• Journal of agriculture & life science
• /
• v.44 no.4
• /
• pp.1-7
• /
• 2010

Data was collected to develop equation for predicting stemp taper for Carpinus laxiflora in Jeju Experimental Forests. The Models tested for choosing the best-fit equations were Max & Burkhart's model, Kozak's model, and Lee's model. Performance of the equations in predicting stem diameter at a specific point along a stem was evaluated with fit and validation statistics and distribution of residuals on predicted values. In result, all the three models gave slightly better values of fitting statistics. In plotting residuals against predicted diameter, Max & Burkhart's model showed underestimation in predicting small diameter and Lee's Model did the same in predicting small diameter. Based on the above analysis of the three models in predicting stem taper, Kozak's model was chosen for the best-fit stem taper equations, and its parameters were given for C. laxiflora. Kozak's model was used to develop a stem volume table of outside bark for C. laxiflora.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.57-61
• /
• 2010

Data with collected from 278 trees sampled through out the climatic range of Quercus acuta in Jeju Experiment Forests. The models tested to select the best-fit equations form the Max & Burkhart's model, Kozak's model, and Lee's model. Performance of the equations in predicting of residuals on predicted values. In result, all three models gave slightly better values of fit statistics. In plotting residuals against predicted diameter, Max & Burkhart's model showed underestimation in predicting small diameter and Lee's Model did the same in predicting small diameter. Based on the above analysis of three models in predicting stem taper, Kozak's model was chosen for the best-fit stem taper equations, and its parameter estimates was given for Quercus acuta. Kozak's model was used to develop a stem volume table outside bark for Quercus acuta.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.43-49
• /
• 2012

This study was conducted to develop a stem volume table for the Robinia pseudoacacia using stem taper equations. Specifically, Kozak's model was used in the estimation of each model parameter. The fitness of the estimated model was statistically verified and results of the residual analysis were found significant. Therefore, this model is considered applicable in the preparation of stem volume table for R. pseudoacacia. Furthermore, volume with bark and without bark table were developed based on the bark thickness estimation equation. The bark thickness estimation equation was also statistically significant, The stem volume table developed for R. pseudoacacia, which was first in Korea, is vital in managing these forests.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.327-335
• /
• 2014

Current volume tables might underestimate or overestimate the volumes of individual trees in a specific region because the tables were made using the data from broad regions within South Korea. Therefore, to solve this problem, this study was conducted to develop local stem volume tables reflecting the local growth pattern and properties using stem taper equations in the regions of Hongcheon and Yeongju. We developed the local stem volume table for Pinus densiflora, which is the widely planted species in South Korea. To derive the most suitable taper equation for estimating the stem volume of region, three models of Max & Burkhart, Kozak and Parresol et al. were applied and their fitness were statistically analyzed by using the Fitness Index, Bias, and Standard Error of Bias. The result showed that there is a significant difference among the three models, and the Fitness Index of the Kozak model was highest compared to the other models. Therefore, the Kozak model was chosen for generating stem taper equation and stem volume tables for P. densiflora. The result from the developed stem volume tables of each region was compared to the current stem volume tables with driven by the data of tree growth obtained throughout the nation. The result showed that there is a significant difference (0.000< ${\alpha}=0.05$) in two regions, Hongcheon and Yeongju, and also there is a significant difference (0.000< ${\alpha}=0.05$) between the two regions.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.633-638
• /
• 2009

This study was conducted to develop stem taper equations and stem volume tables for Eucalyptus pellita and Acacia mangium plantations in Kalimantan, Indonesia. To derive a most adequate taper equation for the plantations, three models - Max & Burkhart, Kozak, and Lee models - were applied and their fitness were statistically analyzed by using fitness index, bias, and standard error of bias. The result showed that there is no significant difference between the three models, but the fitness index was slightly higher in the Kozak model. Therefore, the Kozak model was chosen for generating stem taper equations and stem volume tables for the Eucalyptus pellita and Acacia mangium plantations. The resulted stem volume table was compared to the local volume table used in Kalimantan regions, but no significant difference was found in the stem volume estimation. It is expected that the results of this study would provide a good information about the tree growth in abroad plantations and support a reliable decision-making for their management.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.357-366
• /
• 2015

This study was conducted to estimate carbon stocks of Quercus serrata with drawing volume of trees in each tree height and DBH applying the suitable stem taper equation and tree specific carbon emission factors, using collected growth data from all over the country. Information on distribution area, tree number per hectare, tree volume and volume stocks were obtained from the $5^{th}$ National Forest Inventory (2006~2010), and method provided in IPCC GPG was applied to estimate carbon storage and removals. Performance in predicting stem diameter at a specific point along a stem in Quercus serrata by applying Kozak's model,$d=a_1DBH^{a_2}a_3^{DBH}X^{b_1Z^2+b_2ln(Z+0.001)+b_3{\sqrt{Z}}+b_4e^Z+b_5({\frac{DBH}{H}})}$, which is well known equation in stem taper estimation, was evaluated with validations statistics, Fitness Index, Bias and Standard Error of Bias. Consequently, Kozak's model turned out to be suitable in all validations statistics. Stem volume tables of Quercus serrata were derived by applying Kozak's model and carbon stock tables in each tree height and DBH were developed with country-specific carbon emission factors ($WD=0.65t/m^3$, BEF=1.55, R=0.43) of Quercus serrata. As a result of carbon stock analysis by age class in Quercus serrata, carbon stocks of IV age class (11,358 ha, 36.5%) and V age class (10,432; 33.5%) which take up the largest area in distribution of age class were 957,000 tC and 1,312,000 tC. Total carbon stocks of Quercus serrata were 3,191,000 tC which is 3% compared with total percentage of broad-leaved forest and carbon sequestration per hectare(ha) was 3.8 tC/ha/yr, $13.9tCO_2/ha/yr$, respectively.

• Journal of Climate Change Research
• /
• v.8 no.4
• /
• pp.415-424
• /
• 2017

This study was conducted to estimate carbon stocks of Pinus densiflora with drawing volume of trees in each tree height and DBH applying the suitable stem taper equation and tree specific carbon emission factors, using collected growth data from all over the country. Information on distribution area, tree age, tree number per hectare, tree volume and volume stocks were obtained from the $5^{th}$ National Forest Inventory (2006~2010) and Statistical yearbook of forest (2016), and method provided in IPCC GPG was applied to estimate carbon stock and uptake. Performance in predicting stem diameter at a specific point along a stem in Pinus densiflora by applying Kozak's model, $d=a_{1}DBH^{a_2}a_3^{DBH}X^{b_{1}Z^2+b_2ln(Z+0.001)+b_3\sqrt{Z}+b_4e^z+b_5(\frac{DBH}{H})}$, which is well known equation in stem taper estimation, was evaluated with validations statistics, Fitness Index, Bias and Standard Error of Bias. Consequently, Kozak's model turned out to be suitable in all validations statistics. Stem volume table of P. densiflora was derived by applying Kozak's model and carbon stock tables in each tree height and DBH were developed with country-specific carbon emission factors ($WD=0.445t/m^3$, BEF = 1.445, R = 0.255) of P. densiflora. As the results of analysis in carbon uptake for each province, the values were high with Gangwon-do $9.4tCO_2/ha/yr$, Gyeongsandnam-do and Gyeonggi-do $8.7tCO_2/ha/yr$, Chungcheongnam-do $7.9tCO_2/ha/yr$ and Gyeongsangbuk-do $7.8tCO_2/ha/yr$ in order, and Jeju-do was the lowest with $6.8tC/ha/yr$. Total carbon stocks of P. densiflora were 127,677 thousands tC which is 25.5% compared with total percentage of forest and carbon stock per hectare (ha) was $84.5tC/ha/yr$ and $7.8tCO_2/ha/yr$, respectively.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.622-629
• /
• 2022

The study aim was to derive a stem taper equation for Phyllostachys pubescens, a type of bamboo in South Korea, and to develop a stem volume table. To derive the stem taper equation, three stem taper models (Max & Burkhart, Kozak, and Lee) were used. Since bamboo stalks are hollow because of its woody characteristics, the outer and inner diameters of the tree were calculated, and connecting them enabled estimating the tree curves. The results of the three equations for estimating the outer and inner diameters led to selection of the Kozak model for determining the optimal stem taper because it had the highest fitness index and lowest error and bias. We used the Kozak model to estimate the diameter of Phyllostachys pubescens by stem height, which proved optimal, and drew the stem curve. After checking the residual degree in the stem taper equation, all residuals were distributed around "0", which proved the suitability of the equation. To calculate the stem volume of Phyllostachys pubescens, a rotating cube was created by rotating the stem curve with the outer diameter at 360°, and the volume was calculated by applying Smalian's method. The volume of Phyllostachys pubescens was calculated by deducting the inner diameter calculated volume from the outer diameter calculated volume. The volume of Phyllostachys pubescens was only 20~30% of the volume of Larix kaempferi, which is a general species. However, considering the current trees/ha of Phyllostachys pubescens and the amount of bamboo shoots generated every year, the individual tree volume was predicted to be small, but the volume/ha was not very different or perhaps more. The significance of this study is the stem taper equation and stem volume table for Phyllostachys pubescens developed for the first time in South Korea. The results are expected to be used as basic data for bamboo trading that is in increasing public and industrial demand and carbon absorption estimation.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.357-363
• /
• 2019

This study was conducted to develop a stem volume table for Quercus acutissima in Korea by using Kozak's stem taper equation. In total, 2700 tree samples were collected around the country, and growth performance was investigated through compiling data on diameters by stem height and stem analysis. In order to test the stem taper equation's fitness, the fitness index (FI), bias, and mean absolute deviation (MAD) were analyzed. The fitness of the equation was estimated at 97%, bias as 0.017, and MAD turned out to be 1.118, respectively. Furthermore, there was a statistically significant volume difference between the current volume table and the new volume table (p = 0.0008, <0.005). The result indicates that using the new volume table that reflects the actual forest will reduce the loss when assessing wood resources and will improve the accuracy of forest statistics for national and local governments. A stem volume table, the main result of this research, which is utilized in the estimated stem taper equation, will provide growth information for Quercus acutissima, one of the main broadleaf species in Korea, and will function as a management indicator for rational forest management.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.461-467
• /
• 2020

The aim of this study was to utilize Kozak's stem taper model to develop both a stem taper equation and a stem volume table for Criptomeria japonica, a tree species distributed across Korea. A total of 1,000 sample trees were cut and collected across the country to measure their diameters by stem height. The equation was then used to estimate examine their stem shapes. Our results show that the Fitness Index for the equation was 98.7%, the Mean Absolute Deviation (MAD) was -0.0142, and the MAD was 1.1640, thus indicating a high level of fitness. A statistically significant difference (p < 0.05) was also found from the analysis of discrepancies between a current table and the new table used in this study. It is therefore suggested that the new table-with data from actual stands-will contribute to enhancing the accuracy of national and municipal forest statistics and reducing losses caused by imprecise data on available forest resources.