillaria were obtained from fruit bodies grown on decayed wood in Korea. Twenty four isolates from Pinus koraiensis were identified as A. ostoyae. Two isolates from G. elata growing in the field were identified as A. mellea. Seven isolates from Acer ginnala and Quercus spp. were identified as A. tabescens. Thirty nine isolates were identified as A. gallica. Armillaria gallica was isolated from Quercus spp., Ainus japonica, Vitis amurensis and Prunus sargentii. Armillaria spp. isolates were divided into four groups based on the cultural characteristics. Group II (A. gallica KNU-A110) was better than the other groups for mycelial growth and rhizomorph formation. Isolate KNU-A110 proved to be good for production of G. elata tubers. This fungus forms mycelial fan in the plant tissue and rhizomorphs in contact with G. elata tubers. Gastrodia spp. was found in thirteen sites in Kangweon province in Korea. The plants were divided into three different kinds based on stem color. Plants with stems of brownish orange and greyish yellow were identified as G. elata, and those with greyish green colored stems were identified as G. gracilis. Gastrodia was collected mainly from humus soils rich in leaf debris, and slopes facing south from mid-May to mid-July. Once the new tubers are formed from the ancestry tuber, the ancestry tuber begins to decay. The offspring tuber, apparently gaining nutrients through rhizomorphs, begins to grow in length and slowly to enlarge. It takes three years for the offspring tuber to become ancestry tuber.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.4
• /
• pp.1082-1091
• /
• 2003

To elucidate the neuroprotective effect of Kamijihwang-hwan(KSH) on nerve cells damaged by hypoxia, the cytotoxic effects of exposure to hypoxia were determined by XTT, NR, MTT and SRB asssay. The activity of catalase and SOD was measured by spectrophometry, and TNF-α and PKC activity was measured after exposure to hypoxia and treatment of Kamijihwang-hwan(KSH) water extract(KJHWE). Also the neuroprotective effect of KJHWE was researched for the elucidation of neuroprotective mechanism. The results were as follows ; Hypoxia decreased cell viability measured by XTT, NR assay when cultured cerebral neurons were exposed to 95% N2/5% CO₂ for 2～26 minutes in these cultures and KJHWE inhibited the decrease of cell viability. H₂O₂ treatment decreased cell viability measured by MTT, and SRB assay when cultured cerebral neurons were exposed to 1-80 uM for 6 hours, but KJHWE inhibited the decrease of cell viability. Hypoxia decreased catalase and SOD activity, and also TNF-α and PKC activity in these cultured cerebral neurons, but KJHWE inhibited the decrease of the catalase and SOD activity in these cultures. Hypoxia triggered the apoptosis via caspase activation and internucleosomal DNA fragmentation. Also hypoxia stimulate the release of cytochrome c form mitochondria. KJHWE inhibited the apoptosis via caspase activation induced by hypoxia. From these results, it can be suggested that brain ischemia model induced hypoxia showed neurotoxity on cultured mouse cerebral neurons, and the KJHWE has the neuroprotective effect in blocking the neurotoxity induced by hypoxia in cultured mouse cerebral neurons.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.4
• /
• pp.449-458
• /
• 2000

Objectives : To determine the prevalence of prostatitis symptoms in the general population by questionnaire survey and to measure the effect of prostatitis symptoms on quality of life(QOL). Materials & Methods : A cross sectional community-based epidemiologic study was performed on 2,034 men, living in the Seoul metropolitan area using stepwise random sampling. Out of 2,034 interviewees, 1,356 men who were older than 40 and provided sufficient information were selected for this study. The questionnaires were completed by well trained interviewers. Contents of the questionnaires included demographic data, the Prostatitis Symptom Index(PSI), the International Prostate Symptom Score(IPSS), a general health questionnaire section and a sexual health questionnaire section. The PSI was composed of a sum of the scores from three questions about dysuria, penile pain and perineal pain and it ranged 0 to 12. Incidence of prostatitis symptoms was defined by a score of 4 or more and the reference group was defined as consisting of those with a score of 3 or less. The rate of incidence of prostatitis symptoms was assessed according to age and the difference of QOL between the prostatitis symptoms group and the reference group. Results : The overall positive rate of prostatitis symptoms measured by the PSI, in men older than 40, living in the Seoul metropolitan area, was 4.5%(61/1,356), adjusted to 4.8% by the relative proportion of this age group in the general population of the Seoul metropolitan area as compared to Korea and the World. The proportion of the group with prostatitis symptoms assessed by the PSI did not increase with age although the proportion of participants with moderate to severe lower urinary tract symptoms (LUTS) did increase with age. The group with prostatitis symptoms suffered from a much greater incidence of LUTS compared to the reference group (p<0.05). The QOL scores of the IPSS, and the general health and sexual health status of the group with prostatitis symptoms, were worse than those of the reference group.(p<0.05). Conclusions : The positive rate of prostatitis symptoms in men older than 40, living in the Seoul metropolitan area, was 4.8% and it didn't increase with age. The general QOL of the group with prostatitis symptoms was much worse than that of the reference group.

• Molecules and Cells
• /
• v.38 no.8
• /
• pp.685-696
• /
• 2015

Rice is a model plant widely used for basic and applied research programs. Plant cell wall proteins play key roles in a broad range of biological processes. However, presently, knowledge on the rice cell wall proteome is rudimentary in nature. In the present study, the tightly-bound cell wall proteome of rice callus cultured cells using sequential extraction protocols was developed using mass spectrometry and bioinformatics methods, leading to the identification of 1568 candidate proteins. Based on bioinformatics analyses, 389 classical rice cell wall proteins, possessing a signal peptide, and 334 putative non-classical cell wall proteins, lacking a signal peptide, were identified. By combining previously established rice cell wall protein databases with current data for the classical rice cell wall proteins, a comprehensive rice cell wall proteome, comprised of 496 proteins, was constructed. A comparative analysis of the rice and Arabidopsis cell wall proteomes revealed a high level of homology, suggesting a predominant conservation between monocot and eudicot cell wall proteins. This study importantly increased information on cell wall proteins, which serves for future functional analyses of these identified rice cell wall proteins.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.121-127
• /
• 2013

With the continuing demand for lightweight bicycles, carbon fiber composite materials have been widely used in manufacturing bicycle frames and components. Unlike general isotropic materials, the structural characteristics of composite materials are strongly influenced by the staking directions and sequences of composite laminates. Thus, to verify the design process of bicycles manufactured using composites, structural analysis is considered essential. In this study, a carbon-fiber-reinforced plastic (CFRP) bicycle frame was designed and its structural behavior was investigated using finite element analysis (FEA). By measuring the failure indices of the fiber and matrix under various stacking sequences and loading conditions, the effect of the stacking condition of composite laminates on the strength of the bicycle structure was examined. In addition, the structural safety of the bicycle frame can be enhanced by reinforcing weak regions prone to failure using additional composite laminates.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.529-533
• /
• 2012

In this study, we compare various physicochemical properties of solvent extracted coals obtained at both mild and high temperature conditions. In order to characterize the extraction behavior, experiments were performed using a sub-bituminous coal (Kideco) and a polar solvent (N-methyl-2-pyrrolidinone, NMP), where the extraction temperature and the effect of solvent recycling were evaluated. As the extraction temperature increased up to $350^{\circ}C$, an extraction yield and a calorific value of the extracted coal increased, while an ash content of the extracted coal decreased. FT-IR results revealed that the surface of the coal extracted at $350^{\circ}C$ was found to contain more amide, aromatic ester, and aliphatic ether groups than that at the lower temperatures. The result of MALDI-TOF/MS analysis confirmed that the smaller molecules with 300~500 m/z were extracted at a mild condition, while the bigger molecules in the range of 500~1500 m/z were extracted at the high temperature.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.4
• /
• pp.290-297
• /
• 2013

This study was carried out to investigate the effects of a by-product feed-based silage (BF silage) feeding on behavior patterns of growing Hanwoo steers. A total of 10 Hanwoo steers (11 months old, 302kg of body weight) were assigned to 2 dietary treatments: the control (concentrate mix + free access to rice straw), and the treatment (concentrate mix + free access to BF silage). The behavior patterns were observed for 48 hours. The intakes of dry matter (DM) and neutral detergent fiber (NDF) of the treatment group were higher than those of the control group. Eating time, ruminating time and resting time were not different between the control and treatment. But, the intake time per kg DM was higher for the control than treatment. The number of bolus, total chewing frequency, number of ruminating per bolus and number of bolus per minute were not different between the control and treatment. But the chewing frequency per bolus was higher in the treatment than control (p<0.05), and feed value index was lower in treatment than control (p<0.05). Frequencies of drinking and defecating were not different between the two groups, but the frequency of urinating was higher for the treatment (p<0.05) than control. Eating rate, ruminating efficiency and chewing efficiency were much higher in the treatment group than control (p<0.05). These results indicate that the replacement of conventional rice straws with the BF silage (physically effective NDF, about 25%) did not affect the ruminating behaviors of Hanwoo steers significantly.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.431-438
• /
• 2000

Properties of acid tolerance of an adipic acid-resistant mutant, Leuconostoc paramesenteroides (ANaP100) were studied and compared with those of its paired wild type of Leu. paramesenteroides (LPw). The value of protons permeability of LPw after an acid shock at pH 5.0 was 4.3 min, while the value of ANaP100 was 4.8 min at the same pH. The maximal specific activities of ATPase of LPw and ANaP100 were 0.59 unit/mg protein and 0.63 unit/mg protein at pH 6.0, respectively. The release of magnesium ion from the mutant strain was about 27.3% at pH 4 after 2 hrs, while the wild strain was about 52.2% under the same conditions. The contents of $C_{19:0,cyclo}$ and $C_{18:1}$ in a membrane fatty acid of ANaP100 and LPw were higher and lower, respectively, than that of LPw. These results indicated that acid tolerance of ANaP100 was improved in comparison with that of its wild type, LPw.

• Nutritional Sciences
• /
• v.9 no.1
• /
• pp.20-28
• /
• 2006

Aryl sulfotransferase (AST) IV is a liver enzyme involved in detoxication and has been shown to be susceptible to down regulation by a number of hepatotoxic xenobiotics. Studies presented here to investigate the ability of biological and non-biological divalent metal cations on AST IV activity showed that AST IV was strongly inhibited following in vitro or in vivo exposure to. Zn ( II ), Co ( II ) or Cd ( II ). It was found that $0.025\sim$2.5 uM of these metal ions were sufficient to cause $50\%$ of inhibition in vitro in purified AST IV and $0.25\sim$25 uM of these metal ions in liver cytosolic fractions. For the in vivo study, 1,000 mg Cu ( II )/kg, 2,000 mg Zn ( II )/kg or 250 mg Cd( II )/kg was added to individual diets and administered to three (3) group; of mts over a 7 week period The Co ( II )-supplemented diet produced no apparent change in rat growth rate and resulted in 30-fold increase in liver cytotolic Cu ( II ) levels, suggesting that elevated levels of Cu ( II ) ion in the liver were responsible for the loss of AST IV activity. In contrast, the Zn ( II )-supplemented diet caused a decrease in rat growth rates and resulted in zero increase in liver Zn ( II ) levels, which suggested an indirect inhibition mechanism was caused by Zn ( II ) in the liver. Rats were fed the Cd-supplemented diet also displayed a decrease in growth rate with little or no change in liver Cu ( II ) or Zn ( II ) levels. When the liver cytosols of mts from the metal ion diets were immunochemically analyzed for the AST IV and albumin contents, no significant changes were observed in albumin levels. However, AST IV contents in the cytosols of mts fed the Zn ( II )-supplemented diets showed a slight decrease in amount These results showed that AST IV activity in vitro and in vivo can be inhibited by Co ( II ), Zn ( II ), and Cd ( II ) by apparently different mechanisms. The immediate response to a Zn injection showed a decrease in AST IV activity but not in the AST IV content in liver cytosol. These mechanisms appeared to involve direct actions of the metal ion on AST IV activity and indirect actions affecting AST IV amount.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.401-412
• /
• 1998

The aim of this study was to measure the regional micro-shear bond strength of dentin bonding agents to dentin, and to investigate the relationship between the micro-shear bond strength and two dentinal characteristics ; Vickers hardness and remaining dentin thickness. Twenty-four freshly extracted, noncarious human molars were selected for this study. The materials tested in this study consisted of two commercially available dentin bonding agents (MAC-BOND, ONE-STEP) and two restorative light-cured composite resins (AELITEFIL, Z100). The occlusal or side surface of tooth crown was sectioned to expose dentin, and the exposed surface was finally polished with # 600 sandpaper. Four groups of application methods were used combining the filling materials and the dentin bonding agents. The composite resin-attached tooth specimens were embeded in a cold cure acrylic resin, and were cut with a low speed diamond saw to the dimension of 1mm $\times$ 1mm. Nine specimens were obtained from each tooth. The cut specimens were divided into three groups depending on the position of the dentin bonding surface. The micro-shear bond strength, remaining dentin thickness, and dentinal hardness were measured. Experimental results were then statistically analyzed with ANOVA. t-test, Scheffe test, and regression analysis. From this experiment, the following results were obtained : 1. In the case of occlusal surface bonding, the pooled micro-shear bond strength of ONST-AELIT group (16.62 MPa) was significantly higher than that of MACB-AELIT group (9.91 MPa) (p<0.05). However, there was no significant difference in the micro-shear bond strength depending on the dentin position (p>0.05). 2. In the case of side surface bonding of crown, the pooled micro-shear bond strength of four different bonding groups was not significantly different among each other (p>0.05). However, in three of the test groups (ONST-AELIT, MACB-Z100, ONST-Z100), the micro-shear bond strength to the lower 1/3(III) position was significantly lower than that to middle 1/3(II) position of surface (p<0.05). 3. In the ONST-AELIT bonding group, the pooled micro-shear bond strength to the occlusal surface was significantly lower than that to the side surface of crown (p<0.05). 4. There was no significant correlation between the micro-shear bond strength and dentin hardness / remaining dentin thickness (p>0.05).