• Composites Research
• /
• v.36 no.5
• /
• pp.349-354
• /
• 2023

Poly(3-hexylthiophene) (P3HT) is a conjugated polymer that is highly soluble in organic solvents and is readily available. However, its electrical properties as an active channel in electronic devices are not enough for practical applications, necessitating further improvement in the properties. In this study, we demonstrate that the blending of two P3HT polymers (i.e., regio-regular (RR) P3HT and regio-random (RRa) P3HT) with different regioregularities can significantly improve charge transport characteristics of the blend films. The morphological and electrical properties of the blend films were systematically investigated by varying the ratio between two P3HT polymers. Atomic force microscopy (AFM), X-ray diffraction (XRD), and UV-visible absorption spectroscopy (UV-vis) were employed to evaluate the morphological and optoelectronic properties of the blend films. The crystallinity of the blend films increased with increasing the content of RRa-P3HT to 20 wt% and gradually decreased as the content increased to 80%. Consistently, the highest charge carrier mobility was obtained from the blend films containing 20 wt% RRa-P3HT, which value was measured to be 0.029 cm²/V·s. The values gradually decreased to 0.0007 cm²/V·s with increasing the content of RRa-P3HT to 80 wt%.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.43
• /
• pp.201-238
• /
• 2009

The purpose of this paper is to describe the contents and issues of the draft legislation of Part VI the Carriage by Air of Korean Commercial Code in respect of the domestic carriage of cargo by air, comparing to the related provisions of the Montreal Convention of 1999 for the unification of certain rules for international carriage by air and the related provisions of Korean Commercial Code in respect of the carriage by land and sea. The Montreal Convention in respect of the international carriage by air was adopted in 1999, and Korea has ratified the Montreal Convention in 2007. However, there is now no national legislation in respect of the carriage by air in Korea. Thus, the Ministry of Justice has prepared the draft legislation of Part VI the Carriage by Air of the Korean Commercial Code in July 2008, and the draft legislation is now being reviewed by the National Assembly. The draft provisions of Part VI the Carriage by Air are basically adopting most of the related provisions of the Montreal Convention in respect of the carriage of cargo by air and some draft provisions are applying the related provisions of the Korean Commercial Code in respect of the carriage of cargo by land and sea. In respect of the carriage of cargo by air, the contents of the draft legislation of Part VI the Carriage by Air are composed of the provisions in respect of the liability of the carrier, the rights of the consignor and consignee, the transport document and others. In respect of the carriage of cargo by air, the issues on the draft legislation of Part VI the Carriage by Air are the problems with respect to the extinguishment of the liability of the carrier, the application for the non-contractual claim, the liability limit of the servants or agents of the carrier, the right of disposition of cargo, the effect of breach of the provision in respect of the air transport document, the prescription of claim of the carrier, the immunity reasons from liability of the carrier for the loss or damage of the cargo, the making out of the air waybill, and the effect of the statement of the air transport document. In conclusion, the national legislation of Part VI the Carriage by Air of the Korean Commercial Code will protect the right and interest of the consignor and consignee, and clarify the right and duty of the parties to the air transport. Also it will contribute to the development of the air transport industry in Korea.

• The Journal of Korean Philosophical History
• /
• no.29
• /
• pp.311-349
• /
• 2010

This report introduces the papers on Japanese Confucianism and Kokugaku thought written in Japanese, Korean, Chinese language and English during 2008. In this paper the data is based on the periodicals index databases of the digital libraries such as the National Diet Library of Japan, the China Academic Journal of China, the National Central Library of Taiwan and the National Assembly Library of Korea and so on. There were 42 articles published on the Japanese Confucian School. In the articles, 29 ones were written in Japanese, 7 in Korean, 4 in Chinese, and 2 in English. 54 articles were published on Yangming School, 41 written in Japanese, 2 in Korean, 10 in Chinese, 1 in English. 50 ones also published on Kohaku School or Mitogaku School. In the articles there were 32 ones written in Japanese, 7 in Korean, 9 in Chinese, 2 in English. And 58 ones on Kokugaku School were published, 51 were written in Japanese, 4 in Korean, 1 in Chinese, 2 in English. Totally 204 articles were written in Japanese, Korean, Chinese, or English language in 2008 throughout the world. This report is divided into 4 chapters, such as Chapter 1 - Syusigaku School, Chapter 2 - Youmeigaku school, Chapter 3 - Kohaku School and Mitogaku School and Chapter 4 - Kokugaku School. In each chapter, some articles are briefly introduced and some are in detail.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.269-281
• /
• 2008

Fatigue or overload can result in mechanical problems of implant components. The mechanical strength in the implant system is dependent on several factors, such as screw and fixture diameters, material, and design of the fixture-abutment connection and abutment. In these factors, the last rules the strength and stability of the fixture-abutment assembly. There have been some previous reports on the mechanical strength of the fixture-abutment assembly with the compressive bending test or short-term cyclic loading test. However, it is restrictive to predict the long-term stability of the implant system with them. The purpose of this study was to evaluate the influence of the design of the fixture-abutment connection and abutment on the mechanical strength and failure mode by conducting the endurance limit test as well as the compressive bending strength test. Tests were performed according to a specified test(ISO/FDIS 14801) in 4 fixture-abutment assemblies of the Osstem implant system: an external butt joint with Cemented abutment (group BJT), an external butt joint with Safe abutment (group BJS), an internal conical joint with Solid abutment (group CJO), and an internal conical joint with ComOcta abutment (group CJT). The following conclusions were drawn within the limitation of this study. Compressive bending strengths were decreased in order of group BJS(1392.0N), group CJO(1261.8N), group BJT(1153.2N), and group CJT(1110.2N). There were no significant differences in compressive bending strengths between group BJT and group CJT(P>.05). Endurance limits were decreased in order of group CJO(600N), group CJT(453N), group BJS(360N), and group BJT(300N). 3. Compressive bending strengths were influenced by the connection and abutment design of the implant system, however endurance limits were affected more considerably by the connection design.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.635-640
• /
• 2016

Although microbial fuel cell (MFC) can produce electricity from organics in wastewater, nitrogen removal is required for application of process for wastewater treatment plant. This study developed flat-panel air-cathode MFCs (FA-MFCs) comprised of two large separator electrode assemblies (SEAs) and evaluate total nitrogen removal according to three inoculum sources and pre-nitrification acclimation. The nitrification efficiencies were >99% regardless of inoculum sources under the phase for pre-nitrification acclimation. The total nitrogen removal efficiencies of FA-MFCs without pre-nitrification acclimation were the highest at the low organic conditions (<300 mg-COD/L) under the phase for nitrification and denitrification. The increase of organic concentration influenced the total nitrogen removal efficiency, positively. The organics were removed >95% but were not used for heterotrophic denitrification totally. This study suggests that application of FA-MFC system for wastewater treatment can allow the simultaneous removal of organic and nitrogen compounds, although this affects the low electricity production.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.336-343
• /
• 2018

We herein present the design and fabrication of a Rx core chip operating in the X-band (10.5~13 GHz) using Win's commercial $0.25-{\mu}m$ GaAs pHEMT process technology. The X-band core chip comprises a low-noise amplifier, a four-bit phase shifter, and a serial-to-parallel data converter. The size is $1.75mm{\times}1.75mm$, which is the state-of-the-art size. The gain and noise figure are more than 10 dB but less than 2 dB, and both the input and output return losses are less than 10 dB. The RMS phase error is less than $5^{\circ}$, and the P1dB is 2 dBm at 12.5 GHz, the performance of which is equivalent to other GaAs core chips. The fabricated core chip was packaged in a QFN package type with a size of $3mm{\times}3mm$ for the convenience of assembly. We confirmed that the performance of the packaged core chip was almost the same as that of the chip itself.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.305-309
• /
• 2016

Recently, there are many efforts focused on development of more economical non-fluorinated membranes for PEMFCs (Proton Exchange Membrane Fuel Cells). In this study, to test the durability of sPEEK MEA (Membrane and Electrode Assembly), ADT (Accelerated Degradation Test) of MEA degradation was done at the condition that membrane and electrode were degraded simultaneously. Before and after degradation, I-V polarization curve, hydrogen crossover, electrochemical surface area, membrane resistance and charge transfer resistance were measured. Although the permeability of hydrogen through sPEEK membrane was low, sPEEK membrane was weaker to radical evolved at low humidity and OCV condition than fluorinated membrane such as Nafion. Performance after MEA degradation for 144 hours and 271 hours were reduced by 15% and 65%, respectively. It was showed that the main cause of rapid decrease of performance after 144 hours was shorting due to Pt/C particles in the pinholes.

• Korean Journal of Clinical Pharmacy
• /
• v.25 no.1
• /
• pp.18-26
• /
• 2015

Background: The recent change in pharmaceutical education system following the paradigm shift to patient-oriented pharmacy service requires an in-depth discussion to reorganize a future direction and establish a basis for maximizing social values of community pharmacy service. Objective: This study was conducted to review the current status of community pharmacy service provision in Korea based on published literatures. Methods: The electronic databases of National Digital Science Library and Electronic National Assembly Library were used to search the journal articles and dissertation papers. A search term "community pharmacy" was used and the published period was limited to papers published after year 2001, when the legal separation of prescribing and dispensing was implemented. Relevant study reports were also searched manually. Information about pharmacy service provision and study outcomes were retrieved from the selected papers, and classified by predefined individual service scope. Results: A total 33 papers reporting services provided by community pharmacies were selected (journal article 11, dissertation paper 17, and study report 5). Pharmacy services identified in these papers could be classified into prescription dispensing service, pharmaceutical care service, self medication service, other products service, and health promotion service. Twenty papers reported prescription dispensing services, three papers reported pharmaceutical care service, and only two papers reported health promotion service. Current community pharmacy services are highly dependent on prescription drugs while expanded services such as pharmaceutical care and health promotion are peripheral. Most prevalent research topic was medication counseling service (18 papers), reflecting that community pharmacists generally consider it to be the most important and fundamental service. Overall, current pharmacy services are very limited and focus on prescription dispensing service. Conclusion: At this point of time requiring expansion and quality improvement of community pharmacy services, we suggest further lively discussion to strengthen pharmacist's functional identity and set conditions for providing socially expected services.

• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.571-578
• /
• 2017

Bubbles are generated by the boiling of the cooling water when an accident occurs in the reactor and then in order to measure the void fraction, the Optical Fiber Probe(OFP) and optical camera are used in thermal hydraulic safety research. However, such an optical method is not suitable for measuring the void fraction in a $17{\times}17$ array of fuel rods due to the geometrical limitations. This study was conducted as a preliminary study using x-ray system and various phantoms before applying to rod bundles. Through radiographic and tomographic experiments, the tube voltage of the x-ray generator was 130 kVp and the tube current was 1 mA. In addition, it is possible to measure the hole of 1mm in size visually through the bubble resolution phantom, and it is confirmed that the contrast is relatively decreased in the inside of the freon in the case of the contrast evaluation using the road phantom. However, we could obtain good image without distortion when reconstructing the image. Bubble generation phantom experiments were used to confirm the flow direction of the bubbles and to acquire tomography images. The image J tool was used to measure the void fraction of 18 % for a single tomography image. This study has carried out previous researches for the measurement of the bubble rate around the nuclear fuel and could be used as a basic research for continuous research.

• Journal of the Korean Electrochemical Society
• /
• v.21 no.2
• /
• pp.39-46
• /
• 2018

Many studies on the electrochemical performance of Li secondary batteries have been obtained using coin-type cells due to the ease of assembly, low cost and ensuring reproducibility. The coin-type cell consists of a case, a gasket, a spacer disk, and a wave spring. These structural features require a greater amount of liquid electrolyte to assemble than other types of cells such as laminated cells and cylindrical cells. Nevertheless, little research has been conducted on the effect of excess liquid electrolytes on the electrochemical performances of Li secondary batteries. In this study, we investigate the effect of different amounts of electrolyte on the coin-type cells. The amount of electrolytes is adjusted to 30 and $100mg\;mAh^{-1}$. Cycle performances at room temperature ($25^{\circ}C$) and high temperature ($60^{\circ}C$) and high voltage are performed to investigate the electrochemical properties of the different amount of electrolytes. In the case of the unit cell including the electrolyte of $30mg\;mAh^{-1}$, the discharging capacity retention characteristic is excellent in comparison with the case of $100mg\;mAh^{-1}$ under the high temperature and high voltage condition. The former shows a larger increase in internal resistance than the latter, confirming that the amount of electrolyte significantly influences the discharge capacity retention characteristics of the battery.