• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.39-50
• /
• 1993

The purpose of this study was to describe the micromorphological changes in Korean red pine (Pinus densiflora S. et Z.) wood decayed by a major brown-rot fungus, Lentinus lepideus, using scanning electron microscope and transmission electron microscope. At the end of the 12-week exposure to the fungus in soil block procedure(ASTM 1971), test blocks sustained 5.02% weight loss. The formation of bore hole by hyphae and penetration of hyphae through bordered pit were not observed. Instead, fungal hyphae appeared to penetrate axially tracheid luminar from the the ray cells via cross field pits. Hyphae were mainly found in lignin rich cell corner regions of tracheids, and also extensive degradation of tracheid wall occurred in this region. Extensive degradation of $S_2$ layer occurred without noticeable alteration of the $S_3$ layer, but warty layer and compound middle lamella remained relatively intact. Localized erosion, the characteristic of white rot, was observed in some cell wall and wall components including lignin were found to be decomposed.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.58-67
• /
• 2014

We investigated the mechanical properties of Korean red pine (Geumgangsong, Pinus densiflora forma erecta Uyeki) of Uljin province in Korea as a basic research to investigated the material properties. Compressive strength of Korean red pine was $36.2N/mm^2$, which was slightly lower than the pine (Pinus densiflora S. et Z.) in Korea. The compressive strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. Bending strength of Korean red pine was $76.5N/mm^2$, which was slightly higher than the pine (Pinus densiflora S. et. Z.) and nut pine (Pinus koraiensis) in Korea. Similar to the compressive strength, bending strength of Korean red pine showed the maximum value at a distance of 60 mm from the pith. On the other hand, the shearing strength showed the maximum value at part of including the pith. This result does not coincide with the results of compressive and bending strength, in consideration of the specific gravity, which is consistent. Surface hardness of Korean red pine was $43.7N/mm^2$ in cross section, $12.0N/mm^2$ in radial section and $13.7N/mm^2$ in tangential section respectively. The mechanical properties of Korean red pine were similar to the pine and nut pine having a similar specific gravity. The mechanical properties were greatly affected on the specific gravity than the annual ring width.

• Korean Journal of Environment and Ecology
• /
• v.21 no.3
• /
• pp.257-277
• /
• 2007

We carried out a phytosociological study on pine forests in Korea with the method of Zurich-Montpellier School. We collected the data of 252 $relev{\acute{e}}s$ from 45 sites in the pine forests throughout the Korean Peninsula and its attached islands. The vegetation of the pine forests was classified into one association, three communities and seven subcommunities as follows: A: Quercus mongolica-Pinus densiflora community, A-1: Typical subcommunity, A-2: Vaccinium korean urn subcommunity, A-3 : Rhododendron micranthum subcommunity, B: Quercus serrata-Pinus densiflora community, B-1: Typical subcommunity, B-2: Juniperus rigida subcommunity, B-3: Styrax japonica subcommunity, B-4: Eurya japonica subcommunity, C: Saso-Pinetum densiflorae Yim et al. 1990, and D: Castanopsis cuspidata var. sieboldii-Pinus densiflora community. The former three communities were integrated into the Lindero-Quercion mongolicae Kim 1990 em. 1992. The Castanopsis cuspidata var. sieboldii-Pinus densiflora community remained to be studied in future to determine the association. The communities of Quercus mongolica-Pinus densiflora community was distributed throughout the montane zone in central-northern part of the Korean Peninsula. Quercus serrata-Pinus densiflora community occupied widely in the sub-montane and hilly areas in central and Southern Korean Peninsula. The association of Saso-Pinetum densiflorae was found in Cheju Island. Castanopsis cuspidata var. sieboldii-Pinus densiflora community were distributed in the warm-temperate zone including islands off the south-west coast of the Peninsula.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.81-93
• /
• 1996

To elucidate the structure of procyanidin in Korean red pine (Pinus densiflora S. et Z.), bark, the extractives were extracted with acetone-water mixture(7:3, v/v) from inner bark of Korean red pine. The extracts separated three fractions which were extracted by liquid-liquid extraction. The extracting solvents were chloroform and ethyl acetate and water. The part of ethylacetate soluble was chromatographed by liquid chromatography. The ethylacetate soluble portion yielded four natural procyanidin dimers, two known epicatechin-($4{\beta}{\rightarrow}6$)-catechin, catechin-($4{\alpha}{\rightarrow}8$)-catechin and two unknown catechin-($4{\beta}{\rightarrow}6$)-catechin and conformational isomer of epicatechin-($4{\alpha}{\rightarrow}6$)-catechin. The additional catechins was also isolated. The structures of these procyanidins were elucidated by their $^{13}C$-NMR spectra.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.11-16
• /
• 1996

The purpose of this paper is to present a summary of assignment design values according to domestic softwood structural lumber grading rules. Allowable stresses for visually graded lumber were determined from basic data on small. clear specimens. The data corrected for variability such as natural defects and other factors. The procedure adopted by Japan was used for assigning allowable design values. Strength ratios in relation to each defect were taken from ASTM D 245-81. Korean pine(Pinus koraiensis S. et Z.), Korean red pine(Pinus densiflora S. et Z.), Japanese larch(Larix leptolepis Gordon) and Needle fir(Abies holophylla Max) were applied to this study. The calculated allowable stresses were same in Korean pine and Korean red pine. These values were highest in Japanese larch lowest in Needle fir. So, it is desirable for these species to be classified into different catagories Species Group. However, accurate comparison in design values on lumber grading rules among U.S., Japan and Korea was somewhat difficult. And full scale testing will be necessary for accurate determination of the correction factors to setting up design values.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.53-66
• /
• 1987

Korean red pine (Pinus densiflora S. et. Z.) and pitch pine(Pinus rigida Mill) $5{\times}10cm$ dimension lumber were dried in a kiln providing a cross-circulation velocity of 5 m/sec at dry-and wet-bulb temperatures of 116 and $71^{\circ}C$, followed by 3 hours at 91 and $85^{\circ}C$. Compared to dimension lumber dried lumber were as follows. 1. To dry to 10 percent moisture content, the high-temperatures schedule of Korean red pine and pitch pine lumber took less than one seventh the time required by the conventional kiln drying schedule. 2. High-temperature drying rate and conventional drying rate to 10 percent moisture content of Korean red pine lumber were 2.75 and 0.35%/hr, and those of pitch pine lumber were 3.38 and 0.46%/hr respectively. 3. Compared to lumber of both species on conventional schedule, moisture gradient of high-temperature lumber was greater. 4. Compared to lumber on conventional schedule, maximum surface checking of high-temperature lumber of both species was severer, and maximum end checking of high-temperature lumber of both species was similar to that of lumber on conventional schedule. 5. Compard to lumber on conventional schedule, Korean red pine lumber dried at high temperature showed more honeycombing, but pitch pine lumber dried at high-temperature showed significantly slighter honeycombing. 6. Compared to lumber on conventional schedule, the high-temperature lumber showed less warping lumber of both species. 7. Collapse and casehardening of Korean red pine and pitch pine lumber on both scheules were slight.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.569-576
• /
• 2021

This study developed an estimation model for litterfall input using the stand parameters (basal area, stand density, mean DBH, and carbon stocks of the aboveground tree biomass) collected from the Korean red pine (Pinus densiflora S. et Z.) stands of seven regions in Gyeongsangnam-do. The mean annual litterfall was 2,779 kg ha^-1 year^-1 for needles, 883 kg ha^-1 year^-1 for miscellaneous, 611 kg ha^-1 year^-1 for broadleaved, 513 kg ha^-1 year^-1 for branches, and 340 kg ha^-1 year^-1 for bark litter. The mean annual total litterfall was 5,051 kg ha^-1 year^-1. Litterfall components were significantly correlated with stand parameters, except for broadleaved litter. A stronger correlation was observed between the carbon stock of the aboveground tree biomass and all the litterfall components compared with the other stand variables. The allometric equations for all the litterfall components were significant (P < 0.05), with the stand parameters accounting for 5%-43% and 8%-42% of the variation in the needle litter and total litterfall, respectively. The results indicated that the annual litterfall inputs of the Korean red pine stands on a regional scale can be effectively estimated by allometric equations using the basal area and carbon stocks of the aboveground tree biomass.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.21-28
• /
• 2019

This study was conducted to determine the carbon (C) and nitrogen (N) response of litterfall components as affected by N addition in compound fertilizer in a Korean red pine (Pinus densiflora S. et Z.) stand in southern Korea. Litterfall in a mature red pine stand was collected for two years following compound fertilizer application ($N_3P_4K_1$; $P_4K_1$) and no fertilization (control). The C concentration of litterfall components was not significantly (P > 0.05) different between the $N_3P_4K_1$ and the control plots, whereas the N concentration of the litterfall components was significantly higher in the $N_3P_4K_1$ plot than in the control plot. The $N_3P_4K_1$ and $P_4K_1$ additions induced a lower C/N ratio of litterfall components compared with the control plot. Annual C and N fluxes via litterfall components were not affected by the $N_3P_4K_1$ addition over the study period, except for reproduction litter. Annual N fluxes via reproduction litter were significantly higher in the $N_3P_4K_1$ plot than in the control plot. Thus, the $N_3P_4K_1$ and $P_4K_1$ additions could modify differently nutrient distribution of the forest floor and mineral soils in a red pine stand. These results indicate that N concentration and C/N ratio in litterfall components are more susceptible to fertilizer application than the C response in litterfall components.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.53-61
• /
• 1974

Pine forests existing in Hong-do island were examined as regarding such characteristics, tree form, needle length, branch diameter, bark colors, ratio of summer wood to springwood, location and number of resin canal and other measurements. Hong-do island, located the furthest west part of Korea, suports only Pinus densiflora but very few Pinus thunbergii, in fact the present authors could not find any black pine individuals at all through investigation. Checking 14 individual trees of red pine, more than age of 20, of the genetic contamination by black pine, in a certain degree, exist. Here, a very dense foliage type and a very sparse foliage type tree of red pine growing nearby was examined and the unique fact was that each of those type has only one (average number 1.3) accessory resin canal, while other trees have three as minimum or more. The present authors thought this island had not been covered by any Pinus thunbergii but by Pinus densiflora. It was thought that Pinus thunbergii stands grown along the sea-coast of Korean Peninsula are pollen donors to this island.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.108-116
• /
• 2010

This paper explains the effects of wood drying on treatability (as determined by water uptake) of Japanese red pine (Pinus densiflora S. et Z.) at the sevenmoisture content (MC) levels above and below the fiber saturation point (FSP). According to the experimental results, it was found that water uptake (as the percentage of void volume filledwith distilled water, VVF%) was influenced by level of moisture content and percentage of void volume filled was improved effectively by kiln drying process. A significant relationship between moisture content and treatability was established. Permeability and liquid uptake were decreased above the FSP due to the effect of the less void space available in wood. Even though increased liquid uptake was observed at lower moisture content, no significant differences was observed moisture content below 20%. Therefore, this species need to be initially dried below FSP before treated with liquids. But drying moisture content below 10% might not be economical for the commercial purpose comparing drying the wood between 10 and 20% moisture content. The result of this study inferred that the treatability of pine wood can be improved by reducing the moisture content up to a certain level of 10~20% for allowing better performance.