• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2010

It is of importance that all countries in worldwide, including EU and China, have adopted the Restrictions on the use of certain Hazardous Substances (RoHS) for all electronics. IEC62321 document, which was published by the International Electronics Committee (IEC) can have conflicts with the standards in the market. On the contrary Publicly Accessible Specification (PAS) for sampling published by IEC TC111 can be adopted for complementary application. In this work, we tried to find a route to disassemble and disjoint cellular phone sample, based on PAS and compare the screening methods available in the market. For this work, the cellular phone produced in 2001, before the regulation was born, was chosen for better detection. Although X-ray Fluorescence (XRF) showed excellent performance for screening, fast and easy handling, it can give information on the surface, not the bulk, and have some limitations due to significant matrix interference and lack of variety of standards for quantification. It means that screening with XRF sometimes requires supplementary tool. There are several techniques available in the market of analytical instruments. Laser ablation (LA) ICP-MS, energy dispersive (ED) XRF and scanning electron microscope (SEM)-energy dispersive X-ray (EDX) were demonstrated for screening a cellular phone. For quantitative determination, graphite furnace atomic absorption spectrometry (GF-AAS) was employed. Experimental results for Pb in a battery showed large difference in analytical results in between XRF and GF-AAS, i.e., 0.92% and 5.67%, respectively. In addition, the standard deviation of XRF was extremely large in the range of 23-168%, compared with that in the range of 1.9-92.3% for LA-ICP-MS. In conclusion, GF-AAS was required for quantitative analysis although EDX was used for screening. In this work, it was proved that LA-ICP-MS can be used as a screening method for fast analysis to determine hazardous elements in electrical products.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.4
• /
• pp.1024-1049
• /
• 2011

Korea has accomplished rapid industrial development based on the manufacturing industry. However, the growth potential has been slowing down lately due to some reasons including low employment creation rates. Also, competitions in the manufacturing industry with China and developing countries in Asia are constantly intensified. Advanced countries maintain economic growth based on the competitiveness secured by changing its industrial structure into service oriented economy. Accordingly Korean government announced various policies to promote service industry and stimulate R&D activity for the advancement of knowledge based service industry. For promoting R&D of private firm, R&D center accreditation system for knowledge based service firm is going to be introduced. However, the accreditation system needs to be revised because it was established based solely on manufacturing business. Under the existing system, subject firms for government support are selected based on R&D activities. However in service area, the difference between R&D activity and business activity is indistinctive due to its nature so that the range of subject firms can be expanded too much. So it is more practical to select major service businesses and operate the system with selected businesses. There also should be proper logic to select major service business from the whole service businesses. We have to consider Koean industrial structure which is heavily dependent on manufacturing business and has weak competitiveness in service business when preparing the logic. In this paper, we study how to set up the range of service business and the requirements for R&D center accreditation. For this, this paper analyzed the ripple effect on the economy of service businesses based on input-output analysis, R&D activity and capability to put the resource for R&D. Based on the analysis result, we suggest methods to screen subject companies for R&D center accreditation among service business and present possible measures on manpower and physical requirement for service industry's R&D center accreditation system.

• Journal of Korea Port Economic Association
• /
• v.36 no.3
• /
• pp.1-20
• /
• 2020

Coastal ferry routes are very important because they connect the mainland to islands, offer transportation for islanders, and bring tourism to islands. In particular, the recent increase in national income, prevalence of a culture that emphasizes work-life balance, and introduction of the five-day workweek have stoked interest in travel as a leisure pursuit, and demand for tourism from Korean people in islands has increased. As the number of passengers using coastal passenger terminals increases due to changes in the coastal tourism environment, the importance and need for coastal passenger terminal facilities and services is growing. Under these circumstances, it is necessary for the management organizations of coastal passenger terminals to manage and efficiently operate the terminals in such a way that budgets can be reasonably implemented and the convenience of passengers using the terminals is enhanced. This study primarily analyzed the management efficiency of coastal passenger terminals in terms of profitability and public interest using data envelopment analysis. The eight passenger terminals achieved low management efficiency in terms of profitability. These terminals should improve profitability by increasing income from terminal office rental and ancillary businesses and revenue from terminal fees by boosting island tourism and expanding overseas passenger transportation. The eight terminals with low management efficiency for public interest should increase the number of passengers by promoting island tourism, developing tour packages to Japan and China's coastal areas, developing new routes, and introducing super-high-speed ships.

• Korean Journal of Ichthyology
• /
• v.19 no.1
• /
• pp.8-15
• /
• 2007

The morphology of gonad and reproductive cycle of ribbed gunnel (Dictyosoma burgeri) were investigated on the basis of histological observation. The specimens were monthly sampled in the coastal waters of Jeju from November 2001 to February 2003. The ovaries and testis of this species are categorized as cystovarian and lobule type, respectively. The gonadosomatic index (GSI) of female increased in November and maintained high values from December to February. The GSI of male was similar to that of female although it was decreased in February. The reproductive cycle can be grouped into the following successive stage in the ovary: growth (October to November), mature (November to February), spawning (January to February), and degenerating and recovery (March to September). And in the testis, the stage observed were: multiplication (August to November), growth (November to January), mature and spawning (November to February), and degenerating and recovery (January to September). The minimum maturation size of D. burgeri was over 15.0 cm and fecundity ranged from 2,194 to 6,581 eggs. The relationship between the fecundity and fish body was calculated in the fecundity (F) equation as: $F=0.4057TL^{3.1425}$ ($R^2=0.7621$) for total length (TL); $F=149.88BW^{0.9579}$ ($R^2=0.7982$) for body weight (BW), respectively. The fecundity was correlated positively with TL and BW. The histological observations of the gonads suggested that major spawning of this species probably occurs between January to February, when low water temperature ($13{\pm}0.3^{\circ}C$) period.

• Journal of Gastric Cancer
• /
• v.4 no.4
• /
• pp.252-256
• /
• 2004

Purpose: Anastomosis site stricture is a common complication after a total gastrectomy. End-to-end anastomosis (EEA) stapler devices are preferred to a hand-sewn esophagojejunostomy these days. However, stapling devices have been reported not to reduce the incidence of esophagojejunostomy site stricture considerably. Materials and Methods: From Sep. 1998 to Dec. 2000, at Korea Gastic Cancer Center, Seoul Paik Hospital, Inje University, we experienced 228 total gastrectomies in which EEA stapling devices had been used. We investigated the correlation of the stricture with the size of the EEA stapling device, the type of esophagojejunal reconstruction, reflux esophagitis, and duration of stricture development. Results: Among the 228 cases, as far as the patient's age was concerned, the 7th decade was the most common 64 cases, followed by the 5th decades. The Male-to-female ratio was 2.3：1. A loop esophagojejunostomy was used in 223 cases, and the Roux-en-Y method was used in 5 cases. The 32 patients with anastomosis site stricture were patients with loop esophagojejunal anastomosis. Anastomosis site stricture occurred in $14\%$ (32/228) of the total gastrectomy cases, in$15.9\%$ (11/69) of the total gastrectomies involving stapler devices with a 25-mm diameter, and in $13.2\%$ (21/159) of the total gastrectomies involving staper devices with a 28-mm diameter. There was no correlation between the incidence of stricture and EEA- stapling device size (P>0.05). Reflux esophagitis occurred in 56 of the 228 cases, with 7 of those 56 cases ($12.5\%$) and 25 of the remaining 172 cases ($14.5\%$) having strictures. There was no considerable difference in the stricture incidence rate according to the presence of reflux esophagitis (P>0.05). The onset of stricture development, occurred within 6 months in 16 cases, including 4 cases of reflux esophagitis, between 7 and 18 months in 14 cases, including 3 cases of reflux eshophagitis, and after 19 months in 2 cases. Conclusion: An esophagojejunostomy site stricture after a total gastrectomy was not correlated with the esophagojejunal reconstruction type, the size of the stapling device, or the presence of reflux esophagitis. General anastomosis technical factors (e.g., adequate blood supply, tension-free manner, adequate hemostasis) may be more important to prevent anastomosis site stricture after an esophagojejunostomy during a total gastrectomy.

• Strategy21
• /
• s.38
• /
• pp.112-162
• /
• 2015

This study began to confirm or review the balance of power theory by applying scientific methods through experiential cases. Though there are several kinds of national power, this study supposes military power as a crucial power when it comes to war and peace. This research covered balance and imbalance through comparing relative military power between nations or nations' group. Comparison of relative military power can be achieved by statistically processing the values of which has been converted into the standard variables in same domain, then calculating the values of nation's power which has been synthesized different experiential factors. In addition, the criteria of experiential experiment is highly dedicated to European countries, USA, Japan prior to 1st and 2nd World War, as well as USA, Soviet Union and North East Asia during Cold War era. In addition, the balance of power theory has been redefined to review the action of the state upon the changes of power as mentioned in the theory. To begin with, the redefined theory states that relative level of military power between nations defines the consistency of peace and balance of power. If military power is enough to be on the range of level required to keep the power in equilibrium, peace and balance can be achieved. The opposite would unbalance the military power, causing conflicts. While the relative military level between nations change, nations seek to establish 'nations group' via military cooperation such as alliance, which also shift relative military power between nations group as well. Thus, in order to achieve balance of power, a nation seeks to strengthen its military power(self-help), while pursuing military cooperation(or alliance). This changes relative military power between nations group also. In other words, if there exists balance of power between nations, there is balance of power between nations group as well. In this theory, WWI and II broke out due to the imbalance of military force between nations and nations group, and reviewed that due to the balance of military force during the Cold War, peace was maintained. WWI was resulted from imbalance of military cooperation between two powerful states group and WWII was occurred because of the imbalance among the states. Peace was maintained from cooperation of military power and balance among the states during the Cold War. Imbalance among continental states is more threatening than maritime states and balance of power made by army force and naval force also is feasible. Also the outcomes of two variables are found military power balanced ratio of military power for balance is 67% when variable ratio of balance is 100% and standard value for balance is 0.86. Military power exists in a form of range. The range is what unstabilized the international system causing nations to supplement their military powers. These results made possible the calculation and comparison between state's military power. How balance of power inflicted war and peace has been studied through scientific reviews. Military conflict is highly possible upon already unbalanced military powers of North East Asian countries, if the US draws its power back to America. China and Japan are constantly building up their military force. On the other hand, Korean military force is inferior so in accordance to change of international situation state's survival could be threatened and it is difficult to achieve drastic increase in military force like Germany did. Especially constructing naval force demands lots of time; however but has benefit that naval force can overcome imbalance between continental states and maritime states.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.1
• /
• pp.3-36
• /
• 2016

Recently, the Supreme Court of Korea delivered a milestone judgment about air related multimodal transport. At there, the mattered cargo, some expensive jewellery, was transported from Qingdao, China to downtown office of consignee at Seoul via Incheon airport in Korea. As an air waybill was issued in this case, there was an air transport agreement between consignor and air courier operator. After arriving at Incheon airport, the shipment was transport by land arranged by the air courier operator, who was a defendant in this case. Upon arriving at the final destination, it was found that the jewellery was lost partly and based on circumstantial evidence, the damage presumed to be occurred during the land transport. As a subrogee, the insurance company who paid for consignee filed an action against the air courier operator for damage compensation. Defendant contended that Montreal convention should be applicable in this case mainly for limited liability. The lower court of this case confirmed that applying the limited liability clause under Montreal Convention is improper under the reason that the damage in this case was or presumed to be occurred during surface transport. It was focused on the Montreal Convention article 18 which says that the period of the carriage by air does not extend to any carriage by land, by sea or by inland waterway performed outside an airport. However, the Supreme Court overturned the lower court's decision. The delivered opinion is that the terms of condition on the air waybill including limited liability clause should be prevailed in this case. It seems that the final judgment was considered the fact that the only contract made in this case was about air transport. This article is for analysis the above decisions from the perspective that it is distinguishable between a pure multimodal transport and an expanded air transport. The main idea of this article is that under the expanded air transport, any carriage by land, sea or inland waterway only for the performance of a contract for carriage by air, for the purpose of loading, delivery or transhipment is still within the scop of air transport.

• Journal of Bio-Environment Control
• /
• v.25 no.1
• /
• pp.42-48
• /
• 2016

Angelica gigas, belonging family Apiaceae, is a perennial and famous medical plant growing in Korea, Japan, and China. The aims of this study was to analyze the growth and accumulated Decursin and its precursor Decursinol angelate of A.gigas grown under fluorescent lamp and LED. A. gigas 'Manchu' were sowed and managed for seedlings stage in a glass house for 4 weeks. One hundred twenty seedlings with 3 true leafs were transplanted at an ebb & flow system with fluorescent lamp and LED [red: peak wavelength 660nm, blue: peak wavelength 455 nm, white = 3:2:4 ratio] irradiated at $180{\pm}7{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ at the top of plant canopy for 5 weeks. The number of leaves increased by 13.5% in the LED treatment, though it is not statistically significant. Leaf length/width ratio of A. gigas grown under the fluorescent lamps was 24% bigger than the LED treatment and also the stem was 13% larger. Maximum root length was similar to both groups. Fresh weight and dry weight of shoots grown under the LED increased by 50% and 42% and the both weights of roots increased by 125% and 45%, respectively. The contents of Decursin and Decursinol angelate grown under the florescent lamps were larger than LED by 188% and 27% in shoot and 78% and 8% in root. The contents of Decursin and Decursinol angelate per plant grown under LED and florescent lamps were 132mg and 122mg. In conclusion, functional materials in A. gigas were increased by florescent light and its growth was promoted by LEDs light.

• Journal of Plant Biotechnology
• /
• v.42 no.3
• /
• pp.161-167
• /
• 2015

Sweetpotato [Ipomoea batatas (L.) Lam] grows well in harsh environmental conditions, and is cultivated as one of the top seven food crops in the world. Recently, sweetpotato is drawing interest from people as a healthy food because it is high in dietary fiber, vitamins, carotenoids and overall nutrition value. However, few studies have been conducted on sweetpotato genome sequencing in spite of its importance. This review is aimed at increasing the efficiency of sweetpotato genome sequencing research as well as establishing a base for gene utilization in order to control useful traits. Recently, animal and plant genome sequencing projects increased significantly. However, sweetpotato genome sequencing has not been performed due to polyploidy and heterogeneity problems in its genome. Meanwhile research on its transcriptome has been conducted actively. Recently, a draft of the diploid sweetpotato genome was reported in 2015 by Japanese researchers. In addition, the Korea-China-Japan Trilateral Research Association of Sweetpotato (TRAS) has conducted research on gene map construction and genome sequencing of the hexaploid sweetpotato Xushu 18 since 2014. The Bill & Melinda Gates Foundation launched the 'sweetpotato genomic sequencing to develop genomic tools for Sub-Sahara Africa breeding program'. The chloroplast genome sequence acquired during sweetpotato genome sequencing is used in evolutionary analyses. In this review, the trend of research in the sweetpotato genome sequencing was analyzed. Research trend analysis like this will provide researchers working toward sweetpotato productivity and nutrient improvement with information on the status of sweetpotato genome research. This will contribute to solving world food, energy and environmental problems.

• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.171-182
• /
• 2018

Papaya (Carica papaya L.) is one of the crops widely planted in tropical and subtropical areas. The papaya fruit has low calories and are plentiful in vitamins A and C and in minerals. A major problem in papaya production is a plant disease caused by the papaya ringspot virus (PRSV). The first PRSV-resistant GM papaya expressing a PRSV coat protein gene was developed by USA scientists in 1992. The first commercial GM papaya cultivars derived from the event was approved by the US government in 1997. Development of transgenic papayas has been focused on vaccine production and limited agricultural traits, including insect and pathogen resistance, long shelf life, and aluminum and herbicide tolerance. Approximately 17 countries, including the USA and China, produced transgenic papayas and/or commercialized them, which provoked studies on biosafety assessment and development of GM-detection technologies. For the biosafety assessment of potential effects on human health, effects of long-term feeding to model animals have been studied in terms of toxicity and allergenicity. Studies on environmental safety assessment include influence on soil-microbial biodiversity and transfer to soil bacteria of GM selection markers. Many countries, such as Korea, the European Union, and Japan, that have strict regulations for GM crops have serious concerns about unintended introduction of GM cultivars and food commodities using unauthorized GM crops. Transgene- and/or GM event-specific molecular markers and technologies for genomics-based detection of unauthorized GM papaya have been developed and have resulted in the robust detection of GM papayas.