• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.29-34
• /
• 2017

This study analyzed automobile lower arm assembly structure and fatigue to identify configuration changes to enhance structural safety. Parts connected to the car body were fixed and 500 N load was applied at the lower arm head. Maximum equivalent stress and maximum total deformation were minimized for model 1 ( MPa and 0.10315 mm, respectively). Fatigue analysis using extreme SAE bracket history fatigue loads showed model 1 also improved fatigue life ($3.3693{\times}10^5cycles$). This study provides important inputs to improve lower arm durability by modifying the arm configuration.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.34-43
• /
• 2010

Recently environmental regulations like the Kyoto Protocol, adopted in 1997, required the reduction of the greenhouse gas of 5.2% up to 1990 regulations. and 13th General Assembly in 2007, held in Bali of India, have agreed to duty reduction even in developing countries in 2013. Because of the lack of information about real process in small or middle size industries, most recent research omitted to calculate green house gas emissions from the industrial process. Bottom-up methodology will be applied for calculation of green house gasemission from industry sector to solve these problems in this research. Total amount from industry sector of Shicheung-City in 2007 was about 1,797,305 tons of greenhouse gas $CO_2$ and 3,049,403 tons of the greenhouse gas $CO_2$ calculated from industry sector of Ansan-City in 2007.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.510-514
• /
• 2013

The structural change of Nafion polymer electrolyte membrane (PEM) induced by hot-pressing, which is one of the representative procedures for preparing membrane-electrode-assembly for low temperature fuel cells, was investigated by $^2H$ nuclear magnetic resonance (NMR) spectroscopy. The hydrophilic channels were asymmetrically flattened and more aligned in the membrane plane than along the hot-pressing direction. The average O-$^2H$ director of $^2H_2O$ in polymer electrolyte membrane was employed to extract the structural information from the $^2H$ NMR peak splitting data. The dependence of $^2H$ NMR data on water contents was systematically analyzed for the first time. The approach presented here can be used to understand the chemicals' behavior in nano-spaces, especially those reshaping and functioning interactively with the chemicals in the wet and/or mixed state.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.12
• /
• pp.107-112
• /
• 2021

The usage of electric-powered components consisting of several electrical and mechanical parts is continuously increasing in automobiles. Therefore, continuous assessment of the reliability and quality of these electric-powered parts is crucial. In this study, a noise and vibration measurement system for testing and evaluating the different electric-powered parts of automobiles was designed. Further, an FFT analysis was performed on some electric-powered steering assembly test equipment. In the FFT analysis of the noise and vibration signals for each essential fault part, the vibration FFT analysis was significantly compared with the noise analysis. The results showed that the vibration FFT analysis was more effective in determining the reliability and quality of the electric-powered parts.

• Journal of Korean Biological Nursing Science
• /
• v.21 no.3
• /
• pp.161-168
• /
• 2019

Purpose: The purpose of this paper (a literature review study) was to confirm the trend of nursing research for head and neck cancer patients in Korea. Methods: Research databases were reviewed and analyzed from 13 papers (2004 through 2019 using KISS, NDSL, RISS, DBpia, and the National Assembly Library. As a result of this paper, we found that there were many studies that used questionnaires. Results: Measurement variables related to head and neck cancer patients were physical variables related to oral condition, psychological variables related to depression and anxiety, social support, family support related to family, and quality of life as a result variable. Conclusion: Therefore, integrated nursing intervention strategies and clinical nursing research considering the physical, psychological, social, and family aspects of head and neck cancer patients are needed. Based on the results of this study, we propose qualitative research on head and neck cancer patients, development of educational programs, intervention studies to verify effects, and development of clinical practice guidelines.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.881-888
• /
• 2022

Servo presses are used in variety of ways in industry throughout the production and assembly lines of machine parts. The bottom of the servo press is fixed to a bed or a tabletop, and the press cylinder continuously operates under vertical upward loads. In this research, a static structural analysis was performed by simplifying 3D model of the servo press, and the maximum deformation was applied to the clamp and bolt. The maximum value of Von Mises stress was reported in this paper. The result was used to calculate the safety factor, and it was confirmed that the design was conservative.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2001.11a
• /
• pp.110-110
• /
• 2001

Histone deacetylase(HDAC), a neuclear enzyme that regulates gene trascription and the assembly of newly synthesized chromatin, has received much attention in recent literature. The explosion of activity in this field has yielded the cloning of a mammalian gene which encodes a complementary histone acetyl trasferases. Several cyclic tetrapeptide inhibitors of HDAC has been reported to affect the hyperacetylation of mammalian and plant histones. Apicidin, a natural product HDAC inhibitor recently isolated at Merck Research Laboratories, induces therapeutic applications as a broad spectrum antiprotozoal agent to multi-drug resistant malaria and a potential antitumor agnet. The biological activity of apicidin appears to be attributable to inhibition of apicocomplexan HDAC at low nanomolar concentrations.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.13-22
• /
• 1997

Strapdown inertial navigation system(SDINS) is a navigational instruments necessary to guide and con- trol a free vehicle. In this study, an error analysis of mechanical parts is carried out for manufacturing a dynamically tuned gyroscope. The errors usually come from the tolerance in machining and assembly. In the error analysis, a criterion to be considered during designing and manufacturing is proposed by quanti- tatively analyzing the effect of DTG performance by tolerances. The theory of dynamic balancing is deduced and unbalance is reduced through experiment.

• Architectural research
• /
• v.18 no.3
• /
• pp.103-111
• /
• 2016

This paper investigates the characteristics of preservation of Korean modern architecture through Western historic preservation theories and philosophies. This research focuses on the Japanese Government-General of Korea (1926-1995) which was built in 1926 and used as the chief administrative building in Seoul (Keijo in Japanese) during the Japanese colonial period (1910-1945). After Korea was liberated from Japanese rule in 1945, this building was used until 1995 for the South Korean National Assembly, the United States Army Military Government in Korea, and the National Museum of South Korea. Although it served a variety of roles, this building was the most controversial case of historic preservation in Korean modern architecture. To analyze the peculiarities and characteristics of Korean modern architecture and its preservation, this research applied Western historic preservation theories, not exclusively from classical historic preservation theories developed by Viollet-le-Duc and John Ruskin, but also from modern historic preservation theories by Theodore H. M. Prudon, Daniel Blunstone, and Frances A. Yates. This cross-cultural and comparative study of historic preservation helps identify Korean modern architecture's characteristics. It can also be a useful reference in finding the origins of Korean modern architectural identity.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.437-446
• /
• 2006

Laser vision inspection systems are becoming popular for automated inspection of manufactured components. The performance of such systems can be enhanced by improving accuracy of the hardware and robustness of the software used in the system. This paper presents a new approach for enhancing the capability of a laser vision system by applying hardware compensation and using efficient analysis software. A 3D geometrical model is developed to study and compensate for possible distortions in installation of gantry robot on which the vision system is mounted. Appropriate compensation is applied to the inspection data obtained from the laser vision system based on the parameters in 3D model. The present laser vision system is used for dimensional inspection of car chassis sub frame and lower arm assembly module. An algorithm based on simplex search techniques is used for analyzing the compensated inspection data. The details of 3D model, parameters used for compensation and the measurement data obtained from the system are presented in this paper. The details of search algorithm used for analyzing the measurement data and the results obtained are also presented in the paper. It is observed from the results that, by applying compensation and using appropriate algorithms for analyzing, the error in evaluation of the inspection data can be significantly minimized, thus reducing the risk of rejecting good parts.