Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Malfunction Pattern Distinction of an Automotive Electric part by Sound and Vibration Frequency Analysis

소음진동 주파수분석을 이용한 자동차 전동부품의 고장유형 분석

  • Sim, Han-Sub (Dept. of Automotive Engineering, Gyeongsang NationalUniversity)
  • 심한섭 (경상국립대학교 자동차공학과)
  • Received : 2021.09.29
  • Accepted : 2021.10.20
  • Published : 2021.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The usage of electric-powered components consisting of several electrical and mechanical parts is continuously increasing in automobiles. Therefore, continuous assessment of the reliability and quality of these electric-powered parts is crucial. In this study, a noise and vibration measurement system for testing and evaluating the different electric-powered parts of automobiles was designed. Further, an FFT analysis was performed on some electric-powered steering assembly test equipment. In the FFT analysis of the noise and vibration signals for each essential fault part, the vibration FFT analysis was significantly compared with the noise analysis. The results showed that the vibration FFT analysis was more effective in determining the reliability and quality of the electric-powered parts.

Keywords

Acknowledgement

This study was supported by the Gyeongsang National University Grant in 2020 to 2021.

References

  1. Lee, M. H., Kim, I. Y., Lee, C. S., "Characteristic Comparison of Brushless Motor Type for EPS System", Transactions of KSAE, Vol. 20, No. 1, pp. 53-60, 2012.
  2. Lee, J. J., Lee, H. C., Kim, J. W., Jeong, J. O., "Model-Based Fault Detection and Isolation for Electric Power Steering System", KSAE Spring Conference, pp. 2207-2212, 2007.
  3. Fan, C. S., Guo, Y. L., "Design of the Auto Electric Power Steering System Controller", Procedia Engineering, Vol. 29, pp. 3200-3206, 2012. https://doi.org/10.1016/j.proeng.2012.01.466
  4. Lee, G. S., Kim, B. J., Son, Y. S., Yi, K. S., "Time Delay Controller (TDC) Design of Electric Power Steering (EPS) for Lateral Control in Automated Vehicles", The Korean Society of Mechanical Engineers, Spring Conference, pp. 68-69, 2015.
  5. Park, H. Y., Kim, J. Y., Kang, J. H., "Analysis of Vibration Noise Spectrum in Motor-Driven Power Steering System", Journal of Sensor Science and Technology, Vol. 27, No. 2, pp. 126-131, 2018. https://doi.org/10.5369/JSST.2018.27.2.126
  6. Kim, T. S., "A study on noise and vibration characteristics of column type electric power steering", Master's degree theses, Seoul National University, 2012.
  7. Cho, Y. J., Yun, H. Y., Hong, H. G., Oh, J. S., Park, H. C., Kang, M. S., Seo, K. H., Lee, Y. T., "Development of Autonomous Steering Platforms for Upland Furrow", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 20, No. 9, pp. 70~75, 2021.