• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.199-208
• /
• 1994

Analytical methods for the determination of the derivatives of the herbicide (${\pm}$)-2-(4-chloro-2-methylphenoxy)propionic acid (MCPP) by capillary column gas chromatography with mass spectrometer (GC-MS) and electron-capture detection (GC-ECD) were studied. A successful procedure was introduced for the ester preparation using $H_2SO_4$, as the catalyst and the alcohol 2,2,2-trichloroethanol (TCE) or 2,2,2-trifluoroethanol (TFE). The identificaiton and elucidation of MCPP by GC-MS spectrometry following the esterification with diazomethane, $BF_3$/methanol, $H_2SO_4$/methanol, TCE, TFE, or pentafluorobenzyl bromide (PFB) were carried out. A comparison of the response-sensitivities among those MCPP esters was made with GC-ECD. Although the methylation product of MCPP was confirmed by GC-MS, its low sensitivity to the ECD limited the detection of MCPP. TCE, TFE, and PFB derivatization methods resulted in a high rate of MCPP esterifications and very sensitive ECD molecular responses. Based on efficiency, convenience, worker safety, and least sample contamination, TFE esterificaiton was considered as the superior method for MCPP analysis to the other methods of derivatization. An accurate method is described for quantifying MCPP in soil leachates by GC-ECD at very low concentrations without the requirement of a complicated clean-up process. As a result, MCPP residues at concentrations of less than $0.1{\mu}g$ in 100ml soil leachate were detected.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.1
• /
• pp.1-13
• /
• 1982

Composite soil samples from 236 sites representing paddy field, up-land, orchard and plastic film house were examined for organochlorine residues by GLC-ECD. Detection frequencies and residual levels of most persistent organochlorine residues in the soil samples were found to depend on the cropping practices. Highest organochlorine residues were found in orchard soils and followed, in decreasing order, plastic film house, up-land and paddy field soils. ${\alpha}-Endosulfan$, dieldrin, p,p'-DDD and p,p'-DDT were responsible for the observed high organochlorine residues in the orchard soils. ${\alpha}-BHC$ and ${\gamma}-BHC$ were detected in all 236 soil samples. The mean residue levels of both BHC isomers were, however, remained fairly low. Residues of PCNB and ${\alpha}-endosulfan$ in native soils are reported, for the first time, in present work. PCNB was present in up-land plastic film house soils while ${\alpha}-endosulfan$ was found in all agricultural soils studied. High levels of p,p'-DDT and dieldrin were discussed in relation to crops cultivated, amount and duration of the pesticides usage. Need for continued observations on the persistent residue of pesticides in soils, already banned for general use, is emphasized.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.7
• /
• pp.35-46
• /
• 2009

Pressure grouting is a common technique in geotechnical engineering to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressure grouting has been applied to a soil-nailing system which is widely used to improve slope stability. The soil-nailing design has been empirically performed in most geotechnical applications because the interaction between pressurized grouting paste and the adjacent ground mass is complicated and difficult to analyze. The purpose of this study is to analyze the increase of pullout resistance induced by pressurized grouting with the aid of performing laboratory model tests and field tests. In this paper, two main causes of pullout resistance increases induced by pressurized grouting were verified: the increase of mean normal stress and the increase of coefficient of pullout friction. From laboratory tests, it was found that dilatancy angle could be estimated by modified cavity expansion theory using the measured wall displacements. The radial displacement increases with dilatancy angle decrease and the dilatancy angle increases with injection pressure increase. The measured pullout resistance obtained from field tests is in good agreement with the estimated one from the modified cavity expansion theory.

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.130-140
• /
• 2014

Recently, some of the previous studies reported that tolclofos-methyl is still exist in ginseng cultivated soil, even though it is has been banned for ginseng. Therefore, the current study was aimed to examine the levels of absorption and translocation of tolclofos-methyl from ginseng cultivated soil to ginseng root and leaf stem for the period of 1 year. For this study, ginseng plants were transplanted in pots and treated with $5.0mg\;kg^{-1}$ of tolclofos-methyl (50% WP). At the end of each interval periods (every three months) the samples (soil, roots and leaf stems) were collected and analyzed the absorption and translocation levels of tolclofos-methyl using gas chromatography and mass spectrometry (GC-MS). The limit of quantitation of tolclofos-methyl was found to be $0.02mg\;kg^{-1}$ and 70.0~120.0% recovery was obtained with coefficient of variation of less than 10% regardless of sample types. In this study, a considerable amount of translocation of tolclofos-methyl residues were found in soil (4.28 to $0.06mg\;kg^{-1}$), root (7.09 to $1.54mg\;kg^{-1}$) and leaf stem (0.79 to $0.69mg\;kg^{-1}$). The results show that the tolclofos-methyl was absorbted and translocated from ginseng cultivated soil to ginseng root and ginseng leaf stem and found to be decreased time-coursely. Secondly, we were also analyzed soil, root and leaf stems samples from Hongcheon, Cheorwon, Punggi and Geumsan by GC-MS/MS (172 pesticides), LC-MS/MS (74 pesticides). In this study, 43 different pesticides were detected ($0.01{\sim}7.56mg\;kg^{-1}$) in soil, root and leaf stem. Further, tolclofos-methyl was detected 4 times separately in root sample alone which is less ($0.01{\sim}0.05mg\;kg^{-1}$) than their maximum residual limit (MRL) in ginseng. Consequently, the results from both studies indicate the residues of tolclofos-methyl found in ginseng cultivated soil and ginseng ensuring their safety level. Moreover, long-term evaluations are needed in order to protect the soil as well as ginseng free from tolclofos-methyl residues.

• Journal of Food Hygiene and Safety
• /
• v.23 no.1
• /
• pp.6-14
• /
• 2008

Objective of this study was to investigate the residual levels of mercury (Hg) in soil for "Top-rice" area and its uptake into rice plant for making sure food safety as compared to "Top-rice" & common rice produced from 2005 to 2006. Hg was analyzed with the direct mercury analyzer (DMA 80, Milestone, Italy), which implements the US/EPA method 7473. The average concentration of Hg in paddy soil was 0.031 mg/kg, which was below at 1/25-1/65 fold of the threshold levels (concern level 4 mg/kg, action level 10 mg/kg) for soil contamination designated by "The Soil Environment Conservation Law" in Korea. The maximum residue level (MRLs) for Hg residue in the polished rice is not designated in Korea. Therefore, Hg contents in the polished rice of "Top-rice" brand and common rice were compared to other country's criteria. Hg contents in the polished rice of "Top-rice" brand was 0.0018 mg/kg, which was lower at 1/10-1/30 fold than the MRLs, 0.02 mg/kg of China criteria and 0.05 mg/kg of Taiwan criteria, respectively. Hg were 0.02788, 0.00896, 0.00182, 0.00189, 0.00166, 0.00452 and 0.00145 mg/kg in soil, rice straw, unhulled rice, rice hulls, brown rice, rice bran, and polished rice produced in 2006 "Top-rice" area, respectively. For the ratio of Hg as compared to Hg contents in soil, there were 0.321 of rice straw ${\gg}$ 0.162 of rice bran ${\gg}$ 0.068 of rice hulls > 0.065 of unhulled rice > 0.060 of brown rice> 0.052 of polished rice. And, the slope of Hg uptakes was steeped as following order; rice straw ${\gg}$ rice bran ${\gg}$ rice hulls > unhulled rice > brown rice > polished rice. It means that the more slope steeped was the more uptakes. For the distribution of Hg uptaken, there was 83.8% into rice straw, and 16.2% into unhulled rice, 2.8% into rice hulls, 12.4% into brown rice, 3.5% into rice bran and 9.7% into polished rice. Consequently, it was appeared that the Hg contamination in the polished rice should not be worried in Korea.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.1
• /
• pp.1-35
• /
• 2007

In the last decades, the decrease in biological or chemical availability of sorbed contaminants as contact time passed, is generally accepted. This phenomenon so called as "aging" or "sequestration" is known to directly affect risk of the contaminats. This was observed for mainly for hydrophobic organic contaminants (HOCs), but also reported for heavy metals. Aging is known to be directly related to sorption-desorption hysteresis, irreversible sorption, desorption-resistance, nonequilibrium sorption, etc. The decrease in bioavailability due to aging or sequestration indicates realistic decrease in risk potential. Recently a risk-based management concept by scientific evidences but not the simple measurement of contaminant concentration has been attempted to determine environmentally acceptable remedial endpoint. This is because selection of remedial endpoint based on not total concentration but the bioavailability and toxicity of contaminants can reduce both the treatment cost and remedial activities of the contaminated sites. The bioavailability and toxicity of the residual contaminants are highly affected by the fate and transport and also directly affect the exposure pathways and bioaccumulation of contaminants in the living biota. In this paper, scientific feasibility on the risk-based clean-up and management of contaminated sites is reviewed.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.337-346
• /
• 2020

This study was carried out to evaluate the applicability of the soil washing process to remediation mercury-contaminated mine tailing or solid material (soil and sediments etc.) around abandoned mines. First, the physicochemical characteristics of mine tailing were analyzed through particle size analysis and sequential extraction. Secondly, laboratory scale washing experiments were performed using hydrochloric acid, nitric acid, potassium iodide and sodium thiosulfate. As a results of particle size analysis, mine tailing particle were concentrated below 40 mesh and the particle size below 200 mesh was the most analyzed. As a result of sequential extraction, elemental mercury fraction was analyzed as the highest with 69.12%, with strongly bound fraction 15.25% and residual and HgS fractions 11.97%, respectively. Laboratory scale washing experiments showed low applicability for nitric acid and sodium thiosulfate solutions. In case of hydrochloric acid solution, it was analyzed that mercury removal was possible at particle size of 200 mesh or more. Therefore, it is considered to be performed together with the physical sorting process. Potassium iodide solution was analyzed to have high washing efficiency at all concentrations and particle sizes. In particular, the mercury removal efficiency is high in the micro particles, and thus the applicability of the washing technology is the highest.

• Clean Technology
• /
• v.14 no.2
• /
• pp.95-102
• /
• 2008

In order to choose alternative environmental-friendly cleaning agents, it is very important in the present point that the systematic selection procedures should be introduced and applied to the industry through the evaluation of their cleaning ability, environmental characteristics, and economical factors, and that the objective and effective evaluation methods of cleanliness should be established for the industry. Thus, a novel cleaning evaluation method utilizing optically stimulated electron emission (OSEE) among various methods of cleaning ability was studied in this study. The contaminants used in this cleaning experiments were flux, solder, grease, cutting oil, and mixed soil of 35% grease and 65% cutting oil. The cleaning agents developed or prepared in our laboratory were employed and their cleaning ability were comparatively evaluated by the OSEE, gravimetry and contact angle methods. The experimental results in this work showed that flux cleaning efficiency measured by the OSEE method was similar to that of the gravimetric method, but that the OSEE method could not be compared with gravimetric method for the case of solder or grease cleaning because the contaminants radiate or absorb ultra-violet light. In case of cutting oil cleaning, the gravimetric method indicated its limitation of cleaning efficiency of cutting oil since it showed cleaning efficiency of 100%, even though residual soil remaining on the substrate surface a little after its cleaning. The comparative experimental results of cleaning ability evaluated by the OSEE- and contact angle measurement methods showed that they were similar in case of cleaning of flux, mixed soil and cutting oil. It was judged that the contact angle measurement method could evaluate the cleaning ability more precisely than the OSEE method for cleaning solder and grease.

• Journal of Plant Biology
• /
• v.11 no.1
• /
• pp.7-14
• /
• 1968

Buckwheat seeds produced in previous year (1965) in an experimental pot culture in which nine levels of P-32 ranging from $1.4{\times}10-4 to 3.3{\times}104$\mu$c/pot(as of 27 July 1965)$, with the same specific activity, had been applied to the corresponding pots respectively, were used this year(1996) in water and soil culture as well as in germination test to investigate the feature and extent of possible residual effects of P-32 incorporated upon germination and plant growth, and the following results were obtained: 1. Under the given experimental conditions both stimulative and inhibitory effects of radiation were observed. 2. The germination rate of the seeds was lower at the higher level of P-32 aplication ranging from $3.0{\times}103 to 3.3{\times}104$\mu$c/pot$ and higher at 0.2 $\mu$c P/pot than the control. 3. Among the seeds produced at the higher level of application about 80% was failed to germinate, owing to the radiation injury. The remaining 80% was failed to germinate, owing to the radiation injury. The remaining 80% survived the damaging effect and showed vigorous growth and increased yield. The latter group of seeds thus proved themselves to be more radioresistant than the former. 4. The survived seeds produced later more straw and root on dry weight basis. The higher the level of P-32 applied, the stronger the stimulative effect showed in vegetative growth. 5. No radiation effect on linear growth of the plants was observed in the soil culture. 6. The dry weight of straw produced showed little difference at the moderate range compared with that of control in the soil culture. At high level of application, i.e. over $\mu$c P32/pot, however, the production was increased by 12-37% of control. 7. As for the dry weight of root harvested, the P-32 treatment over 24$\mu$c P32/pot produced 82-155% more than the control, whereas little difference was observed under 2.2$\mu$c P32/pot. 8. The seed production increased in general by the P-32 treatments. Particularly at the moderate level of application the rate of increase amounted to 70% of the control. 9. Those individual plants which survived damaging effects of radiation at the germinating stage shwoed remarkable stimulative effects both in vegetative and in reproductive stage of growth.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.479-495
• /
• 2018

This study was carried out to research the multimedia fate modeling, concentration distribution and impact assessment of polycyclic aromatic hydrocarbons (PAHs) emitted from automobiles, which are known as carcinogenic and mutation chemicals. The amount of emissions of PAHs was determined based on the census data of automobiles at a target S-city and emission factors of PAHs, where multimedia fugacity modeling was conducted by the restriction of PAHs transfer between air-soil at the impervious area. PAHs' Concentrations and their distributions at several environmental media were predicted by multimedia fugacity model (level III). The residual amounts and the distributions of PAHs through mass transfer of PAHs between environment media were used to assess the health risk of PAHs at unsteady state (level IV), where the sensitivity analyses of the model parameter of each variable were conducted based on Monte Carlo simulation. The experimental result at S-city showed that Fluoranthene among PAHs substances are the highest residual concentrations (60%, 53%, 32% and 34%) at all mediums (atmospheric, water, soil, sediment), respectively, where most of the PAHs were highly accumulated in the sediment media (more than 80%). A result of PAHs concentration changes in S-city over the past 34 years identified that PAHs emissions from all environmental media increased from 1983 to 2005 and decreased until 2016, where the emission of heavy-duty vehicle including truck revealed the largest contribution to the automotive emissions of PAHs at all environment media. The PAHs concentrations in soil and water for the last 34 years showed the less value than the legal standards of PAHs, but the PAHs in air exceeded the air quality standards from 1996 to 2016. The result of this study is expected to contribute the effective management and monitoring of toxic chemicals of PAHs at various environment media of Metropolitan city.